DataSheet26.com

OPA725 PDF даташит

Спецификация OPA725 изготовлена ​​​​«Burr-Brown Corporation» и имеет функцию, называемую «(OPA725 - OPA726) 12V CMOS Operational Amplifier».

Детали детали

Номер произв OPA725
Описание (OPA725 - OPA726) 12V CMOS Operational Amplifier
Производители Burr-Brown Corporation
логотип Burr-Brown Corporation логотип 

20 Pages
scroll

No Preview Available !

OPA725 Даташит, Описание, Даташиты
OPA725, OPA2725
OPA726, OPA2726
SBOS278B − SEPTEMBER 2003 − REVISED JANUARY 2004
Very Low Noise, High-Speed, 12V CMOS
Operational Amplifier
FEATURES
D BANDWIDTH: 20MHz
D SLEW RATE: 30V/µs
D FAST 16-BIT SETTLING TIME
D LOW NOISE: 6nV/Hz (typ) at 100kHz
D EXCELLENT CMRR, PSRR, and AOL
D RAIL-TO-RAIL OUTPUT
D CM RANGE INCLUDES GND
D THD+N: 0.0003% (typ) at 1kHz
D QUIESCENT CURRENT: 5.5mA/ch (max)
D SUPPLY VOLTAGE: 4V to 12V
D SHUTDOWN MODE (OPAx726): 6µA/ch
APPLICATIONS
D OPTICAL NETWORKING
D TRANSIMPEDANCE AMPLIFIERS
D INTEGRATORS
D ACTIVE FILTERS
D A/D CONVERTER BUFFERS
D I/V CONVERTER FOR DACs
D PORTABLE AUDIO
D PROCESS CONTROL
D TEST EQUIPMENT
OPA725 RELATED PRODUCTS
FEATURES
10MHz, 16V, 16V/µs, 8.5nV/Hz at 1kHz
8MHz, 36V, FET Input, 20V/µs, 8.5nV/Hz at 1kHz
100MHz, 5.5V, Precision Transimpedance Amplifier
500MHz, ±5V, FET Input, 290V/µs, 7nV/Hz at 100kHz
7MHz, 12V, RRIO, 10V/µs, 30nV/Hz at 10kHz
16-Bit, 250kSPS, 4-Channel, Parallel Output ADC
PRODUCT
TLC080
OPA132
OPA380
OPA656
OPA743
ADS8342
DESCRIPTION
The OPA725 and OPA726 series op amps use a
state-of-the-art 12V analog CMOS process, and combine
outstanding ac performance with low bias current and
excellent CMRR, PSRR, and AOL. The 20MHz
Gain-Bandwidth (GBW) Product is achieved by using a
proprietary and patent-pending output stage design.
These characteristics allow excellent 16-bit settling times
for driving 16-bit Analog-to-Digital converters (ADCs).
Excellent ac characteristics, such as 20MHz GBW, 30V/µs
slew rate and 0.0003% THD+N make the OPA725 and
OPA726 well-suited for communication, high-end audio,
and active filter applications. With a bias current of less
than 200pA, they are well-suited for use as
transimpedance (I/V-conversion) amplifiers for monitoring
optical power in ONET applications.
The OPA725 and OPA726 op amps can be used in
single-supply applications from 4V up to 12V, or
dual-supply from ±2V to ±6V. The output swings to within
150mV of the rails, maximizing dynamic range. The
shutdown versions (OPAx726) reduce the quiescent
current to less than 6µA and feature a reference pin for
easy shutdown operation with standard CMOS logic in
dual-supply applications.
The OPA725 (single) is available in SOT23-5 and SO-8
packages, and the OPA2725 (dual) is available in MSOP-8
and SO-8 packages. The OPA726 (single with shutdown)
is available in MSOP-8 and SO-8. The OPA2726 (dual with
shutdown) is available in MSOP-10. All versions are
specified for operation from −40°C to +125°C.
+12V
+5V +5V
75
OPA725
λ
O PA726
VOUT
VIN
±2.5V
330pF
AIN
ADS8342
16−Bit ADC
Enable
5V
Common
VB 5V
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Products
conform to specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all parameters.
Copyright 2003−2004, Texas Instruments Incorporated
www.ti.com









No Preview Available !

OPA725 Даташит, Описание, Даташиты
OPA725, OPA2725
OPA726, OPA2726
SBOS278B − SEPTEMBER 2003 − REVISED JANUARY 2004
www.ti.com
ORDERING INFORMATION
PRODUCT
PACKAGE-LEAD
PACKAGE
DESIGNATOR(1)
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER
TRANSPORT
MEDIA, QUANTITY
Non-Shutdown
OPA725
OPA725
OPA2725
OPA2725
SOT23-5
SO-8
SO-8
MSOP-8
DBV
D
D
DGK
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
OALI
OPA725A
OPA2725A
BGM
OPA725AIDBVT
OPA725AIDBVR
OPA725AID
OPA725AIDR
OPA2725AID
OPA2725AIDR
OPA2725AIDGKT
OPA2725AIDGKR
Tape and Reel, 250
Tape and Reel, 3000
Rails, 100
Tape and Reel, 2500
Rails, 100
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 2500
Shutdown
OPA726
OPA726
SO-8
MSOP-8
D
DGK
−40°C to +125°C
−40°C to +125°C
OPA726A
BHC
OPA726AID
OPA726AIDR
OPA726AIDGKT
OPA726AIDGKR
Rails, 100
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 2500
OPA2726
MSOP-10
DGS
−40°C to +125°C
BHB
OPA2726AIDGST Tape and Reel, 250
OPA2726AIDGSR Tape and Reel, 2500
(1) For the most current package and ordering information, see the Package Option Addendum located at the end of this datasheet.
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be
handled with appropriate precautions. Failure to observe
proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to
complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could
cause the device not to meet its published specifications.
ABSOLUTE MAXIMUM RATINGS(1)
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +13.2V
Signal Input Terminals, Voltage(2) . . . . . . . . . −0.5V to (V+) + 0.5V
Current(2) . . . . . . . . . . . . . . . . . . . ±10mA
Output Short Circuit(3) . . . . . . . . . . . . . . . . . . . . . . . . . Continuous
Operating Temperature . . . . . . . . . . . . . . . . . . . . . −55°C to +125°C
Storage Termperature . . . . . . . . . . . . . . . . . . . . . . −55°C to +150°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Lead Temperature (soldering, 10s) . . . . . . . . . . . . . . . . . . . . +300°C
ESD Rating (Human Body Model) . . . . . . . . . . . . . . . . . . . . 1000 V
(1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods
may degrade device reliability. These are stress ratings only, and
functional operation of the device at these or any other conditions
beyond those specified is not supported.
(2) Input terminals are diode-clamped to the power-supply rails.
Input signals that can swing more than 0.5V beyond the supply
rails should be current limited to 10mA or less.
(3) Short-circuit to ground, one amplifier per package.
2









No Preview Available !

OPA725 Даташит, Описание, Даташиты
www.ti.com
PIN CONFIGURATIONS
OPA725, OPA2725
OPA726, OPA2726
SBOS278B − SEPTEMBER 2003 − REVISED JANUARY 2004
Out 1
V2
+IN 3
OPA725
5 V+
4 IN
SOT23−5
NC(1) 1
IN 2
+IN 3
V4
OPA725
SO−8
8 NC(1)
7 V+
6 OUT
5 NC(1)
OPA726
DGND(2) 1
IN 2
+IN 3
V4
8 Enable
7 V+
6 OUT
5 NC(1)
SO−8, MSOP−8
OPA2725
OUT A 1
IN A 2
+IN A 3
V4
A
B
8 V+
7 OUT B
6 IN B
5 +IN B
SO−8, MSOP−8
OUT A 1
IN A 2
+IN A 3
V4
DGND(2) 5
OPA2726
A
B
MSOP−10
10 V+
9 OUT B
8 IN B
7 +IN B
6 Enable
(1) NC denotes no internal connection.
(2) DGND = reference voltage for Enable Reference pin. Voltage on this pin
will be the voltage to which the Enable Reference pin is referenced.
3










Скачать PDF:

[ OPA725.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
OPA725OPA725 and OPA726 Series: Very Low-Noise High-Speed 12V CMOS Op Amp (Rev. B)Texas Instruments
Texas Instruments
OPA725(OPA725 - OPA726) 12V CMOS Operational AmplifierBurr-Brown Corporation
Burr-Brown Corporation
OPA726OPA725 and OPA726 Series: Very Low-Noise High-Speed 12V CMOS Op Amp (Rev. B)Texas Instruments
Texas Instruments
OPA726(OPA725 - OPA726) 12V CMOS Operational AmplifierBurr-Brown Corporation
Burr-Brown Corporation

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск