DataSheet26.com

HLMP-1250 PDF даташит

Спецификация HLMP-1250 изготовлена ​​​​«Hewlett-Packard» и имеет функцию, называемую «(HLMP-1x50) Low Profile T-1 (3 mm) LED Lamps».

Детали детали

Номер произв HLMP-1250
Описание (HLMP-1x50) Low Profile T-1 (3 mm) LED Lamps
Производители Hewlett-Packard
логотип Hewlett-Packard логотип 

11 Pages
scroll

No Preview Available !

HLMP-1250 Даташит, Описание, Даташиты
www.DataSheet4U.com
Low Profile T-1 (3 mm)
LED Lamps
Technical Data
HLMP-1350
HLMP-1450
HLMP-1550
Features
• Low Profile Height
• Small T-1 Size Diameter
3.18 mm (0.125 inch)
• High Intensity
• IC Compatible
• Choice of 3 Bright Colors
High Efficiency Red
Yellow
High Performance Green
Description
This family of diffused solid state
lamps is especially suited for
applications where small package
size is required without
sacrificing luminous intensity.
The HLMP-1350 is a red tinted
lamp providing a wide viewing
angle. The HLMP-1450 and
HLMP-1550 are similar products
in yellow and green respectively.
Package Dimensions
Selection Guide
Part Number
HLMP-1350
HLMP-1350-C00xx
HLMP-1450
HLMP-1450-B00xx
HLMP-1550
HLMP-1550-A00xx
HLMP-1550-BC0xx
Luminous Intensity Iv (mcd)
Min.
Typ.
Max.
1.3 2.3
1.3 2.3
1.4 2.2
1.4 2.2
1.0 3.1
1.0 3.1
1.6 2.8 5.2
Test
Condition
(mA)
10.0
10.0
10.0
10.0
20.0
20.0
20.0
Typical Viewing
Angle[1] (Degrees), Dominant
2Θ1/2
Wavelength[2]
55 626
55 626
55 585
55 585
55 569
55 569
55 569
Notes:
1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial intensity.
2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.









No Preview Available !

HLMP-1250 Даташит, Описание, Даташиты
2
Part Numbering System
HLMP - x x xx - x x x xx
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Viewing Angle
50: 55 degrees
Color Options
3: GaP HER
4: GaP Yellow
5: GaP Green
Package Options
1: T-1 (3 mm)
Absolute Maximum Ratings
Parameter
Peak Forward Current
Average Forward Current
DC Current
Reverse Voltage
Transient Forward Current (10 µsec Pulse)
LED Junction Temperature
Operating Temperature Range
Storage Temperature Range
Lead Soldering Temperature
[1.6 mm (0.063 in.) from body]
HER
90
25
30
5
500
110
-55 to +100
Yellow
Green
60 90
20 25
20 30
55
500 500
110 110
-55 to +100
-20 to +100
-55 to +100
260°C for
5 Seconds
Units
mA
mA
mA
V
µA
°C
°C
Notes:
1. See Figure 5 (HER/Orange), 10 (Yellow), or 15 (Green/Emerald Green) to establish pulsed operating conditions.
2. For Red, Orange, and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at
0.2 mA/°C.
3. For Red, Orange, and Green series derate power linearly from 25°C at 1.8 mW/°C. For Yellow series derate power linearly from
50°C at 1.6 mW/°C.
4. The transient peak current is the maximum nonrecurring peak current that can be applied to the device without damaging the LED
die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the
Absolute Maximum Ratings.









No Preview Available !

HLMP-1250 Даташит, Описание, Даташиты
3
Electrical Characteristics at TA = 25°C
Symbol
Description
Device
HLMP
2θ1/2
Included Angle Between Half
Intensity Points
1350
1450
1550
λpeak
Peak Wavelength
1350
1450
1550
λd Dominant Wavelength
1350
1450
1550
∆λ1/2
Spectral Line Halfwidth
1350
1450
1550
τs Speed of Response
1350
1450
1550
C Capacitance
1350
1450
1550
RθJ-PIN Thermal Resistance
1350
1450
1550
VF Forward Voltage
1350
1450
1550
VR Reverse Breakdown Voltage 1350
1450
1550
ηv Luminous Efficacy
1350
1450
1550
Min.
1.6
1.6
1.6
5.0
5.0
5.0
Typ.
55
55
55
635
583
565
626
585
569
40
36
28
90
90
500
11
15
18
290
Max.
Units
Deg.
nm
nm
nm
ns
pF
°C/W
1.9 3.0
2.0 3.0
2.1 3.0
V
V
Test
Conditions
Note 1
Note 2
VF = 0
f = 1 MHz
Junction to
Cathode
Lead
IF = 10 mA
IR = 100 µA
145 lumens/ Note 3
500 Watt
595
Notes:
1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
3. Radiant intensity, Ie, in watts/steradian, may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas
and ηv is the luminous efficacy in lumens/watt.










Скачать PDF:

[ HLMP-1250.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
HLMP-1250(HLMP-1x50) Low Profile T-1 (3 mm) LED LampsHewlett-Packard
Hewlett-Packard

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск