DataSheet26.com

S71NS256N PDF даташит

Спецификация S71NS256N изготовлена ​​​​«SPANSION» и имеет функцию, называемую «Burst-mode Multiplexed Flash Memory».

Детали детали

Номер произв S71NS256N
Описание Burst-mode Multiplexed Flash Memory
Производители SPANSION
логотип SPANSION логотип 

12 Pages
scroll

No Preview Available !

S71NS256N Даташит, Описание, Даташиты
www.DataSheet4U.com
S71NS-N MCP Products
MirrorBitTM 1.8 Volt-only Simultaneous Read/Write,
Burst-mode Multiplexed Flash Memory:
256 Mb (16 Mb x 16-bit), 128 Mb (8 Mb x 16-bit) and
64 Mb (4 Mb x 16-bit) with Burst-mode Multiplexed
pSRAM: 64 Mb (4 Mb x 16-bit), 32 Mb (2 Mb x 16-bit)
and 16 Mb (1 Mb x 16-bit)
Data Sheet
ADVANCE
INFORMATION
Notice to Readers: The Advance Information status indicates that this
document contains information on one or more products under development
at Spansion Inc. The information is intended to help you evaluate this product.
Do not design in this product without contacting the factory. Spansion Inc.
reserves the right to change or discontinue work on this proposed product
without notice.
Publication Number S71NS-N_00 Revision A Amendment 3 Issue Date October 10, 2006









No Preview Available !

S71NS256N Даташит, Описание, Даташиты
Advance Information
Notice On Data Sheet Designations
Spansion Inc. issues data sheets with Advance Information or Preliminary designations to advise
readers of product information or intended specifications throughout the product life cycle, in-
cluding development, qualification, initial production, and full production. In all cases, however,
readers are encouraged to verify that they have the latest information before finalizing their de-
sign. The following descriptions of Spansion data sheet designations are presented here to high-
light their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion Inc. is developing one or more
specific products, but has not committed any design to production. Information presented in a
document with this designation is likely to change, and in some cases, development on the prod-
uct may discontinue. Spansion Inc. therefore places the following conditions upon Advance Infor-
mation content:
“This document contains information on one or more products under development at Spansion Inc. The
information is intended to help you evaluate this product. Do not design in this product without con-
tacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed
product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a
commitment to production has taken place. This designation covers several aspects of the prod-
uct life cycle, including product qualification, initial production, and the subsequent phases in the
manufacturing process that occur before full production is achieved. Changes to the technical
specifications presented in a Preliminary document should be expected while keeping these as-
pects of production under consideration. Spansion places the following conditions upon Prelimi-
nary content:
“This document states the current technical specifications regarding the Spansion product(s) described
herein. The Preliminary status of this document indicates that product qualification has been completed,
and that initial production has begun. Due to the phases of the manufacturing process that require
maintaining efficiency and quality, this document may be revised by subsequent versions or modifica-
tions due to changes in technical specifications.”
Combination
Some data sheets will contain a combination of products with different designations (Advance In-
formation, Preliminary, or Full Production). This type of document will distinguish these products
and their designations wherever necessary, typically on the first page, the ordering information
page, and pages with DC Characteristics table and AC Erase and Program table (in the table
notes). The disclaimer on the first page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal
changes are expected, the Preliminary designation is removed from the data sheet. Nominal
changes may include those affecting the number of ordering part numbers available, such as the
addition or deletion of a speed option, temperature range, package type, or VIO range. Changes
may also include those needed to clarify a description or to correct a typographical error or incor-
rect specification. Spansion Inc. applies the following conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s) described
herein. Spansion Inc. deems the products to have been in sufficient production volume such that sub-
sequent versions of this document are not expected to change. However, typographical or specification
corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local AMD or Fujitsu
sales office.
ii S71NS-N_00_A3 October 10, 2006









No Preview Available !

S71NS256N Даташит, Описание, Даташиты
S71NS-N MCP Products
MirrorBitTM 1.8 Volt-only Simultaneous Read/Write,
Burst-mode Multiplexed Flash Memory:
256 Mb (16 Mb x 16-bit), 128 Mb (8 Mb x 16-bit) and
64 Mb (4 Mb x 16-bit) with Burst-mode Multiplexed
pSRAM: 64 Mb (4 Mb x 16-bit), 32 Mb (2 Mb x 16-bit)
and 16 Mb (1 Mb x 16-bit)
ADVANCE
INFORMATION
General Description
The S71NS-N Series is a product line of stacked Multi-Chip Product (MCP) packages and consists
of the following items:
„ One or more S29NS-N flash memory die
„ Mux burst-mode pSRAM
The products covered by this document are listed in the table below. For details about their spec-
ifications, please refer to their individual datasheet for further details.
Flash
Density
64 Mb
128 Mb
256 Mb
16 Mb
S71NS064NA0
S71NS128NA0
pSRAM
32 Mb
S71NS128NB0
S71NS256NB0
64 Mb
S71NS128NC0
S71NS256NC0
Distinctive Characteristics
MCP Features
„ Power supply voltage of 1.7 V to 1.95 V
„ Burst Speed: 66 MHz
„ Package - MCP BGA: 0.5 mm ball pitch
— 8.0 x 9.2 mm, 56 ball for NS064N and NS128N based MCPs
— 10.0 x 11.0 mm, 60 ball for NS256N based MCPs
„ Operating Temperature
— Wireless, –25°C to +85°C
For detailed specifications, please refer to the individual data sheets:
Document
S29NS-N
16 M Multiplexed pSRAM Type 2
16 M Multiplexed pSRAM Type 3
32 M Multiplexed pSRAM Type 3
64 M Multiplexed pSRAM Type 3
Publication Identification Number
S29NS-N_00
muxpsram_05
muxpsram_03
muxpsram_04
muxpsram_01
Publication Number S71NS-N_00 Revision A Amendment 3 Issue Date October 10, 2006










Скачать PDF:

[ S71NS256N.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
S71NS256NBurst-mode Multiplexed Flash MemorySPANSION
SPANSION

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск