|
|
Número de pieza | HFD3023 | |
Descripción | Detector Fibre Optic | |
Fabricantes | Honeywell | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HFD3023 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! HFD3023 U.com5 Mbit Direct Coupled Receiver
t4FEATURES
e• Converts fiber optic input signals to TTL digital
eoutputs
h• Typical sensitivity 2 µW (-27 dBm)
S• Single 5 V supply requirement
ta• Direct coupled receiver circuit
a• Open collector output
.D m• Plastic cap with TO-18 header
• Microlens optics for efficient fiber coupling
w o• Designed to operate with Honeywell 850 nm LEDs
wand integrated transmitters
w U.cDESCRIPTION
The HFD3023 is a sensitive Direct Coupled (DC) optical
t4receiver designed for use in short distance, 850 nm fiber
optic systems. The receiver contains a monolithic IC,
consisting of a photodiode, DC amplifier, and open
ecollector Schottky output transistor. The output allows it
to be directly interfaced with standard TTL circuits. The
eHFD3023 receiver is supplied in a Honeywell plastic
package, and can be mounted in several types of fiber
hoptic connectors.
APPLICATION
SThe HFD3023 fiber optic receiver converts the optical
signal in a point to point data communications fiber optic
link to a TTL output. Its 0.006 in. photodiode with a 0.024
tain. microlens (to enhance the optics) is mechanically
centered within the TO-18 package.
Electrical isolation is important in obtaining the maximum
aperformance. A 0.1 µF bypass capacitor must be
connected between VÙÙ and ground. This minimizes
.Dpower supply noise, increasing the signal quality.
Shielding can also reduce coupled noise, through use of
mground plane PCB, shielding around the device, and
shielding around the leads.
w .coThe HFD3023 is designed for a wide optical input range.
The optical input dynamic range is guaranteed from the
Umaximum sensitivity of 3.0 µW to 100 µW or greater than
w t415 dB.
FIBER105.TIF
OUTLINE DIMENSIONS in inches (mm)
WINDOW
.047 (1.19) DIA.
.176 (4.47)
.165 (4.19)
CRUSH RING
.229 (5.82)
.220 (5.59)
.210 (5.33)
.081 (2.06)
.500 MIN
(12.7)
41
2
3
FIBER203.DIM
Pinout
1. VÙÙ
2. Ground
3. Output (TTL)
4. Case (ground)
w ataSheeHoneywell reserves the right to make
h .Dchanges in order to improve design and
wwwsupply the best products possible.
271
1 page HFD3023
5 Mbit Direct Coupled Receiver
Fig. 3 Pulse Width Distortion vs Frequency
FIBER056.GRA
Fig. 4
Propagation Delay Time vs Peak Optical
Input Power
FIBER057.GR
Honeywell reserves the right to make
changes in order to improve design and
supply the best products possible.
h
275
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet HFD3023.PDF ] |
Número de pieza | Descripción | Fabricantes |
HFD3020 | TTL Output Receiver | Honeywell |
HFD3022 | Silicon PIN Photodiode | Honeywell |
HFD3023 | Detector Fibre Optic | Honeywell |
HFD3026 | Analog Output Receiver | Honeywell |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |