DataSheet26.com

NAT7210 PDF даташит

Спецификация NAT7210 изготовлена ​​​​«National Instruments» и имеет функцию, называемую «Reference Manual».

Детали детали

Номер произв NAT7210
Описание Reference Manual
Производители National Instruments
логотип National Instruments логотип 

30 Pages
scroll

No Preview Available !

NAT7210 Даташит, Описание, Даташиты
NAT7210TM
Reference Manual
June 1995 Edition
Part Number 370875A-01
© Copyright 1994, 1995 National Instruments Corporation.
All Rights Reserved.









No Preview Available !

NAT7210 Даташит, Описание, Даташиты
National Instruments Corporate Headquarters
6504 Bridge Point Parkway
Austin, TX 78730-5039
(512) 794-0100
Technical support fax: (800) 328-2203
(512) 794-5678
Branch Offices:
Australia 03 9 879 9422, Austria 0662 45 79 90 0, Belgium 02 757 00 20,
Canada (Ontario) 519 622 9310, Canada (Québec) 514 694 8521,
Denmark 45 76 26 00, Finland 90 527 2321, France 1 48 14 24 24,
Germany 089 741 31 30, Hong Kong 2645 3186, Italy 02 48301892,
Japan 03 5472 2970, Korea 02 596 7456, Mexico 5 202 2544,
Netherlands 03480 33466, Norway 32 84 84 00, Singapore 2265886,
Spain 91 640 0085, Sweden 08 730 49 70, Switzerland 056 20 51 51,
Taiwan 02 377 1200, U.K. 01635 523545









No Preview Available !

NAT7210 Даташит, Описание, Даташиты
Limited Warranty
The NAT7210 integrated circuit (“equipment”) is warranted against defects in material
and workmanship under normal use and service for a period of one (1) year from the date
of shipment from the National Instruments factory. During this period of one year,
National Instruments shall at its sole option either repair, replace, or credit the Buyer for
defective equipment if: (i) Buyer returns the equipment to National Instruments, FOB the
National Instruments factory in Austin, Texas; (ii) Buyer notifies National Instruments
promptly upon discovery of any defect in writing, including a detailed description of the
defect; and (iii) upon examination of the returned equipment, National Instruments is
satisfied that the circuit is defective and that the cause of such defect is not alteration or
repair by someone other than National Instruments, neglect, accident, misuse, improper
installation, or use contrary to any instructions issued by National Instruments.
A Return Material Authorization (RMA) number must be obtained from the factory and
clearly marked on the outside of the package before any equipment will be accepted for
warranty work. Prior to issuance of an RMA by National Instruments, Buyer shall allow
National Instruments the opportunity to inspect the equipment on-site at Buyer’s facility.
This warranty expires one year from date of original shipment regardless of any warranty
performance during that warranty period. The warranty provided herein is Buyer’s sole
and exclusive remedy for nonconformity of the equipment or for breach of any warranty.
THE ABOVE IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR
IMPLIED. NATIONAL INSTRUMENTS SPECIFICALLY DISCLAIMS THE
IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A
PARTICULAR PURPOSE. BUYER’S RIGHT TO RECOVER DAMAGES CAUSED
BY FAULT OR NEGLIGENCE ON THE PART OF NATIONAL INSTRUMENTS
SHALL BE LIMITED TO THE AMOUNT THERETOFORE PAID BY THE BUYER.
NATIONAL INSTRUMENTS WILL NOT BE LIABLE FOR DAMAGES RESULTING
FROM LOSS OF DATA, PROFITS, USE OF PRODUCTS, OR INCIDENTAL OR
CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POSSIBILITY
THEREOF. This limitation of the liability of National Instruments will apply regardless
of the form of action, whether in contract or tort, including negligence. National
Instruments recommends against the use of its products as critical components in any life
support devices or systems whose failure to perform can reasonably be expected to cause
significant injury to a human. Buyer assumes all risk for such application and agrees to
indemnify National Instruments for all damages which may be incurred due to use of the
National Instruments standard devices in medical or life support applications. Any action
against National Instruments must be brought within one year after the cause of action
accrues.
National Instruments believes that the information in this manual is accurate. The
document has been carefully reviewed for technical accuracy. In the event that technical
or typographical errors exist, National Instruments reserves the right to make changes to
subsequent editions of this document without prior notice to holders of this edition. The
reader should consult National Instruments if errors are suspected. In no event shall
National Instruments be liable for any damages arising out of or related to this document
or the information contained in it.










Скачать PDF:

[ NAT7210.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
NAT7210Reference ManualNational Instruments
National Instruments
NAT7210APDIEEE 488.2 Controller ChipNational Instruments
National Instruments

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск