DataSheet39.com

What is NC103?

This electronic component, produced by the manufacturer "Noise Com", performs the same function as "(NC100 Series) 0.1 HZ - 500 KHZ Noise Diode".


NC103 Datasheet PDF - Noise Com

Part Number NC103
Description (NC100 Series) 0.1 HZ - 500 KHZ Noise Diode
Manufacturers Noise Com 
Logo Noise Com Logo 


There is a preview and NC103 download ( pdf file ) link at the bottom of this page.





Total 2 Pages



Preview 1 page

No Preview Available ! NC103 datasheet, circuit

www.DataSheet4U.com
0.1 Hz to 110 GHz
30
NOISE
DIODES
Noise Com's noise diodes are the fundamental
building blocks of all noise systems. They are
hand-picked for performance characteristics that
make them ideally suited to broadband noise
generation with flat response.
All Noise Com noise diodes deliver symmetrical
white Gaussian noise and flat output power
versus frequency. The diodes are burned-in
for 168 hours, meet MIL-STD202, and are
hermetically sealed. Noise Com noise diodes
are available in a wide variety of package styles,
and in special configurations on request.
The NC100 and NC200 Series diodes are
designed for audio and RF applications. The
NC300 and NC400 Series diodes are designed
for microwave applications in which
a 50-ohm impedance is required.
Typical small signal impedance of the NC300
and NC400 Series is 10-20 ohms when a diode
is turned on. Typically the output
DataSheet4U.com
level is higher at low frequencies
with low currents. Driving the
diodes with more current results in more output
at higher frequencies.
DataShee
General Specifications:
Output
White Gaussian Noise
Operating
0˚C to +55˚C
temperature
for NC100 series
-55˚C to +125˚C
for all others
Storage temperature -65˚C to +150˚C
Specifications subject to change without notice.
DataSheet4U.com
DataSheet4 U .com
Applications:
Built-in test equipment (BITE)
Dither circuitry for A/D converters
+
15V
TYPICAL BIAS CIRCUIT
CATHODE
R
C
RF
For NC100 Series
R = 150K
For NC200 Series
R = 15K
RL For NC300/400 Series
R = Adjust for performance
C
1
2πRL(fc)
R L= Load resistor
For recommended value,
see charts on page 31
fc= low frequency cut-off
wDawtaSwhe.ent4oU.icsomecom.com


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for NC103 electronic component.


Information Total 2 Pages
Link URL [ Copy URL to Clipboard ]
Download [ NC103.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
NC101The function is Noise Diodes. Wireless TelecomWireless Telecom
NC101The function is (NC100 Series) 0.1 HZ - 500 KHZ Noise Diode. Noise ComNoise Com
NC102The function is Noise Diodes. Wireless TelecomWireless Telecom

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

NC10     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search