|
|
PDF SAA3004 Data sheet ( Hoja de datos )
| Número de pieza | SAA3004 | |
| Descripción | Remote control transmitter | |
| Fabricantes | Philips | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SAA3004 (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
INTEGRATED CIRCUITS
DATA SHEET
SAA3004
Remote control transmitter
Product specification
File under Integrated Circuits, IC02
August 1982
1 page  
Philips Semiconductors
Remote control transmitter
Product specification
SAA3004
Output sequence (data format)
The output operation will start when the selected code is found. A burst of pulses, including the latched address and
command codes, is generated at the output REMO as long as a key is pressed. The format of the output pulse train is
given in Figs 2 and 3. The operation is terminated by releasing the key or if more than one key is pressed at the same
time. Once a sequence is started, the transmitted words will always be completed after the key is released.
The toggle bits T0 and T1 are incremented if the key is released for a minimum time tREL (see Fig.4).
The toggle bits remain unchanged within a multiple key-stroke sequence.
REF = reference time; T0 and T1 = toggle bits; S0, S1 and S2 = system address; A, B, C, D, E and F = command bits
(a) flashed mode: transmission with 2 toggle bits and 3 address bits, followed by 6 command bits (pulses are flashed).
(b) modulated mode: transmission with reference time, 1 toggle bit and 3 address bits, followed by 6 command bits (pulses are modulated).
Fig.2 Data format of REMO output; .
(1) Flashed pulse.
(2) Modulated pulse (tPW = (5 × tM) + tMH.
August 1982
Fig.3 REMO output waveform.
5
5 Page 
Philips Semiconductors
Remote control transmitter
Product specification
SAA3004
CHARACTERISTICS
VSS = 0 V; Tamb = 25 °C; unless otherwise specified
PARAMETER
Supply voltage
Tamb = 0 to +70 °C
Supply current; active
fOSC = 455 kHz;
REMO output unloaded
Supply current; inactive
(stand-by mode)
Tamb = 25 °C
Oscillator frequency
(ceramic resonator)
Keyboard matrix
VDD (V) SYMBOL
MIN.
−
VDD
4
6 IDD −
9 IDD −
6 IDD −
9 IDD −
4 to 11
fOSC
400
Inputs SEN0N to SEN6N
Input voltage LOW
Input voltage HIGH
Input current
VI = 0 V
Input leakage current
VI = VDD
Outputs DRV0N to DRV6N
Output voltage “ON”
IO = 0,1 mA
IO = 1,0 mA
Output current “OFF”
VO = 11 V
Control input ADRM
4 to 11
4 to 11
4
11
11
VIL
VIH
−II
−II
II
4 VOL
11 VOL
11 IO
−
0,8 × VDD
10
30
−
−
−
−
Input voltage LOW
Input voltage HIGH
Input current (switched P- and
N-channel pull-up/pull-down)
Pull-up active
stand-by voltage: 0 V
Pull-down active
stand-by voltage: VDD
−
−
4
11
4
11
VIL −
VIH 0,2 × VDD
IIL 10
IIL 30
IIH 10
IIH 30
TYP.
−
1
3
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
MAX.
UNIT
11 V
− mA
− mA
2 µA
2 µA
500 kHz
0,2 × VDD
−
100
300
1
V
V
µA
µA
µA
0,3 V
0,5 V
10 µA
0,8 × VDD
−
V
V
100 µA
300 µA
100 µA
300 µA
August 1982
11
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet SAA3004.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SAA3004 | Remote control transmitter | Philips |
| SAA3004P | Remote control transmitter | Philips |
| SAA3004T | Remote control transmitter | Philips |
| SAA3006 | Low Voltage Infrared Remote Control Transmitter |  Signetics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |