DataSheet26.com

даташит OPB39x PDF ( Datasheet )

OPB39x Datasheet Download - Optek Technology

Номер произв OPB39x
Описание (OPBxxx) Slotted Optical Switches
Производители Optek Technology
логотип Optek Technology логотип 

1Page
		

No Preview Available !

OPB39x Даташит, Описание, Даташиты
www.DataSheet4U.com
Slotted Optical Switch
OPB355, OPB360, OPB370, OPB380, OPB390
OPB859, OPB860, OPB870, OPB880, OPB890
Series
Features:
0.125” (3.175 mm) slot width
Choice of aperture (0.050” or 0.010” width)
Choice of opaque or IR transmissive shell material
Choice of mounting configurations
Choice of lead spacing or wires
Product Photo Here
Description:
Each device in this series provides the flexibility of a custom device from a standard product line. Building from a
standard housing with a 0.125” (3.175 mm) wide slot, a user can choose aperture width, opaque or IR
transmissive housing shell material, PCBoard lead spacing or wires and mounting tab configuration.
Housings are made from an opaque grade of injection-molded plastic to minimize sensitivity to both visible and
near-infrared light. Discrete shells exposed on the parallel faces inside each device’s throat are made from either
IR transmissive plastic (for applications where dust protection is needed) or from opaque plastic with aperture
openings (for applications that require maximum protection against ambient light).
Phototransistor sensor devices include the OPB859, PB360, OPB370, OPB380, OPB390, OPB860 and OPB870,
while the OPB355 provides a photodiode sensor. The photodiode sensor has a lower and more linear output-
versus-light input than the phototransistor models.
The OPB355, OPB360, OPB370, OPB859, OPBD8a6ta0SahnedeOt4PUB.c8o7m0 are designed for direct connection to through
hole PCBoards. The OPB380, OPB390, OPB880 and OPB890 have 26 AWG wires connected directly to the
device for remote sensing applications.
DataShee
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
Non-contact object sensing
Assembly line automation
Machine automation
Equipment safety
Machine safety
OPB360, OPB370, OPB380, OPB390
OPB859
OPB860, OPB870, OPB880, OPB890
13
OPB355
13
24
24
RoHS
DataSheet4U.com
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking.
Vibra-Tite evaporates fast without causing structural failure in OPTEK’s molded plastics.
Applies to: OPB360, OPB370, OPB380, OPB390
and OPB860, OPB870, OPB880, OPB890.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 02/06
Page 1 of 10
DataSheet4 U .com







No Preview Available !

OPB39x Даташит, Описание, Даташиты
www.DataSheet4U.com
Slotted Optical Switch
OPB355, OPB360, OPB370, OPB380, OPB390
OPB859, OPB860, OPB870, OPB880, OPB890
Series
Optek Assembly
Part Number Guide — OPB355
OPB 3 X X X
Photodiode Output Family
Mounting Configurations:
N — No mounting tabs
L — Emitter side mounting tab only
P — Sensor side mounting tab only
T — Two mounting tabs
Optek Assembly
Phototransistor Output Family
et4U.com
Discrete Shell Material:
6 — Base mount IR transmissive
Polysulfone discrete shell
PCMountable leads
7 — Base mount opaque
Plastic discrete shell
PCMountable leads
Part Number Guide — OPB360 / OPB370
OPB 3 X X X X X
Sensor Aperture:
1 — 0.010” (2.54 mm)
5 — 0.050” (12.70 mm)
Emitter Aperture:
1 — 0.010” (2.54 mm)
5 — 0.050” (12.70 mm)
DataSheet4U.com
Mounting Configurations:
L — Emitter side mounting tab only
N — No mounting tabs
P — Sensor side mounting tab only
T — Two mounting tabs
Lead Spacer Designator:
0 = 0.320” (8.12 mm) lead space
5 = 0.220” (5.59 mm) lead space
DataShee
Part Number Guide — OPB380 / OPB390
OPB 3 X X X X X
Optek Assembly
Sensor Aperture:
1 — 0.010” (2.54 mm)
5 — 0.050” (12.70 mm)
Phototransistor Output Family
Emitter Aperture:
1 — 0.010” (2.54 mm)
5 — 0.050” (12.70 mm)
Discrete Shell Material:
8 — Base mount IR transmissive
Polysulfone discrete shell
PCMountable leads
9 — Base mount opaque
Plastic discrete shell
PCMountable leads
Mounting Configurations:
L — Emitter side mounting tab only
N — No mounting tabs
P — Sensor side mounting tab only
T — Two mounting tabs
Wire Designator:
26 AWG
24” Long
DataSheet4U.com
Issue A 02/06
Page 2 of 10
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
DataSheet4 U .com







No Preview Available !

OPB39x Даташит, Описание, Даташиты
www.DataSheet4U.com
Slotted Optical Switch
OPB355, OPB360, OPB370, OPB380, OPB390
OPB859, OPB860, OPB870, OPB880, OPB890
Series
Optek Assembly
Part Number Guide — OPB859
OPB 8 X X
Photodiode Output Family
Emitter Aperture: 0.050” (12.70 mm)
Sensor Aperture: 0.050” (12.70 mm)
Mounting Configuration:
T — Two mounting tabs
Optek Assembly
Phototransistor Output Family
et4U.com
Discrete Shell Material:
6 — Base mount IR transmissive
Plastic discrete shell
PCMountable leads
7 — Base mount opaque
Plastic discrete shell
PCMountable leads
Part Number Guide — OPB860 / OPB870
OPB 8 X X X X X
Sensor Aperture:
1 — 0.010” (2.54 mm)
5 — 0.050” (12.70 mm)
Emitter Aperture:
1 — 0.010” (2.54 mm)
5 — 0.050” (12.70 mm)
Electrical Specification Variations:
0 = Electrical Parameter A (lead spacing = 0.320”)
1 = Electrical Parameter B (lead spacing = 0.320”)
2
5
=
=
EElleeccttrriiccaallDPPaaarrtaaammSeehtteeerreCAt4((llUeeaa.dcdosspmpaacciinngg
=
=
0.320”)
0.220”)
6 = Electrical Parameter B (lead spacing = 0.220”)
7 = Electrical Parameter C (lead spacing = 0.220”)
Mounting Configurations:
N — No mounting tabs
L — Emitter side mounting tab only
T — Two mounting tabs
P — Phototransistor side mounting side
Note: Assemblies with dual 0.010” apertures are
currently available with electrical parameter
“A” only.
DataShee
Part Number Guide — OPB880 / OPB890
OPB 8 X X X X X
Optek Assembly
Sensor Aperture:
1 — 0.010” (2.54 mm)
5 — 0.050” (12.70 mm)
Phototransistor Output Family
Emitter Aperture:
1 — 0.010” (2.54 mm)
5 — 0.050” (12.70 mm)
Discrete Shell Material:
8 — Base mount IR transmissive
Plastic discrete shell
PCMountable leads
9 — Base mount opaque
Plastic discrete shell
PCMountable leads
Electrical Specification Variations:
0 = Electrical Parameter A
1 = Electrical Parameter B
2 = Electrical Parameter C
Mounting configurations:
N — No mounting tabs
L — Emitter side mounting tab only
T — Two mounting tabs
P — Phototransistor side mounting side
Note: Assemblies with dual 0.010” apertures are
currently available with electrical parameter
“A” only.
Wires = 26AWG—24” Long
DataSheet4U.com
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 02/06
Page 3 of 10
DataSheet4 U .com










Всего страниц 10 Pages
Скачать PDF[ OPB39x.PDF Даташит ]

Ссылка Поделиться


Related Datasheets

Номер в каталогеОписаниеПроизводители
OPB39x(OPBxxx) Slotted Optical SwitchesOptek Technology
Optek Technology

Номер в каталоге Описание Производители
6MBP200RA-060

Intelligent Power Module

Fuji Electric
Fuji Electric
ADF41020

18 GHz Microwave PLL Synthesizer

Analog Devices
Analog Devices
AN-SY6280

Low Loss Power Distribution Switch

Silergy
Silergy

DataSheet26.com    |    2018    |   Контакты    |    Поиск