|
|
PDF HI9P-0201HS-5 Data sheet ( Hoja de datos )
| Número de pieza | HI9P-0201HS-5 | |
| Descripción | High Speed Quad SPST CMOS Analog Switch | |
| Fabricantes | Intersil | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HI9P-0201HS-5 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
®
Data Sheet
September 2004
HI-201HS
FN3123.4
High Speed, Quad SPST, CMOS Analog
Switch
The HI-201HS is a monolithic CMOS Analog Switch
featuring very fast switching speeds and low ON resistance.
The integrated circuit consists of four independently
selectable SPST switches and is pin compatible with the
industry standard HI-201 switch.
Fabricated using silicon-gate technology and the Intersil
Dielectric Isolation process, this TTL compatible device offers
improved performance over previously available CMOS analog
switches. Featuring maximum switching times of 50ns, low ON
resistance of 50Ω maximum, and a wide analog signal range, the
HI-201HS is designed for any application where improved
switching performance, particularly switching speed, is required.
(A more detailed discussion on the design and application of the
HI-201HS can be found in Application Note AN543.)
Ordering Information
Features
• Pb-free Available as an Option
• Fast Switching Times
- tON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30ns
- tOFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40ns
• Low “ON” Resistance . . . . . . . . . . . . . . . . . . . . . . . . 30Ω
• Pin Compatible with Standard HI-201
• Wide Analog Voltage Range (±15V Supplies) . . . . . . . ±15V
• Low Charge Injection (±15V Supplies) . . . . . . . . . . 10pC
• TTL Compatible
• Symmetrical Switching Analog Current Range . . . . . 80mA
Applications
• High Speed Multiplexing
• High Frequency Analog Switching
TEMP.
PART NUMBER RANGE (°C)
PACKAGE
HI1-0201HS-2
-55 to 125 16 Ld CERDIP
HI1-0201HS-4
-25 to 85 16 Ld CERDIP
HI1-0201HS-5
0 to 75 16 Ld CERDIP
HI3-0201HS-5
0 to 75 16 Ld PDIP
HI3-0201HS-5Z
(See Note)
0 to 75
16 Ld PDIP
(Pb-free)
PKG.
DWG. #
• Sample and Hold Circuits
• Digital Filters
F16.3
• Operational Amplifier Gain Switching Networks
F16.D3 ataSheet4U.com
• Integrator Reset Circuits
F16.3
E16.3
Pinout (Switches Shown For Logic “1” Input)
HI-201HS (CERDIP, PDIP, SOIC)
E16.3
TOP VIEW
DataShee
HI9P0201HS-5
0 to 75 16 Ld SOIC
M16.3
HI9P0201HS-5Z
(See Note)
0 to 75
16 Ld SOIC
(Pb-free)
M16.3
HI9P0201HS-9
-40 to 85 16 Ld SOIC
M16.3
HI9P0201HS-9Z
(See Note)
-40 to 85 16 Ld SOIC
(Pb-free)
M16.3
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which is compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020C.
A1 1
OUT1 2
IN1 3
V- 4
GND 5
IN4 6
OUT4 7
A4 8
16 A2
15 OUT2
14 IN2
13 V+
12 NC
11 IN3
10 OUT3
9 A3
DataSheet4U.com
DataSheet4 U .com
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2000, 2004. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
1 page  
www.DataSheet4U.com
HI-201HS
Electrical Specifications Supplies = +15V, -15V; VAH (Logic Level High) = 2.4V, VAL (Logic Level Low) = +0.8V, GND = 0V,
Unless Otherwise Specified (Continued)
PARAMETER
TEST
TEMP
CONDITIONS (oC)
MIN
-2
TYP MAX
-4, -5, -9
MIN TYP MAX
rON Match
OFF Input Leakage Current, IS(OFF)
25 - 3 - - 3 -
25 - 0.3 10 - 0.3 10
Full -
- 100 -
- 50
OFF Output Leakage Current, ID(OFF)
25 - 0.3 10 - 0.3 10
Full -
- 100 -
- 50
ON Leakage Current, ID(ON)
25 - 0.1 10 - 0.1 10
Full -
- 100 -
- 50
POWER SUPPLY CHARACTERISTICS (Note 7)
Power Dissipation, PD
25 - 120 -
- 120 -
Full -
- 240 -
- 240
Current, I+ (Pin 13)
25 - 4.5 -
- 4.5 -
Full -
- 10.0 -
- 10.0
Current, I- (Pin 4)
25 - 3.5 -
- 3.5 -
Full - - 6 - - 6
NOTES:
et4U.com
2. VOUT = ±10V, IOUT = 1mA.
3. RL = 1kΩ, CL = 35pF, VIN = +10V, VA = +3V. (See Figure 1).
4. VA = 3V, RL = 1kΩ, CL = 10pF, VIN = 3VRMS, f = 100kHz.
5. VA = 3V, RL = 1kΩ, VIN = 3VRMS, f = 100kHz.
DataSheet4U.com
6. CL = 1nF, VIN = 0V, Q = CL x ∆VO.
7. VA = 3V or VA = 0 for all switches.
UNITS
%
nA
nA
nA
nA
nA
nA
mW
mW
mA
mA
mA
mA
DataShee
Test Circuits and Waveforms
DIGITALVAH = 3.0V
INPUT
50%
VAL = 0V
SWITCH 0V
OUTPUT
tON
90%
50%
tOFF1
90%
tOFF2
10%
FIGURE 1A. MEASUREMENT POINTS
TOP: Logic Input (2V/Div.) BOTTOM: Output (5V/Div.)
HORIZONTAL: 100ns/Div.
FIGURE 1B. WAVEFORMS
DataSheet4U.com
DataSheet4 U .com
5
5 Page 
www.DataSheet4U.com
Die Characteristics
DIE DIMENSIONS
2440µm x 2860µm x 485µm
METALLIZATION
Type: CuAl
Thickness: 16kÅ ±2kÅ
Metallization Mask Layout
OUT1
A1
HI-201HS
PASSIVATION
Type: Nitride Over Silox
Nitride Thickness: 3.5kÅ ±1kÅ
Silox Thickness: 12kÅ ±2kÅ
WORST CASE CURRENT DENSITY
9.5 x 104 A/cm2
HI-201HS
A2
OUT2
et4U.com
IN1
V-
GND
IN4
DataSheet4U.com
IN2
V+
IN3
OUT4
A4
OUT3
A3
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reli-
able. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from
its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
DataSheet4U.com
For information regarding Intersil Corporation and its products, see web site www.intersil.com
11
DataSheet4 U .com
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet HI9P-0201HS-5.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HI9P-0201HS-5 | High Speed Quad SPST CMOS Analog Switch | Intersil |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |