|
|
PDF HMC506LP4 Data sheet ( Hoja de datos )
| Número de pieza | HMC506LP4 | |
| Descripción | MMIC VCO w/ BUFFER AMPLIFIER / 7.8 - 8.7 GHz | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC506LP4 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v00.0804
Typical Applications
Low noise MMIC VCO w/Buffer Amplifier for:
• VSAT Radio
• Point to Point/Multipoint Radio
• Test Equipment & Industrial Controls
• Military End-Use
Functional Diagram
15
HMC506LP4
MMIC VCO w/ BUFFER
AMPLIFIER, 7.8 - 8.7 GHz
Features
Pout: +14 dBm
Phase Noise: -103 dBc/Hz @100 KHz
No External Resonator Needed
Single Supply: +3V @ 77 mA
QFN Leadless SMT Package, 16 mm2
General Description
The HMC506LP4 is a GaAs InGaP Heterojunc-
tion Bipolar Transistor (HBT) MMIC VCO with
integrated resonator, negative resistance device,
varactor diode, and buffer amplifier. Covering
7.8 to 8.7 GHz, the VCO’s phase noise perfor-
mance is excellent over temperature, shock and
vibration due to the oscillator’s monolithic struc-
ture. Power output is +14 dBm typical from a
single supply of +3.0V @ 77 mA. The voltage
controlled oscillator is packaged in a leadless
QFN 4 x 4 mm surface mount package.
15 - 102
Electrical Specifications, TA = +25° C, Vcc = +3V
Parameter
Min.
Frequency Range
Power Output
11.0
SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RF Output
Tune Voltage (Vtune)
1
Supply Current (Icc) (Vcc = +3.0V)
Tune Port Leakage Current
Output Return Loss
Harmonics
2nd
3rd
Pulling (into a 2.0:1 VSWR)
Pushing @ Vtune= +5V
Frequency Drift Rate
Typ.
7.8 - 8.7
14.0
-103
77
7
-16
-28
28
78
0.85
Max.
11
10
Units
GHz
dBm
dBc/Hz
V
mA
µA
dB
dBc
dBc
MHz pp
MHz/V
MHz/°C
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
v00.0804
Evaluation PCB
HMC506LP4
MMIC VCO w/ BUFFER
AMPLIFIER, 7.8 - 8.7 GHz
15
List of Materials for Evaluation PCB 105706*
Item
J1 - J2
J3 - J4
C1
Description
PC Mount SMA RF Connector
DC Pin
4.7 µF Tantalum Capacitor
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown. A
C2 10,000 pF Capacitor, 0603 Pkg.
U1 HMC506LP4 VCO
PCB**
105667 Eval Board
** Circuit Board Material: Rogers 4350
sufficient number of via holes should be used to con-
nect the top and bottom ground planes. The evalua-
tion circuit board shown is available from Hittite upon
request.
* Reference this number when ordering complete evaluation PCB.
15 - 106
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC506LP4.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC506LP4 | MMIC VCO w/ BUFFER AMPLIFIER / 7.8 - 8.7 GHz | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |