SE5532N PDF даташит
Спецификация SE5532N изготовлена «Philips» и имеет функцию, называемую «Internally-compensated dual low noise operational amplifier». |
|
Детали детали
Номер произв | SE5532N |
Описание | Internally-compensated dual low noise operational amplifier |
Производители | Philips |
логотип |
12 Pages
No Preview Available ! |
INTEGRATED CIRCUITS
NE/SA/SE5532/5532A
Internally-compensated dual low noise
operational amplifier
Product specification
IC11 Data Handbook
1997 Sept 29
Philips
Semiconductors
No Preview Available ! |
Philips Semiconductors
Internally-compensated dual low noise
operational amplifier
Product specification
NE/SA/SE5532/5532A
DESCRIPTION
The 5532 is a dual high-performance low noise operational amplifier.
Compared to most of the standard operational amplifiers, such as
the 1458, it shows better noise performance, improved output drive
capability and considerably higher small-signal and power
bandwidths.
This makes the device especially suitable for application in
high-quality and professional audio equipment, instrumentation and
control circuits, and telephone channel amplifiers. The op amp is
internally compensated for gains equal to one. If very low noise is of
prime importance, it is recommended that the 5532A version be
used because it has guaranteed noise voltage specifications.
FEATURES
• Small-signal bandwidth: 10MHz
• Output drive capability: 600Ω, 10VRMS
• Input noise voltage: 5nVń ǸHz (typical)
• DC voltage gain: 50000
• AC voltage gain: 2200 at 10kHz
• Power bandwidth: 140kHz
• Slew rate: 9V/µs
• Large supply voltage range: ±3 to ±20V
• Compensated for unity gain
PIN CONFIGURATIONS
FE, N, D8 Packages
OUTPUT A 1
INVERTING INPUT A 2
NON-INVERTING INPUT A 3
V- 4
A
8 V+
7 OUTPUT B
B
6 INVERTING INPUT B
5 NON-INVERTING INPUT B
TOP VIEW
D Package1
–INA 1
+INA 2
NC 3
–VCC 4
NC 5
NC 6
+INB 7
–INB 8
16 NC
15 NC
14 NC
13 OUTA
12 +VCC
11 OUTB
10 NC
9 NC
TOP VIEW
NOTE:
1. SOL and non-standard pinout.
Figure 1. Pin Configurations
SL00332
ORDERING INFORMATION
DESCRIPTION
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Ceramic Dual In-Line Package (CERDIP)
8-Pin Plastic Dual In-Line Package (DIP)
8-Pin Ceramic Dual In-Line Package (CERDIP)
8-Pin Ceramic Dual In-Line Package (CERDIP)
8-Pin Ceramic Dual In-Line Package (CERDIP)
8-Pin Small Outline Package (SO)
8-Pin Small Outline Package (SO)
8-Pin Small Outline Package (SO)
8-Pin Small Outline Package (SO)
8-Pin Small Outline Package (SO)
8-Pin Small Outline Package (SO)
8-Pin Small Outline Package (SO)
8-Pin Small Outline Package (SO)
16-Pin Plastic Small Outline Large (SOL) Package
16-Pin Plastic Dual In-Line Package (DIP)
TEMPERATURE RANGE
0 to 70°C
–40°C to +85°C
–40°C to +85°C
0 to 70°C
0 to 70°C
0 to 70°C
-55°C to +125°C
-55°C to +125°C
0 to 70°C
–40°C to 85°C
–40°C to 85°C
-55°C to +125°C
0 to 70°C
–40°C to 85°C
–40°C to 85°C
-55°C to +125°C
0 to 70°C
-55°C to +125°C
ORDER CODE
NE5532N
SA5532N
SA5532AN
NE5532FE
NE5532AN
NE5532AF
SE5532FE
SE5532AF
NE5532AD8
SA5532D8
SA5532AD8
SE5532AD8
NE5532D8
SA5532D8
SA5532AD8
SE5532D8
NE5532D
SE5532N
DWG #
SOT97-1
SOT97-1
SOT97-1
0580A
SOT97-1
0580A
0580A
0580A
SOT96-1
SOT96-1
SOT96-1
SOT96-1
SOT96-1
SOT96-1
SOT96-1
SOT96-1
SOT162-1
SOT38-4
1997 Sept 29
2 853-0949 16639
No Preview Available ! |
Philips Semiconductors
Internally-compensated dual low noise
operational amplifier
EQUIVALENT SCHEMATIC (EACH AMPLIFIER)
+
_
Product specification
NE/SA/SE5532/5532A
Figure 2. Equivalent Schematic (Each Amplifier)
SL00333
ABSOLUTE MAXIMUM RATINGS
SYMBOL
PARAMETER
RATING
UNIT
VS
VIN
VDIFF
TA
Supply voltage
Input voltage
Differential input voltage1
Operating temperature range
SA5532/A
NE5532/A
SE5532/A
±22
±VSUPPLY
±0.5
–40 to +85
0 to 70
-55 to +125
V
V
V
°C
°C
°C
TSTG
TJ
PD
Storage temperature
Junction temperature
Maximum power dissipation,
TA=25°C (still-air)2
8 D8 package
8 N package
8 FE package
16 D package
-65 to +150
150
780
1200
1000
1200
°C
°C
mW
mW
mW
mW
TSOLD
Lead soldering temperature (10sec max)
300 °C
NOTES:
1. Diodes protect the inputs against over-voltage. Therefore, unless current-limiting resistors are used, large currents will flow if the differential
input voltage exceeds 0.6V. Maximum current should be limited to ±10mA.
2. Thermal resistances of the above packages are as follows:
N package at 100°C/W
F package at 135°C/W
D package at 105°C/W
D8 package at 160°C/W
1997 Sept 29
3
Скачать PDF:
[ SE5532N.PDF Даташит ]
Номер в каталоге | Описание | Производители |
SE5532 | Internally-compensated dual low noise operational amplifier | Philips |
SE5532 | Internally Compensated Dual Low Noise Operational Amplifier | ON Semiconductor |
SE5532A | Internally-compensated dual low noise operational amplifier | Philips |
SE5532A | Internally Compensated Dual Low Noise Operational Amplifier | ON Semiconductor |
Номер в каталоге | Описание | Производители |
TL431 | 100 мА, регулируемый прецизионный шунтирующий регулятор |
Unisonic Technologies |
IRF840 | 8 А, 500 В, N-канальный МОП-транзистор |
Vishay |
LM317 | Линейный стабилизатор напряжения, 1,5 А |
STMicroelectronics |
DataSheet26.com | 2020 | Контакты | Поиск |