DataSheet26.com

SA2532UP PDF даташит

Спецификация SA2532UP изготовлена ​​​​«Sames» и имеет функцию, называемую «VERSATILE SINGLE CHIP TELEPHONE».

Детали детали

Номер произв SA2532UP
Описание VERSATILE SINGLE CHIP TELEPHONE
Производители Sames
логотип Sames логотип 

22 Pages
scroll

No Preview Available !

SA2532UP Даташит, Описание, Даташиты
sames
SA2532
SA2532 A/C/U
VERSATILE SINGLE CHIP TELEPHONE
FEATURES
n Speech circuit, LD/MF Dialler and Tone
Ringer on one 28 pin CMOS chip
n Soft clip to avoid harsh distortion
n Line Loss Compensation selectable by
pin option
n Power down mode
n Versatile applications for different PTT
demands
n 31 digit last number redial
n Sliding Cursor protocol with comparison
n 2 Flash keys, 100 ms and 280 ms (option
600 ms)
n Pause key for 3 sec Auto Pause or Wait
Function
n Ring frequency discrimination
n Operating range from 13 to 100 mA
(down to 5 mA with reduced perform-
ance)
n Low noise (max. -72dBmp)
n Real or Complex impedance on chip pro-
grammable
n LD/MF switchable dialling
n On chip MF filter (CEPT CS 203 compat-
ible)
n 3-tone melody generator with selectable
repetition rates
GENERAL DESCRIPTION
The SA2532 is a CMOS integrated circuit that
contains all the functions needed to form a
high performance electronic telephone.
The device incorporates LD/MF dialling,
melody generation, ring frequency discrimi-
nation and a high quality speech circuit.
A RAM is on chip for a 31 digit last number
redial. The sliding cursor procedure makes
Last Number Redial easy behind a PABX.
The versatility of the circuit is provided by on
chip programmability and a few external com-
ponents. This allows easy adaption to differ-
ent PTT requirements without changing the
PCB of the telephone.
PACKAGE
Available in 28 pin DIP and SOIC
LS
RO2
RO1
VDD
AGND
STB
CI
MO
LLC
HS DP
OSC
RR
C4
C3
1 28
SA2532
14 15
RI
LI
VSS
CS
M2
M1
MODE
FCI
R1
R2
R3
R4
C1
C2
sames
4153
DR-00975
PDS039-SA2532-001 Rev. C
1/22
1/22
23-10-1995









No Preview Available !

SA2532UP Даташит, Описание, Даташиты
SA2532
PIN DESCRIPTION
Pin# Symbol Function
23 M1
Microphone Inputs
24 M2
Differential inputs for the microphone (electret).
3 RO1 Receiver Outputs
2 RO2 These are the outputs for driving a dynamic earpiece with an impedance
of 100 to 300
5A
Analog Ground
GND
This is the analog ground for the amplifiers.
28 RI
Receive Input
This is the input for the receive signal.
6 STB Side Tone Balance Input
This is the input for side tone cancellation.
1 LS
Line Current Sense Input
This is the input for sensing the line current.
27 LI
Line Input
This input is used for power extraction and line current sensing.
25 CS
Current Shunt Control Output
This N-channel open drain output controls the external high power shunt
transistor for the modulation of the line voltage and for shorting the line
during make period of pulse dialling.
4 VDD
Positive Voltage Supply
This is the supply pin for the circuit.
26 V
SS
8 MO
Negative Power Supply
Melody Output
Pulse Density Modulated output of the melody generator for tone ringer. At
high impedance when not active.
21 FCI
Frequency Comparator Input
This is a Schmitt trigger input for ring frequency discrimination. Disabled
during off-hook.
10 HS/DP Hook Switch Input and Dial Pulse Output
This is an I/O that is pulled high by the hook switch when off- hook. An open
drain pulls it low during break periods of pulse dialling and flash.
11 OSC
Oscillator Input
Oscillator pin for Xtal or ceramic resonator (3.58 MHz).
9 LLC Line Loss Compensation
Select pin for line loss compensation.
12 RR
Repetition Rate
Select pin for repetition rate of melody.
22 MODE Signalling Mode Select Input
Mode pin Function
High
LD default mode, make/break = 33/66 ms
Open
MF only
Low LD default mode, make/break = 40/60 ms
20 R1
Keyboard Rows
19 R2
18 R3
17 R4
16 C1
Keyboard Columns
15 C2
14 C3
13 C4
7 CI
Complex Impedance Input
Input pin for the capacitor in the complex impedance
2/22 sames









No Preview Available !

SA2532UP Даташит, Описание, Даташиты
SA2532
FUNCTIONAL DESCRIPTION
Power On Reset
The on chip power on reset circuit monitors the supply voltage (VDD). When VDD rises above
approx. 1.2V, a power on reset occurs to assure correct start-up and the RAM is cleared.
DC Conditions
The normal operating range is from 13mA to 100 mA. Operating range with reduced
performance is from 5mA to 13mA. In the operating range all functions are operational.
In the line hold range from 0 to 5 mA the device is in a power down mode and the voltage at
LI is reduced to maximum 3.5V.
The dc characteristic (excluding diode bridge and Pulsing transistors) is determined by the
voltage at LI and the resistor R1 as follows:
VLS = VLI + ILine.R1
The voltage at LI is 4.5V.
During pulse dialling the speech circuit and other parts of the device not required are in a
power down mode to save current. The CS pin is pulled to VSS in order to turn the external
shunt transistor on to keep a low voltage drop at the LS pin during make periods.
AC Impedance
The Characteristic or Output impedance of the SA2532 is set within the IC and adjusted by
Mask Options. Available options are for 600and 1000. When the 1000option is selected
then a capacitor may be added to the circuit at pin CI to add a reactive element and make the
output impedance complex.
Oscillator
All the Timing Functions of the SA2532 are based on a Clock Frequency of 3.58MHz. A crystal
or ceramic resonator of this frequency should be connected to the OSC pin. In practise minor
deviations from the nominal frequency may occur due to the characteristics of the frequency
reference device used and so it is recommended that care is taken in the selection of
components.
In some cases a small value capacitor ( 47pF) may have to be connected in parallel with the
Frequency Reference to ensure start-up and/or operation at the nominal frequency.
Speech Circuit
The speech circuit consists of a transmit and a receive path with soft clip, mute, line loss
compensation and side tone cancellation.
Transmit
The gain of the transmit path is 35 dB for M1/M2 to LS (see test circuit figure 5). The
microphone input is differential with an input impedance of 25 k.
The soft clip circuit limits the output voltage at LI to 2.0VPEAK. The attack time is 30µs/6dB
and the decay time is 20 ms/6 dB. When mute is active, during dialling or after pressing
the MUTE key, the gain is reduced by > 60 dB.
sames
3/22










Скачать PDF:

[ SA2532UP.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
SA2532UPVERSATILE SINGLE CHIP TELEPHONESames
Sames
SA2532USVERSATILE SINGLE CHIP TELEPHONESames
Sames

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск