|
|
PDF NC41120-0015 Data sheet ( Hoja de datos )
| Número de pieza | NC41120-0015 | |
| Descripción | Resistive Touch Panel Specification | |
| Fabricantes | Fujitsu Media Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NC41120-0015 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
STANDARD
Resistive Touch Panel Specification
FID-550 7-Wire Series
Input Panel
Panel Drive
change over
switch
Noise Filter
MCU
Control
Section
A/D
converter
Interface
s FEATURES
• Superior long life, using a unique construction method offering improved life over typical
technologies; by sensing data input only on the glass layer, typically a 10x improvement in
product life is achived.
• Excellent specification and high quality
- Anti-Newton ring technology
- High reliability materials
• Pen/Finger, Pen Only, Finger Only,
Light Touch types available
• Transparency 80% - typical
s PART NUMBERS
Touch Panels:
s PART NUMBERS
Controller Boards:
Part Number Size
Type
Part Number
Type
N010-0510-T302 17"
Pen/Finger
N16B-0558-B240 7-Wire, RS232
N010-0510-T211 15"
Pen/Finger
N16B-0558-B720 7-Wire, USB
N010-0550-T913 13.3"
Pen/Finger
N010-0550-T711 12.1"
Pen/Finger
N010-0551-T242 12.1" Pen/Finger (light touch type)
N010-0550-T811 11.3
Pen/Finger
N010-0550-T601 10.4"
Pen only
N010-0550-T611 10.4"
Pen/Finger
s PART NUMBERS
Interface Controller Chips:
Part Number
Type
N010-0559-V022 7-Wire, RS232
NC41120-0015
7-Wire, USB
N010-0550-T621 10.4" Pen/Finger (light touch type)
N010-0550-T511 9.5"
Pen/Finger
N010-0550-T341 8.4"
Pen/Finger
1 page  
FID-550 SERIES
s 7.0 REJECT CRITERIA
Description
Reject Criteria
Film Dent
Area ≥ 0.1mm2
Area ≥ 0.05mm2 & area < 0.1mm2
Area < 0.05mm2
: to be zero
: to be max. 5 points
: none specified
Foreign
material
between
glass and film
Dot type
Line type
Area > 0.1mm2
Area ≥ 0.05mm2 & area < 0.1mm2
Area < 0.05mm2
Area ≥ 0.1mm
Area ≥ 0.03mm & width <0.1mm and length < 10mm
Area < 0.05mm
: to be zero
: to be max. 5 points
: none specified
: to be zero
: to be max. 1 point
: none specified
Scratch
Area ≥ 0.1mm
: to be zero
Area ≥ 0.03mm & width <0.1mm with length < 80mm : to be max. 1 point
Area < 0.03mm & width <0.1mm with length < 30mm : none specified
Dot blur or hard coat
missing
Area ≥ 0.5mm2
Area ≥ 0.03mm2 & area < 0.5mm2
Area < 0.05mm2
: to be zero
: to be max. 5 points
: none specified
Newton Ring
These must not be seen from Panel film side under a fluorescent lamp (3
wavelength type lamp). Not to be verified form glass side.
Glass flaw
To be no flaw which is bigger than that shown in the following diagram. The
number of flaws is not specified.
3mm
2mm
5mm
2mm
s 8.0 GENERAL POINTS OF CAUTION
Touch panels are made of glass, so care must be taken in handling them. Do not stress, pile, bend, lift by the
cable or put any stress on the film, for example moving by film face vacuum. In order to clean wring dry a
cloth which has been emersed in a natural detergent. DO NOT use any organic solvent, acid or alkali solu-
tion. Watch the edge of the panel when cleaning, again for safety reasons.
5
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet NC41120-0015.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NC41120-0015 | Resistive Touch Panel Specification | Fujitsu Media Devices |
| NC41120-0017 | USB Interface Controller Chip | Fujitsu Media Devices |
| NC41120-0018 | STANDARD Micro Controller Specification USB Interface Controller Chip | Fujitsu Media Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |