|
|
PDF 74F259 Data sheet ( Hoja de datos )
| Número de pieza | 74F259 | |
| Descripción | Latch | |
| Fabricantes | Philips | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 74F259 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
INTEGRATED CIRCUITS
74F259
Latch
Product specification
IC15 Data Handbook
Philips
Semiconductors
1989 Apr 11
1 page  
Philips Semiconductors
Latch
Product specification
74F259
ABSOLUTE MAXIMUM RATINGS
(Operation beyond the limit set forth in this table may impair the useful life of the device.
Unless otherwise noted these limits are over the operating free air temperature range.)
SYMBOL
PARAMETER
VCC Supply voltage
VIN Input voltage
IIN Input current
VOUT Voltage applied to output in High output state
IOUT Current applied to output in Low output state
Tamb Operating free-air temperature range
Tstg Storage temperature range
RATING
–0.5 to +7.0
–0.5 to +7.0
–30 to +5
–0.5 to VCC
40
0 to +70
–65 to +150
UNIT
V
V
mA
V
mA
°C
°C
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
VCC
VIH
VIL
IIK
IOH
IOL
Tamb
Supply voltage
High-level input voltage
Low-level input voltage
Input clamp current
High-level output current
Low-level output current
Operating free-air temperature range
LIMITS
UNIT
MIN
NOM
MAX
4.5 5.0 5.5 V
2.0 V
0.8 V
–18 mA
–1 mA
20 mA
0 70 °C
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.)
SYMBOL
PARAMETER
TEST
CONDITIONS1
LIMITS
UNIT
MIN TYP2 MAX
VOH High-level output voltage
VOL Low-level output voltage
VIK Input clamp voltage
II Input current at maximum input voltage
IIH High-level input current
IIL Low-level input current
IOS Short-circuit output current3
VCC = MIN, VIL = MAX,
VIH = MIN, IOL = MAX
VCC = MIN, VIL = MAX,
VIH = MIN, IOL = MAX
VCC = MIN, II = IIK
VCC = MAX, VI = 7.0V
VCC = MAX, VI = 2.7V
VCC = MAX, VI = 0.5V
VCC = MAX
±10%VCC 2.5
±5%VCC 2.7 3.4
±10%VCC
0.35 0.50
±5%VCC
0.35 0.50
–0.73 –1.2
100
20
–0.6
–60 –150
V
V
V
V
V
µA
µA
mA
mA
ICC Supply current (total)
ICCH VCC = MAX
24 46 mA
ICCL
37 75 mA
NOTES:
1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type.
2. All typical values are at VCC = 5V, Tamb = 25°C.
3. To reduce the effect of external noise during test.
4. Not more than one output should be shorted at a time. For testing IOS, the use of High-speed test apparatus and/or sample-and-hold
techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting
of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any
sequence of parameter tests, IOS tests should be performed last.
1989 Apr 11
5
5 Page 
Philips Semiconductors
Latch
NOTES
Product specification
74F259
1989 Apr 11
11
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet 74F259.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 74F251 | 8-Input Multiplexer with 3-STATE Outputs |  Fairchild |
| 74F251A | 8-Input Multiplexer with TRI-STATE Outputs |  National Semiconductor |
| 74F251A | 8-input multiplexer 3-State | Philips |
| 74F251A | 8-Input Multiplexer with 3-STATE Outputs | Fairchild |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |