Z86L9900100ZEM PDF даташит
Спецификация Z86L9900100ZEM изготовлена «Zilog» и имеет функцию, называемую «ICEBOX». |
|
Детали детали
Номер произв | Z86L9900100ZEM |
Описание | ICEBOX |
Производители | Zilog |
логотип |
30 Pages
No Preview Available ! |
www.DataSheet4U.com
Z86L9900100ZEM
Z86L99 ICEBOX
User Manual
UM005100-IRR0400
ZiLOG WORLDWIDE HEADQUARTERS • 910 E. HAMILTON AVENUE • CAMPBELL, CA 95008
TELEPHONE: 408.558.8500 • FAX: 408.558.8300 • WWW.ZILOG.COM
No Preview Available ! |
This publication is subject to replacement by a later edition. To determine whether a later edition exists, or to
request copies of publications, contact
ZiLOG Worldwide Headquarters
910 E. Hamilton Avenue
Campbell, CA 95008
Telephone: 408.558.8500
Fax: 408.558.8300
www.ZiLOG.com
Windows is a registered trademark of Microsoft Corporation.
Document Disclaimer
© 2000 by ZiLOG, Inc. All rights reserved. Information in this publication concerning the devices, applications, or
technology described is intended to suggest possible uses and may be superseded. ZiLOG, INC. DOES NOT ASSUME
LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE INFORMATION, DEVICES, OR
TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZiLOG ALSO DOES NOT ASSUME LIABILITY FOR
INTELLECTUAL PROPERTY INFRINGEMENT RELATED IN ANY MANNER TO USE OF INFORMATION,
DEVICES, OR TECHNOLOGY DESCRIBED HEREIN OR OTHERWISE. Except with the express written approval
ZiLOG, use of information, devices, or technology as critical components of life support systems is not authorized. No
licenses or other rights are conveyed, implicitly or otherwise, by this document under any intellectual property rights.
Follow the precautions listed below to avoid permanent damage to the emulator.
I. Always use a grounding strap to prevent damage resulting from electrostatic discharge (ESD).
II. Power-Up Precautions.
1. Ensure that all power to the emulator and the target application (if any) is turned OFF.
2. Connect the target pod to the target application (if any).
ii UM005100-IRR0400
No Preview Available ! |
Electrical
Safeguards
Follow the precautions listed below to avoid permanent damage to the emulator.
I. Always use a grounding strap to prevent damage resulting from electrostatic discharge (ESD).
II. Power-Up Precautions.
3. Ensure that all power to the emulator and the target application (if any) is turned OFF.
4. Connect the target pod to the target application (if any).
5. Power up the emulator, then press the RESET button.
6. Power up the target application (if any).
III Power-Down Precautions.
When powering down, follow this procedure in the precise order shown below:
1. Power down the target application board (if any).
2. Remove the target pod.
3. Power down the emulator.
NOTES:
1. Refer to the ÒPrecaution ListÓ section of the Product Information sheet for additional operating
precautions specific to various devices.
2. Do not leave the emulator powered up with the RS-232C cable connected to a powered-down PC.
3. Before inserting target pod into target application board, refer to Chapter 2 to determine appropriate
jumper selections and options.
UM005100-IRR0400
iii
Скачать PDF:
[ Z86L9900100ZEM.PDF Даташит ]
Номер в каталоге | Описание | Производители |
Z86L9900100ZEM | ICEBOX | Zilog |
Номер в каталоге | Описание | Производители |
TL431 | 100 мА, регулируемый прецизионный шунтирующий регулятор |
Unisonic Technologies |
IRF840 | 8 А, 500 В, N-канальный МОП-транзистор |
Vishay |
LM317 | Линейный стабилизатор напряжения, 1,5 А |
STMicroelectronics |
DataSheet26.com | 2020 | Контакты | Поиск |