DataSheet26.com

S30MS-P PDF даташит

Спецификация S30MS-P изготовлена ​​​​«SPANSION» и имеет функцию, называемую «NAND Interface Memory Based».

Детали детали

Номер произв S30MS-P
Описание NAND Interface Memory Based
Производители SPANSION
логотип SPANSION логотип 

30 Pages
scroll

No Preview Available !

S30MS-P Даташит, Описание, Даташиты
www.DataSheet4U.com
S30MS-P ORNANDTMFlash Family
S30MS01GP, S30MS512P
1Gb/512Mb, x8/x16, 1.8 Volt NAND Interface Memory Based on
MirrorBitTechnology
Data Sheet (Preliminary)
S30MS-P ORNANDTMFlash Family Cover Sheet
Notice to Readers: This document states the current technical specifications regarding the Spansion
product(s) described herein. Each product described herein may be designated as Advance Information,
Preliminary, or Full Production. See Notice On Data Sheet Designations for definitions.
Publication Number S30MS-P_00
Revision A Amendment 7
Issue Date August 4, 2006









No Preview Available !

S30MS-P Даташит, Описание, Даташиты
Data Sheet (Preliminary)
Notice On Data Sheet Designations
Spansion LLC issues data sheets with Advance Information or Preliminary designations to advise readers of
product information or intended specifications throughout the product life cycle, including development,
qualification, initial production, and full production. In all cases, however, readers are encouraged to verify
that they have the latest information before finalizing their design. The following descriptions of Spansion data
sheet designations are presented here to highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion LLC is developing one or more specific
products, but has not committed any design to production. Information presented in a document with this
designation is likely to change, and in some cases, development on the product may discontinue. Spansion
LLC therefore places the following conditions upon Advance Information content:
“This document contains information on one or more products under development at Spansion LLC.
The information is intended to help you evaluate this product. Do not design in this product without
contacting the factory. Spansion LLC reserves the right to change or discontinue work on this
proposed product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a commitment
to production has taken place. This designation covers several aspects of the product life cycle, including
product qualification, initial production, and the subsequent phases in the manufacturing process that occur
before full production is achieved. Changes to the technical specifications presented in a Preliminary
document should be expected while keeping these aspects of production under consideration. Spansion
places the following conditions upon Preliminary content:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. The Preliminary status of this document indicates that product qualification has been
completed, and that initial production has begun. Due to the phases of the manufacturing process that
require maintaining efficiency and quality, this document may be revised by subsequent versions or
modifications due to changes in technical specifications.”
Combination
Some data sheets contain a combination of products with different designations (Advance Information,
Preliminary, or Full Production). This type of document distinguishes these products and their designations
wherever necessary, typically on the first page, the ordering information page, and pages with the DC
Characteristics table and the AC Erase and Program table (in the table notes). The disclaimer on the first
page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal changes
are expected, the Preliminary designation is removed from the data sheet. Nominal changes may include
those affecting the number of ordering part numbers available, such as the addition or deletion of a speed
option, temperature range, package type, or VIO range. Changes may also include those needed to clarify a
description or to correct a typographical error or incorrect specification. Spansion LLC applies the following
conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. Spansion LLC deems the products to have been in sufficient production volume
such that subsequent versions of this document are not expected to change. However, typographical
or specification corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local sales office.
ii
S30MS-P ORNANDTMFlash Family
S30MS-P_00_A7 August 4, 2006









No Preview Available !

S30MS-P Даташит, Описание, Даташиты
S30MS-P ORNANDTM Flash Family
S30MS01GP, S30MS512P
1Gb/512Mb, x8/x16, 1.8 Volt NAND Interface Memory Based on
MirrorBitTechnology
Data Sheet (Preliminary)
Distinctive Characteristics
„ Single Power Supply Operation
– 1.8 volt read, erase, and program operations
– VCC = 1.7 to 1.95V
„ Manufactured on 90 nm MirrorBitTM Process Technology
„ Bus widths - x8 and x16
„ Page Size
– Full Page Read
2K + 64 Byte
– Partial Page Read
512 + 16 Byte
„ Block (erase unit) Architecture
– Number of Blocks
1Gb: 1K blocks
512Mb: 512 blocks
– Block Size
128K + 4K Byte
„ Compatibility with NAND Flash I/O
– Provides pinout and command set compatibility with single-power
supply NAND flash
„ High-Performance Cache Register
– Cache Register matches page size to improve programming
throughput
„ 100,000 Program/Erase Cycles per Sector Typical
„ 10-Year Data Retention Typical
„ Operating Temperature Ranges
– Wireless (-25°C to +85°C)
„ Package options
– 48-pin TSOP
– 137-ball FBGA MCP Compatible
„ 100% Valid Blocks
Performance Characteristics
Read Access Times (Maximum)
Full Page Random Access
Partial Page Random Access
Serial Read
25 µs
8 µs
25ns
Legend:
b = bit, B = Byte, K = 1024, M = 1048576
Read Current
Erase Current
Program Current
Standby Current
Current Consumption (typical)
40 mA
60 mA
60 mA
10 uA
Read, Program and Erase Performance (typical)
x8 x16
Program
2.3 MB/s
2.4 MB/s
Erase
2.7 MB/s
2.7 MB/s
Full Page Read
26.7 MB/s
40.1 MB/s
Partial Page Read
24.3 MB/s
34.9 MB/s
Publication Number S30MS-P_00
Revision A Amendment 7
Issue Date August 4, 2006
This document states the current technical specifications regarding the Spansion product(s) described herein. The Preliminary status of this document indicates that product qual-
ification has been completed, and that initial production has begun. Due to the phases of the manufacturing process that require maintaining efficiency and quality, this document
may be revised by subsequent versions or modifications due to changes in technical specifications.










Скачать PDF:

[ S30MS-P.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
S30MS-PNAND Interface Memory BasedSPANSION
SPANSION

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск