No Preview Available !
September 1986
Revised July 2001
DM7474
Dual Positive-Edge-Triggered D-Type Flip-Flops
with Preset, Clear and Complementary Outputs
General Description
This device contains two independent positive-edge-trig-
gered D-type flip-flops with complementary outputs. The
information on the D input is accepted by the flip-flops on
the positive going edge of the clock pulse. The triggering
occurs at a voltage level and is not directly related to the
transition time of the rising edge of the clock. The data on
the D input may be changed while the clock is LOW or
HIGH without affecting the outputs as long as the data
setup and hold times are not violated. A LOW logic level on
the preset or clear inputs will set or reset the outputs
regardless of the logic levels of the other inputs.
Ordering Code:
Order Number Package Number
Package Description
DM7474M
M14A
14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
DM7474N
N14A
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagram
Function Table
Inputs
Outputs
PR CLR CLK
D
Q
Q
LHXXHL
HLXXLH
L L XXHH
(Note 1) (Note 1)
HH ↑ HH L
HH↑ L LH
H H L X Q0 Q0
H = HIGH Logic Level
X = Either LOW or HIGH Logic Level
L = LOW Logic Level
↑ = Positive-going transition of the clock.
Q0 = The output logic level of Q before the indicated input conditions were
established.
Note 1: This configuration is nonstable; that is, it will not persist when either
the preset and/or clear inputs return to their inactive (HIGH) level.
© 2001 Fairchild Semiconductor Corporation DS006526
www.fairchildsemi.com
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Package Number N14A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A critical component in any component of a life support
device or system whose failure to perform can be rea-
sonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
5 www.fairchildsemi.com