DataSheet26.com

78004xx PDF даташит

Спецификация 78004xx изготовлена ​​​​«Linfinity Microelectronics» и имеет функцию, называемую «OP-AMP / SINGLE / BIPOLAR».

Детали детали

Номер произв 78004xx
Описание OP-AMP / SINGLE / BIPOLAR
Производители Linfinity Microelectronics
логотип Linfinity Microelectronics логотип 

9 Pages
scroll

No Preview Available !

78004xx Даташит, Описание, Даташиты
www.DataSheet4U.com
LTR
A
B
C
D
E
F
G
H
J
K
DESCRIPTION
REVISIONS
Pg 2: Added outline letter X. Pg 6: Added package X.
Pg 10: Added package X.
Pg 2, 4, 11: Added device 02.
Pg 2, 4, 5, 8, 12: Added device 03. Pg 10: Correct table II. Pg 11: Correct
6.3
Format changes. Table I corrections. Delete device 03 in X package.
Table I and II corrections. Change package designations for all devices.
Add device 04.
Table I and II corrections, changed to approved source, and general update to
document.
Add one vendor, CAGE 34333. Add two packages, C-2 and D-4. Make
changes to 1.3, 4.3.1, table I, table II, and figure 1. Change to military drawing
format. Delete one vendor, CAGE 04713.
Drawing updated to reflect current requirements. - ro
Add information to paragraph 3.5. - ro
Correction to paragraph 3.5. Editorial changes throughout. - drw
DATE (YR-MO-DA)
78-05-17
79-04-12
80-04-21
80-10-02
81-10-09
83-03-03
90-02-01
01-06-20
04-04-02
05-06-10
APPROVED
N. A. Hauck
N. A. Hauck
N. A. Hauck
N. A. Hauck
N. A. Hauck
N. A. Hauck
M. A. Frye
R. Monnin
R. Monnin
R. Monnin
CURRENT CAGE CODE 67268
THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED.
REV
SHEET
REV
SHEET
REV STATUS
OF SHEETS
PMIC N/A
REV
KK
SHEET
12
PREPARED BY
William E. Shoup
STANDARD
MICROCIRCUIT
DRAWING
THIS DRAWING IS AVAILABLE
FOR USE BY ALL
DEPARTMENTS
AND AGENCIES OF THE
DEPARTMENT OF DEFENSE
CHECKED BY
A. J. Foley
APPROVED BY
N. A. Hauck
DRAWING APPROVAL DATE
78-03-27
AMSC N/A
REVISION LEVEL
www.DataSheet4U.com
K
DSCC FORM 2233
APR 97
KKKKKK
345678
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
http://www.dscc.dla.mil
MICROCIRCUIT, LINEAR, HIGH VOLTAGE
OPERATIONAL AMPLIFIER, MONOLITHIC
SILICON
SIZE
A
SHEET
CAGE CODE
14933
1 OF 8
78003
5962-E656-05









No Preview Available !

78004xx Даташит, Описание, Даташиты
www.DataSheet4U.com
1. SCOPE
1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in
accordance with MIL-PRF-38535, appendix A.
1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example:
78003
01
G
C
Drawing number
Device type
(see 1.2.1)
Case outline
(see 1.2.2)
Lead finish
(see 1.2.3)
1.2.1 Device types. The device types identify the circuit function as follows:
Device type
Generic number
Circuit function
01
LM144
High voltage operational amplifier
02 2640 High voltage operational amplifier
03
LM143
High voltage operational amplifier
04 1536 High voltage operational amplifier
1.2.2 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows:
Outline letter
Descriptive designator
Terminals
Package style
G MACY1-X8
8
P GDIP1-T8 or CDIP2-T8
8
X MACY1-X8
8
2 CQCC1-N20
20
Can
Dual-in-line
Can
Square leadless chip carrier
1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A.
1.3 Absolute maximum ratings.
Supply voltage (VS):
Positive supply voltage:
Device types 01, 03, and 04 ............................................................. +40 V dc
Device type 02 .................................................................................. +50 V dc
Negative supply voltage:
Device types 01, 03, and 04 ............................................................. -40 V dc
Device type 02 .................................................................................. -50 V dc
Differential input voltage:
Device types 01, 03, and 04 ................................................................. 80 V dc
Device type 02 ..................................................................................... 100 V dc
Internal power dissipation ........................................................................ 680 mW 1/ 2/
Input voltage ............................................................................................ ±40 V dc 3/
Output short circuit duration ..................................................................... 5 seconds
Storage temperature range ...................................................................... -65°C to +150°C
Lead temperature (soldering, 10 seconds) .............................................. +300°C
Junction resistance (TJ) ........................................................................... +175°C
Thermal resistance, junction-to-case (θJC) .............................................. See MIL-STD-1835
______
1/ Derate above +75°C, cases G and X are at 9.3 mW/°C, case P at 8.0 mW/°C, and case 2 at 11.4 mW/°C.
2/ Must withstand the added PD due to short circuit test, e.g., IOS.
3/ For supply voltage less than ±40 V, the absolute maximum input voltage is equal to the supply voltage.
www.DataSheeSt4TUAN.cDoAmRD
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
K
78003
SHEET
2









No Preview Available !

78004xx Даташит, Описание, Даташиты
www.DataSheet4U.com
1.4 Recommended operating conditions.
Positive supply voltage:
Device types 01, 03, and 04 ................................................................. +40 V dc
Device type 02 ..................................................................................... +50 V dc
Negative supply voltage:
Device types 01, 03, and 04 ................................................................. -40 V dc
Device type 02 ..................................................................................... -50 V dc
Ambient operating temperature range (TA) .............................................. -55°C to +125°C
2. APPLICABLE DOCUMENTS
2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part
of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883 - Test Method Standard Microcircuits.
MIL-STD-1835 - Interface Standard Electronic Component Case Outlines.
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-103 - List of Standard Microcircuit Drawings.
MIL-HDBK-780 - Standard Microcircuit Drawings.
(Copies of these documents are available online at http://assist.daps.dla.mil/quicksearch/ or www.dodssp.daps.mil or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text
of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535, appendix A for non-
JAN class level B devices and as specified herein. Product built to this drawing that is produced by a Qualified Manufacturer
Listing (QML) certified and qualified manufacturer or a manufacturer who has been granted transitional certification to MIL-
PRF-38535 may be processed as QML product in accordance with the manufacturers approved program plan and qualifying
activity approval in accordance with MIL-PRF-38535. This QML flow as documented in the Quality Management (QM) plan
may make modifications to the requirements herein. These modifications shall not affect form, fit, or function of the device.
These modifications shall not affect the PIN as described herein. A "Q" or "QML" certification mark in accordance with MIL-
PRF-38535 is required to identify when the QML flow option is used.
www.DataSheeSt4TUAN.cDoAmRD
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
K
78003
SHEET
3










Скачать PDF:

[ 78004xx.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
78004xxOP-AMP / SINGLE / BIPOLARLinfinity Microelectronics
Linfinity Microelectronics

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск