|
|
PDF OP268FPS Data sheet ( Hoja de datos )
| Número de pieza | OP268FPS | |
| Descripción | Plastic Point Source | |
| Fabricantes | OPTEK Technologies | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de OP268FPS (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Product Bulletin OP268FPS
November 2000
Plastic Point Source Infrared Emitting Diode
Type OP268FPS
Features
•Point source irradiance pattern
• Flat lensed for wide radiation angle
•Easily stackable on 0.100”(2.54 mm)
hole centers
Description
The OP268FPS contains an 850 nm
gallium aluminum arsenide infrared
emitting diode molded in an
“end-looking”miniature black package.
This device has a wide radiation angle
due to its flat emitting surface. The point
source GaAIAs IRED emits photons from
a 0.004”diameter area centered with the
optical centerline. Small size and 0.100”
(2.54 mm) lead spacing allow
considerable design flexibility.
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V
Continuous Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Peak Forward Current (2 µs pulse width, 0.1% duty cycle). . . . . . . . . . . . . . . . . . 1.0 A
Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . . -40°C to +100°C
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering
iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C (1)
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(2)
NOTES:
(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow
soldering. Maximum 20 grams force may be applied to the leads when soldering.
(2) Derate linearly 1.33 mW/°C above 25°C.
(3) Ee(APT) is a measurement of the average apertured radiant energy incident upon a sensing
area 0.081”(2.06 mm) in diameter, perpendicular to and centered on the mechanical axis of
the “emitting surface”and 0.400”(10.16 mm) from the measurement surface. Ee(APT) is not
necessarily uniform within the measured area.
The stable VF vs. Temperature
characteristic make them ideal for
applications where voltage is limited
(such as battery operation).
The low tr/tf make them ideal for high
speed operation.
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
11
(972) 323-2200
Fax (972) 323-2396
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet OP268FPS.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| OP268FPS | Plastic Point Source | OPTEK Technologies |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |