DataSheet26.com

S70GL256M00 PDF даташит

Спецификация S70GL256M00 изготовлена ​​​​«SPANSION» и имеет функцию, называемую «Uniform Sector Flash Memory».

Детали детали

Номер произв S70GL256M00
Описание Uniform Sector Flash Memory
Производители SPANSION
логотип SPANSION логотип 

30 Pages
scroll

No Preview Available !

S70GL256M00 Даташит, Описание, Даташиты
www.DataSheet4U.com
S70GL256M00
256 Megabit (8 M x 32-Bit/16 M x 16-Bit)
MirrorBit3.0 Volt-only Uniform Sector Flash Memory
with Versatile I/OControl
Data Sheet (Retired Product)
S70GL256M00 Cover Sheet
This product has been retired and is not recommended for designs. For new and current designs,
S29GL256N supersedes S70GL256M and is the factory-recommended migration path for this device.
Please refer to the S29GL256N Datasheet for specifications and ordering information. Availability of this
document is retained for reference and historical purposes only.
Notice to Readers: This document states the current technical specifications regarding the Spansion
product(s) described herein. The Preliminary status of this document indicates that product qualification has
been completed, and that initial production has begun. Due to the phases of the manufacturing process that
require maintaining efficiency and quality, this document may be revised by subsequent versions or
modifications due to changes in technical specifications.
Publication Number S70GL256M00_00 Revision A Amendment 1
Issue Date October 31, 2006









No Preview Available !

S70GL256M00 Даташит, Описание, Даташиты
Data Sheet
Notice On Data Sheet Designations
Spansion Inc. issues data sheets with Advance Information or Preliminary designations to advise readers of
product information or intended specifications throughout the product life cycle, including development,
qualification, initial production, and full production. In all cases, however, readers are encouraged to verify
that they have the latest information before finalizing their design. The following descriptions of Spansion data
sheet designations are presented here to highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion Inc. is developing one or more specific
products, but has not committed any design to production. Information presented in a document with this
designation is likely to change, and in some cases, development on the product may discontinue. Spansion
Inc. therefore places the following conditions upon Advance Information content:
“This document contains information on one or more products under development at Spansion Inc.
The information is intended to help you evaluate this product. Do not design in this product without
contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed
product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a commitment
to production has taken place. This designation covers several aspects of the product life cycle, including
product qualification, initial production, and the subsequent phases in the manufacturing process that occur
before full production is achieved. Changes to the technical specifications presented in a Preliminary
document should be expected while keeping these aspects of production under consideration. Spansion
places the following conditions upon Preliminary content:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. The Preliminary status of this document indicates that product qualification has been
completed, and that initial production has begun. Due to the phases of the manufacturing process that
require maintaining efficiency and quality, this document may be revised by subsequent versions or
modifications due to changes in technical specifications.”
Combination
Some data sheets contain a combination of products with different designations (Advance Information,
Preliminary, or Full Production). This type of document distinguishes these products and their designations
wherever necessary, typically on the first page, the ordering information page, and pages with the DC
Characteristics table and the AC Erase and Program table (in the table notes). The disclaimer on the first
page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal changes
are expected, the Preliminary designation is removed from the data sheet. Nominal changes may include
those affecting the number of ordering part numbers available, such as the addition or deletion of a speed
option, temperature range, package type, or VIO range. Changes may also include those needed to clarify a
description or to correct a typographical error or incorrect specification. Spansion Inc. applies the following
conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. Spansion Inc. deems the products to have been in sufficient production volume such
that subsequent versions of this document are not expected to change. However, typographical or
specification corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local sales office.
ii
S70GL256M00
S70GL256M00_00_A1 October 31, 2006









No Preview Available !

S70GL256M00 Даташит, Описание, Даташиты
DATA SHEET
S70GL256M00
256 Megabit (8 M x 32-Bit/16 M x 16-Bit) MirrorBit3.0
Volt-only Uniform Sector Flash Memory with Versatile I/O
Control
This product has been retired and is not recommended for designs. For new and current designs, S29GL256N supersedes S70GL256M and is the factory-recommended migration path
for this device. Please refer to the S29GL256N Datasheet for specifications and ordering information. Availability of this document is retained for reference and historical purposes only.
Distinctive Characteristics
ARCHITECTURAL ADVANTAGES
Single power supply operation
— 3 volt read, erase, and program operations
VersatileI/OTM control
— Device generates data output voltages and tolerates
data input voltages on the CE# and DQ inputs/outputs
as determined by the voltage on the VIO pin; operates
from 1.65 to 3.6 V
Manufactured on 0.23 µm MirrorBitTM process
technology
SecSi(Secured Silicon) Sector region
— 128-doubleword/256-word sector for permanent,
secure identification through an
8-doubleword/16-word random Electronic Serial
Number, accessible through a command sequence
— May be programmed and locked at the factory or by
the customer
Flexible sector architecture
— Two hundred fifty-six 32 Kdoubleword (64 Kword)
sectors
Compatibility with JEDEC standards
— Provides pinout and software compatibility for
single-power supply flash, and superior inadvertent
write protection
100,000 erase cycles typical per sector
20-year data retention typical
PERFORMANCE CHARACTERISTICS
High performance
— 110 ns access time
— 30 ns page read times
— 0.5 s typical sector erase time
— 15 µs typical write buffer doubleword programming
time: 16-doubleword/32-word write buffer reduces
overall programming time for multiple-word updates
— 4-doubleword/8-word page read buffer
— 16-doubleword/32-word write buffer
Low power consumption (typical values at 3.0 V, 5
MHz)
— 26 mA typical active read current
— 100 mA typical erase/program current
— 2 µA typical standby mode current
Package options
— 80-ball Fortified BGA
SOFTWARE & HARDWARE FEATURES
Software features
— Program Suspend & Resume: read other sectors
before programming operation is completed
— Erase Suspend & Resume: read/program other
sectors before an erase operation is completed
— Data# polling & toggle bits provide status
— Unlock Bypass Program command reduces overall
programming time
— CFI (Common Flash Interface) compliant: allows host
system to identify and accommodate multiple flash
devices
Hardware features
— Sector Group Protection: hardware-level method of
preventing write operations within a sector group
— Temporary Sector Group Unprotect: VID-level method
of changing code in locked sector groups
— WP#/ACC input accelerates programming time
(when high voltage is applied) for greater throughput
during system production. Protects first or last sector
group regardless of sector group protection settings
— Hardware reset input (RESET#) resets device
— Ready/Busy# output (RY/BY#) detects program or
erase cycle completion
Publication# S70GL256M00_00 Rev: A Amendment: 1
Issue Date: October 31, 2006










Скачать PDF:

[ S70GL256M00.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
S70GL256M00Uniform Sector Flash MemorySPANSION
SPANSION

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск