HIF3-30CVFA PDF даташит
Спецификация HIF3-30CVFA изготовлена «Hirose Electric» и имеет функцию, называемую «Cover (HIF3B Series) against EMI (Electromagnetic Interference)». |
|
Детали детали
Номер произв | HIF3-30CVFA |
Описание | Cover (HIF3B Series) against EMI (Electromagnetic Interference) |
Производители | Hirose Electric |
логотип |
5 Pages
No Preview Available ! |
Cover (HIF3B Series) against EMI (Electromagnetic Interference)
sFeatures
1. Electromagnetic Shielding Effect
This product enhances shielding effects with a metallic cover
over the ribbon cable connector (HIF3B series).
2. Screw Locking Mechanism
The locking mechanism is designed in a stubborn and
steady structure for the screw type.
sApplications
Peripheral and termination equipment, control machines, measuring
instruments etc.
sOrdering Information
3. Assembling
The ribbon cable connector (HIF3B series) can be easily
assembled.
HIF 3 - * CVFA
q we
q Series Name
: HIF 3
w Number of contacts : 10, 16, 20, 26, 30, 34, 40, 50, 64
e CVFA
: Cover case for EMI
sI/O Cable Termination
sMaterial
Material
Zinc alloy
Finish
Nickel plated
As shown above, bend the shield knitted cord, wind
the conductive tape 1 to 2 turns, and finish cable
termination so as not to loosen the shield knitted cord.
B45
No Preview Available ! |
sCover
Part Number
HIF3-10CVFA
HIF3-16CVFA
HIF3-20CVFA
HIF3-26CVFA
HIF3-30CVFA
HIF3-34CVFA
HIF3-40CVFA
HIF3-50CVFA
HIF3-64CVFA
CL No.
612-0061-4
612-0062-7
612-0063-0
612-0064-2
612-0065-5
612-0066-8
612-0067-0
612-0068-3
612-0070-5
Number of Contacts A
10 8.5
16 7.8
20 9.0
26 10.0
30 9.2
34 11.0
40 13.0
50 14.5
64 15.4
B
8.0
7.8
8.5
9.5
9.2
10.0
10.0
10.0
10.0
Unit : mm
CDE
31.7 38.12 17.52
34.9 41.32 25.14
39.98 46.4 30.22
47.6 54.02 37.84
52.68 59.1 42.92
57.76 64.18 48.0
65.38 71.8 55.62
78.08 84.5 68.32
95.86 102.7 86.1
B46
No Preview Available ! |
sApplicable Socket Connector
Notes1 and 2: The number of polarizing guide and keys change according to products.
Unit : mm
Part Number
CL No. Number of Contacts A B C D
HIF3BA-10D-2.54R-CL(21) 610-0190-4-21
10 17.27 10.16 11.43 12.8
HIF3BA-16D-2.54R-CL(21) 610-0192-0-21
16 24.89 17.78 19.05 20.42
Polarizing guide
Polarizing keyway
One at center
HIF3BA-20D-2.54R-CL(21) 610-0193-2-21
20 29.97 22.86 24.13 25.5
HIF3BA-26D-2.54R-CL(21) 610-0194-5-21
HIF3BA-30D-2.54R-CL(21) 610-0195-8-21
26 37.59 30.48 31.75 33.12 One at center
30 42.67 35.56 36.83 38.2
HIF3BA-34D-2.54R-CL(21) 610-0196-0-21
HIF3BA-40D-2.54R-CL(21) 610-0197-3-21
34 47.75 40.64 41.91 43.28
40 55.37 48.26 49.53 50.9
One on right and left sides, resp.
HIF3BA-50D-2.54R-CL(21) 610-0198-6-21
HIF3BB-50D-2.54R-CL(21) 610-0201-9-21
HIF3BA-64D-2.54R-CL(21) 610-0200-6-21
HIF3BB-64D-2.54R-CL(21) 610-0203-4-21
50 68.07 60.96 62.23 63.6 One on right and left sides, resp.
50 68.07 60.96 62.23 63.6 One at center
64 85.85 78.74 80.01 81.38 One on right and left sides, resp
64 85.85 78.74 80.01 81.38 One at center
sPin Header
The pin header applicable to the socket connector HIF series can wholly use the HIF3 series. It is recommended to
use following products, considering positioning (protection of mating area) when the connector is engaged.
In addition, when the connector is installed, the locking mechanism is removed. If needed, order the product (11)
according to the specification (unlock), as shown below.
HIF3B –*PA–2.54DS,DSA(11)
HIF3BA–*PA–2.54DS,DSA(11)
HIF3BB–*PA–2.54DS,DSA(11)
Note:
HIF3B–*PA–2.54DS, DSA (11) is limited
to number of contacts as follows:
DSA-20, 30, 34, 40 contacts
DSA-26, 50 contacts
B47
Скачать PDF:
[ HIF3-30CVFA.PDF Даташит ]
Номер в каталоге | Описание | Производители |
HIF3-30CVFA | Cover (HIF3B Series) against EMI (Electromagnetic Interference) | Hirose Electric |
Номер в каталоге | Описание | Производители |
TL431 | 100 мА, регулируемый прецизионный шунтирующий регулятор |
Unisonic Technologies |
IRF840 | 8 А, 500 В, N-канальный МОП-транзистор |
Vishay |
LM317 | Линейный стабилизатор напряжения, 1,5 А |
STMicroelectronics |
DataSheet26.com | 2020 | Контакты | Поиск |