DataSheet26.com

S72NS256N PDF даташит

Спецификация S72NS256N изготовлена ​​​​«SPANSION» и имеет функцию, называемую «Based MCPs».

Детали детали

Номер произв S72NS256N
Описание Based MCPs
Производители SPANSION
логотип SPANSION логотип 

17 Pages
scroll

No Preview Available !

S72NS256N Даташит, Описание, Даташиты
www.DataSheet4U.com
S72NS-N Based MCPs
Stacked Multi-Chip Product (MCP) MirrorBitTM Flash Memory & DRAM
128 Mb (8 M x 16 bit)/256 Mb (16 M x 16 bit),
110nm CMOS 1.8 Volt-only, Multiplexed, Simultaneous Read/Write,
Burst Mode Flash Memory and 128/256-Mb (8/16-M x 16-bit) DDR
DRAM
Data Sheet
ADVANCE
INFORMATION
Notice to Readers: The Advance Information status indicates that this
document contains information on one or more products under development
at Spansion LLC. The information is intended to help you evaluate this product.
Do not design in this product without contacting the factory. Spansion LLC
reserves the right to change or discontinue work on this proposed product
without notice.
Publication Number S72NS128_256ND0_00 Revision B Amendment 1 Issue Date November 9, 2005









No Preview Available !

S72NS256N Даташит, Описание, Даташиты
Advance Information
Notice On Data Sheet Designations
Spansion LLC issues data sheets with Advance Information or Preliminary designations to advise
readers of product information or intended specifications throughout the product life cycle, includ-
ing development, qualification, initial production, and full production. In all cases, however,
readers are encouraged to verify that they have the latest information before finalizing their de-
sign. The following descriptions of Spansion data sheet designations are presented here to
highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion LLC is developing one or more spe-
cific products, but has not committed any design to production. Information presented in a
document with this designation is likely to change, and in some cases, development on the prod-
uct may discontinue. Spansion LLC therefore places the following conditions upon Advance
Information content:
“This document contains information on one or more products under development at Spansion LLC. The
information is intended to help you evaluate this product. Do not design in this product without con-
tacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed
product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a
commitment to production has taken place. This designation covers several aspects of the product
life cycle, including product qualification, initial production, and the subsequent phases in the
manufacturing process that occur before full production is achieved. Changes to the technical
specifications presented in a Preliminary document should be expected while keeping these as-
pects of production under consideration. Spansion places the following conditions upon
Preliminary content:
“This document states the current technical specifications regarding the Spansion product(s) described
herein. The Preliminary status of this document indicates that product qualification has been completed,
and that initial production has begun. Due to the phases of the manufacturing process that require
maintaining efficiency and quality, this document may be revised by subsequent versions or modifica-
tions due to changes in technical specifications.”
Combination
Some data sheets will contain a combination of products with different designations (Advance In-
formation, Preliminary, or Full Production). This type of document will distinguish these products
and their designations wherever necessary, typically on the first page, the ordering information
page, and pages with DC Characteristics table and AC Erase and Program table (in the table
notes). The disclaimer on the first page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal
changes are expected, the Preliminary designation is removed from the data sheet. Nominal
changes may include those affecting the number of ordering part numbers available, such as the
addition or deletion of a speed option, temperature range, package type, or VIO range. Changes
may also include those needed to clarify a description or to correct a typographical error or incor-
rect specification. Spansion LLC applies the following conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s) described
herein. Spansion LLC deems the products to have been in sufficient production volume such that sub-
sequent versions of this document are not expected to change. However, typographical or specification
corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local AMD or Fujitsu
sales office.
ii
S72NS128/256ND0 Based MCPs
S72NS128_256ND0_00_B1 November9,2005









No Preview Available !

S72NS256N Даташит, Описание, Даташиты
S72NS-N Based MCPs
Stacked Multi-Chip Product (MCP) MirrorBitTM Flash Memory & DRAM
128/256 Mb (8/16 M x 16 bit), 110nm CMOS 1.8 Volt-only,
Multiplexed, Simultaneous Read/Write, Burst Mode Flash Memory
and 128/256-Mb (8/16-M x 16-bit) DDR DRAM
Data Sheet
ADVANCE
INFORMATION
General Description
This document contains information on the S72NS-N MCP product family. Refer to the S29NS-N
data sheet (S29NS256/128N_01, revision A4) for full electrical specifications of the Flash memory
component. Refer to the DDR SDRAM Type 1 data sheet (revision A2) for full electrical specifica-
tions of the DDR SDRAM component. Refer to the DDR SDRAM Type 5 data sheet (revision A0)
for full electrical specifications of the DDR SDRAM component
The S72NS Series is a product line of stacked Multi-Chip Product (MCP) products and consists of:
„ One or more NS family multiplexed Flash memory die
„ DDR DRAM
The products covered by this document are listed in the table below.
Flash Density
128 Mb
256 Mb
512 Mb
Distinctive Characteristics
128 Mb
S72NS128ND0
S72NS256ND0
S72NS512ND0
DRAM Density
256 Mb
S72NS256ND0
S72NS512NE0
MCP Features
„ Power supply voltage of 1.7 V to 1.95 V
„ Burst Speeds
— Flash = 66 MHz, 80 MHz
— DRAM = 133 MHz
Product Selector Guide
„ Packages, 133-ball FBGA
— 11.0 x 10.0 x 1.0 mm
— 8.0 x 8.0 x 1.0 mm
„ Operating Temperature of 25°C to +85°C
Device- Model#
S72NS256ND0-7K
S72NS256ND0-7J
S72NS256ND0-73
S72NS256ND0-72
S72NS128ND0-1K
S72NS128ND0-1J
S72NS128ND0-13
S72NS128ND0-12
S72NS512ND0-7K
S72NS512ND0-7J
S72NS512ND0-73
S72NS512ND0-72
S72NS512NE0-7K
S72NS512NE0-7J
S72NS512NE0-73
S72NS512NE0-72
Flash Density
256 Mb
128 Mb
512 Mb
512 Mb
DRAM Density
128 Mb
128 Mb
128 Mb
256 Mb
Flash Speed (MHz)
66
80
66
80
66
80
66
80
66
80
66
80
66
80
66
80
DRAM Speed (MHz)
133
Supplier
DRAM
Type 1
DRAM
Type 5
DRAM
Type 1
DRAM
Type 5
Package
NLC133,
11x10mm
NLE133,
8x8mm
DRAM
Type 1
DRAM
133
Type 5
DRAM
MTA133
11x10mm
Type 1
DRAM
Type 5
Publication Number S72NS128_256ND0_00 Revision B Amendment 1 Issue Date November 9, 2005
This document contains information on one or more products under development at Spansion LLC. The information is intended to help you evaluate this product. Do not
design in this product without contacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed product without notice.










Скачать PDF:

[ S72NS256N.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
S72NS256NBased MCPsSPANSION
SPANSION
S72NS256PMirrorBit Flash Memory and DRAMSPANSION
SPANSION

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск