|
|
PDF HFCT-5760 Data sheet ( Hoja de datos )
| Número de pieza | HFCT-5760 | |
| Descripción | Single Mode OC-3/STM-1 Small Form Factor Pluggable Transceivers | |
| Fabricantes | Hewlett-Packard | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HFCT-5760 (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Agilent HFCT-5760TL/TP/NL/NP/ATL/
ATP/ANL/ANP Single Mode OC-3/
STM-1 Small Form Factor Pluggable
Transceivers
Part of the Agilent METRAK family
Data Sheet
Description
The HFCT-5760xxx Small Form
Factor Pluggable LC optical
transceivers are high
performance, cost effective
modules for serial data
transmission at a signal rate of
155 Mbit/s. The transceivers are
compliant with SONET/SDH and
the Small Form Factor Pluggable
(SFP) Multi-Source Agreement
(MSA) specifications. They are
designed for intermediate and
long reach applications at 155
Mbit/s.
The transceivers operate at a
nominal wavelength of 1300 nm
over single mode fiber. The
transmitter section incorporates
a highly reliable Fabry Perot
(FP) laser and uses an MOVPE
grown planar PIN photodetector
for low dark current and
excellent responsivity on the
receiver section.
Features
• Compliant with ITU-T G.957 STM-
1 S1.1 (15 km) and L1.1 (40 km)
Optical Interface
• Compliant with Telcordia GR253
OC3 IR-1 (15 km) and LR-1 (40
km) Optical Interface
• Multi-Source Agreement (MSA)
compliant SFP package
• Hot-pluggable
• Multirate operation from
125 Mb/s to 155 Mb/s
• Operating case temperature
ranges:
-40 to +85 °C (ATL/ATL/ANL/ANP)
-10 to +85 °C (TL/TP/NL/NP)
• Optional extended de-latch for
high density applications
- standard de-latch
- bail de-latch
• Manufactured in an ISO 9001
“compliant facility”
• Single +3.3 V power supply
• Class 1 CDRH/IEC 825 eye safety
compliant
• LC Duplex fiber connector
Applications
OC-3 SFP transceivers are designed
for ATM LAN and WAN applications
such as:
• ATM switches and routers
• SONET/SDH switch infrastructure
• xDSL applications
• Metro edge switching
• Suitable for Fast Ethernet
applications
Related Products
• HFCT-596xx LC SFF PTH
transceivers
• HDMP-3001 Ethernet Over
SONET/SDH Mapper
DataSheet4 U .com
1 page  
www.DataSheet4U.com
Serial Identification (EEPROM)
identification protocol. This
The HFCT-5760TL/TP is
protocol uses the 2-wire serial
compliant with the SFP MSA,
CMOS E2PROM protocol of the
which defines the serial
ATMEL AT24C01A or similar.
Table 2. EEPROM Serial ID Memory Contents
MSA compliant, example
contents of the HFCT-5760TL/
TP serial ID memory are defined
in Table 2.
Addr Hex
ASCII Addr Hex
ASCII Addr Hex
ASCII Addr Hex
ASCII
0 03
40 48
H 68 Note 1
96 Note 4
1 04
41 46
F 69 Note 1
97 Note 4
2 07
42 43
C 70 Note 1
98 Note 4
3 00
43 54
T 71 Note 1
99 Note 4
4 00
44 2D
- 72 Note 1
100 Note 4
5 02
45 35
5 73 Note 1
101 Note 4
6 00
46 37
7 74 Note 1
102 Note 4
7 00
47 36
6 75 Note 1
103 Note 4
8 00
48 30
0 76 Note 1
104 Note 4
9 00
49 54
T 77 Note 1
105 Note 4
10 00
50 20
78 Note 1
106 Note 4
11 03
51 20
79 Note 1
107 Note 4
12 02
52 20
80 Note 1
108 Note 4
13 00
53 20
81 Note 1
109 Note 4
14 0F
54 20
82 Note 1
110 Note 4
15 96
55 20
83 Note 1
111 Note 4
16 00
56 20
84 Note 2
112 Note 4
17 00
57 20
85 Note 2
113 Note 4
18 00
58 20
86 Note 2
114 Note 4
19 00
59 20
87 Note 2
115 Note 4
20 41
A 60 00
88 Note 2
116 Note 4
21 47
G 61 00
89 Note 2
117 Note 4
22 49
I 62 00
90 Note 2
118 Note 4
23 4C
L 63 99, Note 3
91 Note 2
119 Note 4
24 45
E 64 00
92 00
120 Note 4
25 4E
N 65 1A
93 00
121 Note 4
26 54
T 66 00
94 00
122 Note 4
27 20
67 00
95 Note 3
123 Note 4
28 20
124 Note 4
29 20
125 Note 4
30 20
126 Note 4
31 20
127 Note 4
32 20
33 20
34 20
35 20
36 00
37 00
38 30
39 D3
Notes:
1. Address 68-83 specify a unique identifier.
2. Address 84-91 specify the date code.
3. Addresses 63 and 95 are check sums. Address 63 is the check sum for bytes 0-62 and address 95 is the check sum for bytes 64-94.
5 4. Address 96-127 is vendor specific data.
DataSheet4 U .com
5 Page 
www.DataSheet4U.com
Mechanical Dimensions
Figure 6. Drawing of SFP Transceiver
11
DataSheet4 U .com
Notes:
1. Cage grounding springs permitted in this
area and may extend full length of
transceiver, 4 places. Grounding springs
may contribute a maximum force of 3.5 N
(Newtons) to the withdrawal force of the
transceiver from the cage.
2. A representative LC connector configuration
is illustrated. Indicated outline defines the
preferred maximum envelope outside of the
cage.
3. Design of actuation method and shape is
optional.
4. Color code: An exposed colored feature of
the transceiver (a feature or surface
extending outside the cage assembly) shall
be color coded as follows:
• Black or beige for multimode
• Blue for single mode
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet HFCT-5760.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HFCT-5760 | Single Mode OC-3/STM-1 Small Form Factor Pluggable Transceivers | Hewlett-Packard |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |