DataSheet26.com

S71WS-NX0 PDF даташит

Спецификация S71WS-NX0 изготовлена ​​​​«SPANSION» и имеет функцию, называемую «Stacked Multi-Chip Product (MCP)».

Детали детали

Номер произв S71WS-NX0
Описание Stacked Multi-Chip Product (MCP)
Производители SPANSION
логотип SPANSION логотип 

30 Pages
scroll

No Preview Available !

S71WS-NX0 Даташит, Описание, Даташиты
www.DataSheet4U.com
S71WS-Nx0 Based MCPs
Stacked Multi-Chip Product (MCP)
128/256/512 Megabit (32M/16M x 16 bit) CMOS
1.8 Volt-only Simultaneous Read/Write,
Burst-mode Flash Memory with
pSRAM Type 4
Data Sheet
ADVANCE
INFORMATION
Notice to Readers: This document states the current technical specifications
regarding the Spansion product(s) described herein. Each product described
herein may be designated as Advance Information, Preliminary, or Full
Production. See Notice On Data Sheet Designations for definitions.
Publication Number S71WS-N_01 Revision A Amendment 4 Issue Date September 15, 2005
This document contains information on one or more products under development at Spansion LLC. The information is intended to help you evaluate this product. Do not
design in this product without contacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed product without notice.









No Preview Available !

S71WS-NX0 Даташит, Описание, Даташиты
Advance Information
Notice On Data Sheet Designations
Spansion LLC issues data sheets with Advance Information or Preliminary designations to advise
readers of product information or intended specifications throughout the product life cycle, includ-
ing development, qualification, initial production, and full production. In all cases, however,
readers are encouraged to verify that they have the latest information before finalizing their de-
sign. The following descriptions of Spansion data sheet designations are presented here to
highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion LLC is developing one or more spe-
cific products, but has not committed any design to production. Information presented in a
document with this designation is likely to change, and in some cases, development on the prod-
uct may discontinue. Spansion LLC therefore places the following conditions upon Advance
Information content:
“This document contains information on one or more products under development at Spansion LLC. The
information is intended to help you evaluate this product. Do not design in this product without con-
tacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed
product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a
commitment to production has taken place. This designation covers several aspects of the product
life cycle, including product qualification, initial production, and the subsequent phases in the
manufacturing process that occur before full production is achieved. Changes to the technical
specifications presented in a Preliminary document should be expected while keeping these as-
pects of production under consideration. Spansion places the following conditions upon
Preliminary content:
“This document states the current technical specifications regarding the Spansion product(s) described
herein. The Preliminary status of this document indicates that product qualification has been completed,
and that initial production has begun. Due to the phases of the manufacturing process that require
maintaining efficiency and quality, this document may be revised by subsequent versions or modifica-
tions due to changes in technical specifications.”
Combination
Some data sheets will contain a combination of products with different designations (Advance In-
formation, Preliminary, or Full Production). This type of document will distinguish these products
and their designations wherever necessary, typically on the first page, the ordering information
page, and pages with the DC Characteristics table and the AC Erase and Program table (in the
table notes). The disclaimer on the first page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal
changes are expected, the Preliminary designation is removed from the data sheet. Nominal
changes may include those affecting the number of ordering part numbers available, such as the
addition or deletion of a speed option, temperature range, package type, or VIO range. Changes
may also include those needed to clarify a description or to correct a typographical error or incor-
rect specification. Spansion LLC applies the following conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s) described
herein. Spansion LLC deems the products to have been in sufficient production volume such that sub-
sequent versions of this document are not expected to change. However, typographical or specification
corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local AMD or Fujitsu
sales office.
ii
S71WS-Nx0 Based MCPs
S71WS-N_01_A4 September 15, 2005









No Preview Available !

S71WS-NX0 Даташит, Описание, Даташиты
S71WS-Nx0 Based MCPs
Stacked Multi-Chip Product (MCP)
128/256/512 Megabit (32M/16M x 16 bit) CMOS
1.8 Volt-only Simultaneous Read/Write,
Burst-mode Flash Memory with
pSRAM Type 4
ADVANCE
INFORMATION
General Description
The S71WS-N Series is a product line of stacked Multi-Chip Product (MCP) packages and consists
of the following items:
„ One or more flash memory die
„ pSRAM Type 4—Compatible pSRAM
The products covered by this document are listed in the table below. For details about their spec-
ifications, please refer to the individual constituent datasheet for further details.
Device
S71WS512ND0
S71WS256ND0
S71WS256NC0
S71WS128NC0
512 Mb
„
Flash Density
256 Mb
128 Mb
„
„
„
Distinctive Characteristics
MCP Features
„ Power supply voltage of 1.7 V to 1.95 V
„ Burst Speed: 54 MHz, 66 MHz
„ Package
— 8 x 11.6 mm, 9 x 12 mm
„ Operating Temperature
— Wireless, –25° C to +85° C
64 Mb
„
128 Mb
„
„
pSRAM Density
64 Mb
32 Mb
„
„
16 Mb
Publication Number S71WS-N_01 Revision A Amendment 4 Issue Date September 15, 2005
This document contains information on one or more products under development at Spansion LLC. The information is intended to help you evaluate this product. Do not
design in this product without contacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed product without notice.










Скачать PDF:

[ S71WS-NX0.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
S71WS-NX0Stacked Multi-Chip Product (MCP)SPANSION
SPANSION

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск