HFCT-5905E Datasheet PDF - Hewlett-Packard
| Part Number | HFCT-5905E | |
| Description | Agilent HFCT-5905E MT-RJ Duplex Single Mode Transceiver | |
| Manufacturers | Hewlett-Packard | |
| Logo |  |
|
|
There is a preview and HFCT-5905E download ( pdf file ) link at the bottom of this page. Total 12 Pages | ||
Preview 1 page No Preview Available !
www.DataSheet4U.com
Agilent HFCT-5905E MT-RJ Duplex
Single Mode Transceiver
Data Sheet
Description
The HFCT-5905E transceiver is a
high performance, cost effective
module for serial optical data
communications applications
specified for a signal rate of
155 MBd. It is designed to provide
a SONET/SDH compliant link for
155 Mb/s intermediate reach links.
The HFCT-5905 does not include a
nose shield and is not
recommended due to the potential
degradation of EMI performance in
a complete system. The HFCT-5905
is available on the rare occasion
that a system mechanical design
may not allow for a nose shield.
This module is designed for single
mode fiber and operates at a
nominal wavelength of 1300 nm.
It incorporates Agilent’s high
performance, reliable, long
wavelength optical devices and
proven circuit technology to give
long life and consistent service.
The transmitter section uses an
advanced SMQW Fabry Perot
laser with full IEC 825 and CDRH
Class I eye safety.
The receiver section uses a
MOVPE grown planar PIN
photodetector for low dark
current and excellent
responsivity.
A pseudo-ECL logic interface
simplifies interface to external
circuitry.
Features
• MT-RJ duplex single mode
transceiver
• Intermediate SONET OC3 SDH
STM1 (S1.1) compliant
• Single +3.3 V power supply
• Multisourced 2 x 5 pin
configuration
• Interchangeable with LED
multisourced 2 x 5 transceivers
• Unconditionally eye safe
laser IEC 825/CDRH Class 1
compliant
• Temperature range:
0°C to +70°C
Applications
• SONET/SDH equipment
interconnect
• ATM 155 Mb/s links
|
| |
 
Interface and Termination
Recommendations
Figure 3 shows a +3.3 V coupling
scheme. Also present are power
supply filtering arrangements
which comply with the
recommendations of the small
form factor multisource
agreement. Such a compliance
ensures noise rejection
compatibility between
transceivers from various
vendors.
TERMINATE AT
TRANSCEIVER INPUTS
100 W
WZ = 50
WZ = 50
10 9 8 7 6
fffff
1 µH VCC (+3.3 V)
TX C2 C3 10 µF
RX
1 µH
fffff
12345
C1
WZ = 50
WZ = 50
130 W 130 W
WZ = 50
Note: C1 = C2 = C3 = 10 nF or 100 nF
Figure 3. +3.3 V Transceiver Interface with +3.3 V LVPECL Device
5
PHY DEVICE
VCC (+3.3 V)
TD-
130 W 130 W
TD+
LVPECL
VCC (+3.3 V)
100 W
VCC (+3.3 V)
130 W
82 W
RD+
RD-
SD
LVPECL
TERMINATE AT
DEVICE INPUTS
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for HFCT-5905E electronic component. |
| Information | Total 12 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ HFCT-5905E.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| HFCT-5905E | The function is Agilent HFCT-5905E MT-RJ Duplex Single Mode Transceiver. Hewlett-Packard | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
HFCT
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||