DataSheet26.com

S71WS-P PDF даташит

Спецификация S71WS-P изготовлена ​​​​«SPANSION» и имеет функцию, называемую «Burst Mode Flash Memory».

Детали детали

Номер произв S71WS-P
Описание Burst Mode Flash Memory
Производители SPANSION
логотип SPANSION логотип 

10 Pages
scroll

No Preview Available !

S71WS-P Даташит, Описание, Даташиты
www.DataSheet4U.com
S71WS-P based MCP Products
1.8 Volt-only x16 Simultaneous Read/Write, Burst Mode
Flash Memory with CellularRAM
Data Sheet (Advance Information)
S71WS-P based MCP Products Cover Sheet
Notice to Readers: This document states the current technical specifications regarding the Spansion
product(s) described herein. Each product described herein may be designated as Advance Information,
Preliminary, or Full Production. See Notice On Data Sheet Designations for definitions.
Publication Number S71WS-P_00 Revision A Amendment 2 Issue Date August 21, 2006









No Preview Available !

S71WS-P Даташит, Описание, Даташиты
Data Sheet (Advance Information)
Notice On Data Sheet Designations
Spansion Inc. issues data sheets with Advance Information or Preliminary designations to advise readers of
product information or intended specifications throughout the product life cycle, including development,
qualification, initial production, and full production. In all cases, however, readers are encouraged to verify
that they have the latest information before finalizing their design. The following descriptions of Spansion data
sheet designations are presented here to highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion Inc. is developing one or more specific
products, but has not committed any design to production. Information presented in a document with this
designation is likely to change, and in some cases, development on the product may discontinue. Spansion
Inc. therefore places the following conditions upon Advance Information content:
“This document contains information on one or more products under development at Spansion Inc.
The information is intended to help you evaluate this product. Do not design in this product without
contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this
proposed product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a commitment
to production has taken place. This designation covers several aspects of the product life cycle, including
product qualification, initial production, and the subsequent phases in the manufacturing process that occur
before full production is achieved. Changes to the technical specifications presented in a Preliminary
document should be expected while keeping these aspects of production under consideration. Spansion
places the following conditions upon Preliminary content:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. The Preliminary status of this document indicates that product qualification has been
completed, and that initial production has begun. Due to the phases of the manufacturing process that
require maintaining efficiency and quality, this document may be revised by subsequent versions or
modifications due to changes in technical specifications.”
Combination
Some data sheets contain a combination of products with different designations (Advance Information,
Preliminary, or Full Production). This type of document distinguishes these products and their designations
wherever necessary, typically on the first page, the ordering information page, and pages with the DC
Characteristics table and the AC Erase and Program table (in the table notes). The disclaimer on the first
page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal changes
are expected, the Preliminary designation is removed from the data sheet. Nominal changes may include
those affecting the number of ordering part numbers available, such as the addition or deletion of a speed
option, temperature range, package type, or VIO range. Changes may also include those needed to clarify a
description or to correct a typographical error or incorrect specification. Spansion Inc. applies the following
conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. Spansion Inc. deems the products to have been in sufficient production volume such
that subsequent versions of this document are not expected to change. However, typographical or
specification corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local AMD or Fujitsu sales office.
ii
S71WS-P based MCP Products
S71WS-P_00_A2 August 21, 2006









No Preview Available !

S71WS-P Даташит, Описание, Даташиты
S71WS-P based MCP Products
1.8 Volt-only x16 Simultaneous Read/Write, Burst Mode
Flash Memory with CellularRAM
Data Sheet (Advance Information)
Features
„ Power supply voltage of 1.7 to 1.95V
„ Flash access time: 80 ns, 25 ns
„ Flash burst frequencies: 66 MHz, 80 MHz, 108 MHz
„ pSRAM Access time: 70 ns, 20 ns
„ pSRAM burst frequency: 66 MHz, 80 MHz, 104 MHz
„ Package:
– 8.0 x 11.6 mm MCP
„ Operating Temperature
– –25°C to +85°C (wireless)
The S71WS series is a product line of stacked packages and consists of:
„ One or two S29WS-P NOR flash memory die
„ CellularRAM die
The products covered by this document are listed in the table below.
Device
S29WS512P
64 Mb
S71WS512PC0
CellularRAM Density (Mb)
128 Mb
S71WS512PD0
Note:
For a full list of OPNs, please contact the local sales representative or refer to the Ordering Information valid combinations tables.
For detailed specifications, please refer to the individual data sheets.
Document
S29WS-P
128 M CellularRAM Type 2
64 M CellularRAM Type 2
Publication Identification Number (PID)
S29WS-P_00
Cellram_04
Cellram_07
Publication Number S71WS-P_00 Revision A Amendment 2 Issue Date August 21, 2006
This document contains information on one or more products under development at Spansion LLC. The information is intended to help you evaluate this product. Do not design
in this product without contacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed product without notice.










Скачать PDF:

[ S71WS-P.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
S71WS-JStacked Multi-Chip Product (MCP)SPANSION
SPANSION
S71WS-NStacked Multi-Chip Product (MCP)SPANSION
SPANSION
S71WS-NX0Stacked Multi-Chip Product (MCP)SPANSION
SPANSION
S71WS-PBurst Mode Flash MemorySPANSION
SPANSION

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск