|
|
PDF HA1-5330-2 Data sheet ( Hoja de datos )
| Número de pieza | HA1-5330-2 | |
| Descripción | 650ns Precision Sample and Hold Amplifier | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HA1-5330-2 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Data Sheet
HA-5330
September 1998
File Number 2858.3
650ns Precision Sample and Hold
Amplifier
The HA-5330 is a very fast sample and hold amplifier
designed primarily for use with high speed A/D converters. It
utilizes the Intersil Dielectric Isolation process to achieve a
650ns acquisition time to 12-bit accuracy and a droop rate of
0.01µV/µs. The circuit consists of an input transconductance
amplifier capable of producing large amounts of charging
current, a low leakage analog switch, and an integrating
output stage which includes a 90pF hold capacitor.
The analog switch operates into a virtual ground, so charge
injection on the hold capacitor is constant and independent
of VIN. Charge injection is held to a low value by
compensation circuits and, if necessary, the resulting 0.5mV
hold step error can be adjusted to zero via the Offset Adjust
terminals. Compensation is also used to minimize leakage
currents which cause voltage droop in the Hold mode.
The HA-5330 will operate at reduced supply voltages (to
±10V) with a reduced signal range. The MIL-STD-883 data
sheet for this device is available on request.
Ordering Information
PART NUMBER
HA1-5330-2
TEMP.
RANGE (oC)
PACKAGE
-55 to 125 14 Ld CERDIP
HA1-5330-5
HA3-5330-5
0 to 75
0 to 75
14 Ld CERDIP
14 Ld PDIP
PKG.
NO.
F14.3
F14.3
E14.3
Pinout
HA-5330
(PDIP, CERDIP)
TOP VIEW
+IN 1
NC 2
OFFSET ADJ. 3
OFFSET ADJ. 4
V- 5
NC 6
OUTPUT 7
14 -IN
13 NC
12 SIGNAL GND
11 SUPPLY GND
10 V+
9 NC
8 S/H CONTROL
Features
• Very Fast Acquisition . . . . . . 500ns (0.1%) 650ns (0.01%)
• Low Droop Rate . . . . . . . . . . . . . . . . . . . . . . . . 0.01µV/µs
• Very Low Offset . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.2mV
• High Slew Rate. . . . . . . . . . . . . . . . . . . . . . . . . . . . 90V/µs
• Wide Supply Range . . . . . . . . . . . . . . . . . . . . . ±10V to ±20V
• Internal Hold Capacitor
• Fully Differential Input
• TTL/CMOS Compatible
Applications
• Precision Data Acquisition Systems
• D/A Converter Deglitching
• Auto-Zero Circuits
• Peak Detectors
Functional Diagram
OFFSET
ADJUST
V+
34
10
HA-5330
90pF
14
- IN
1
+IN
S/H 8
CONTROL
7 OUT
11
SUPPLY
GND
5 12
V- SIGNAL
GND
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1 page  
Die Characteristics
DIE DIMENSIONS:
99 mils x 166 mils x 19 mils
2510µm x 4210µm x 483µm
METALLIZATION:
Type: Al, 1% Cu
Thickness: 16kÅ ±2kÅ
Metallization Mask Layout
+IN
OFFSET ADJ
OFFSET ADJ
V-
HA-5330
PASSIVATION:
Type: Nitride (Si3N4) over Silox (SiO2, 5% Phos.)
Silox Thickness: 12kÅ ±2kÅ
Nitride Thickness: 3.5kÅ ±1.5kÅ
SUBSTRATE POTENTIAL (Powered Up):
Signal GND
TRANSISTOR COUNT:
205
PROCESS:
Bipolar Dielectric Isolation
HA-5330
-IN
SIGNAL GND
SUPPLY GND
V+
OUTPUT
S/H CONTROL
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time with-
out notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet HA1-5330-2.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HA1-5330-2 | 650ns Precision Sample and Hold Amplifier | Intersil Corporation |
| HA1-5330-5 | 650ns Precision Sample and Hold Amplifier | Intersil Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |