DataSheet26.com

S72MS-P PDF даташит

Спецификация S72MS-P изготовлена ​​​​«SPANSION» и имеет функцию, называемую «based MCP/PoP Products».

Детали детали

Номер произв S72MS-P
Описание based MCP/PoP Products
Производители SPANSION
логотип SPANSION логотип 

10 Pages
scroll

No Preview Available !

S72MS-P Даташит, Описание, Даташиты
www.DataSheet4U.com
S72MS-P based MCP/PoP Products
1.8 Volt-only x16 Flash Memory and SDRAM on Split Bus
NAND Interface ORNAND™ Flash on Bus 1
Mobile SDRAM on Bus 2
Data Sheet (Advance Information)
S72MS-P based MCP/PoP Products Cover Sheet
Notice to Readers: This document states the current technical specifications regarding the Spansion
product(s) described herein. Each product described herein may be designated as Advance Information,
Preliminary, or Full Production. See Notice On Data Sheet Designations for definitions.
Publication Number S72MS-P_00
Revision 01
Issue Date September 14, 2006









No Preview Available !

S72MS-P Даташит, Описание, Даташиты
Data Sheet (Advance Information)
Notice On Data Sheet Designations
Spansion Inc. issues data sheets with Advance Information or Preliminary designations to advise readers of
product information or intended specifications throughout the product life cycle, including development,
qualification, initial production, and full production. In all cases, however, readers are encouraged to verify
that they have the latest information before finalizing their design. The following descriptions of Spansion data
sheet designations are presented here to highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion Inc. is developing one or more specific
products, but has not committed any design to production. Information presented in a document with this
designation is likely to change, and in some cases, development on the product may discontinue. Spansion
Inc. therefore places the following conditions upon Advance Information content:
“This document contains information on one or more products under development at Spansion Inc.
The information is intended to help you evaluate this product. Do not design in this product without
contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed
product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a commitment
to production has taken place. This designation covers several aspects of the product life cycle, including
product qualification, initial production, and the subsequent phases in the manufacturing process that occur
before full production is achieved. Changes to the technical specifications presented in a Preliminary
document should be expected while keeping these aspects of production under consideration. Spansion
places the following conditions upon Preliminary content:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. The Preliminary status of this document indicates that product qualification has been
completed, and that initial production has begun. Due to the phases of the manufacturing process that
require maintaining efficiency and quality, this document may be revised by subsequent versions or
modifications due to changes in technical specifications.”
Combination
Some data sheets contain a combination of products with different designations (Advance Information,
Preliminary, or Full Production). This type of document distinguishes these products and their designations
wherever necessary, typically on the first page, the ordering information page, and pages with the DC
Characteristics table and the AC Erase and Program table (in the table notes). The disclaimer on the first
page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal changes
are expected, the Preliminary designation is removed from the data sheet. Nominal changes may include
those affecting the number of ordering part numbers available, such as the addition or deletion of a speed
option, temperature range, package type, or VIO range. Changes may also include those needed to clarify a
description or to correct a typographical error or incorrect specification. Spansion Inc. applies the following
conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. Spansion Inc. deems the products to have been in sufficient production volume such
that subsequent versions of this document are not expected to change. However, typographical or
specification corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local sales office.
ii
S72MS-P based MCP/PoP Products
S72MS-P_00_01 September 14, 2006









No Preview Available !

S72MS-P Даташит, Описание, Даташиты
S72MS-P based MCP/PoP Products
1.8 Volt-only x16 Flash Memory and SDRAM on Split Bus
NAND Interface ORNAND™ Flash on Bus 1
Mobile SDRAM on Bus 2
Data Sheet (Advance Information)
Features
„ Power supply voltage of 1.7 to 1.95V
„ Flash access time: 25 ns for ORNAND Flash
„ Mobile SDRAM burst frequency: 104 MHz (SDR), 133 MHz
(DDR)
„ ORNAND bus width: x8 or x16
„ Package:
„ 11.0 x 13.0 mm MCP
„ Operating Temperature
„ –25°C to +85°C (wireless)
The S72MS series is a product line of stacked packages and consists of:
„ One or two NAND Interface ORNAND die
„ Separate bus for one or more Mobile SDRAM die
The products covered by this document are listed in the table below.
Device
S72MS512PE0HF94V
ORNAND Flash Density
1024Mb
512Mb
X (x8)
512Mb
DRAM Density
256Mb
X (x16 SDR)
128Mb
For detailed specifications, please refer to the individual data sheets.
Document
S30MS-P
256 Mb Mobile SDR-DRAM Type 5
Publication Identification Number (PID)
S30MS-P_00
SDRAM_10
Publication Number S72MS-P_00
Revision 01
Issue Date September 14, 2006
This document contains information on one or more products under development at Spansion Inc. The information is intended to help you evaluate this product. Do not design in
this product without contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed product without notice.










Скачать PDF:

[ S72MS-P.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
S72MS-Pbased MCP/PoP ProductsSPANSION
SPANSION

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск