DataSheet26.com

HA9P2444-5 PDF даташит

Спецификация HA9P2444-5 изготовлена ​​​​«Intersil Corporation» и имеет функцию, называемую «50MHz/ Selectable/ Four Channel Video Operational Amplifier».

Детали детали

Номер произв HA9P2444-5
Описание 50MHz/ Selectable/ Four Channel Video Operational Amplifier
Производители Intersil Corporation
логотип Intersil Corporation логотип 

6 Pages
scroll

No Preview Available !

HA9P2444-5 Даташит, Описание, Даташиты
NOCNTalOlRCEReCEnOCtroMOarlMMwAEMwpNEpwDNl.iEicDnaDEtteiDForsOnRislRE.c1PNo-L8mEA8W/8Cts-EDIcNMETSEEINGRTSNISL November 1999
HA-2444
FN2490.8
50MHz, Selectable, Four Channel
Video Operational Amplifier
The HA-2444 is a channel-selectable video op amp
consisting of four differential inputs, a single-ended output,
and digital control circuitry allowing two digital inputs to
activate one of the four differential inputs. The HA-2444 also
includes a high impedance output state allowing the outputs
of multiple HA-2444s to be wire-OR’d. Functionally, the
HA-2444 is equivalent to four wideband video op amps and
a wideband multiplexer.
Unlike similar competitor devices, the HA-2444 is not
restricted to multiplexing. Any op amp configuration can be
used with any of the inputs. Signal amplification, addition,
integration, and more can be put under digital control with
broadcast quality performance.
The key video parameters of the HA-2444 have been
optimized without compromising DC performance. Gain
Flatness to 10MHz is only 0.1dB. Differential gain and phase
are typically 0.03% and 0.03 degrees, respectively. Laser
trimming allows offset voltages in the 4.0mV range and a
unique common current source design assures minimal
channel-to-channel mismatch, while maintaining 60dB of
crosstalk rejection at 5MHz. Open loop gain of 76dB and low
input offset and bias currents enhance the performance of
this versatile device.
For information about military grade devices, please refer to
the HA-2444/883 data sheet.
Pinout
HA-2444
(PDIP, SOIC)
TOP VIEW
GND 1
EN 2
+IN2 3
-IN2 4
V- 5
+IN1 6
-IN1 7
OUT 8
DECODE
CONTROL
16 D1
15 D0
14 +IN4
13 -IN4
12 V+
11 +IN3
10 -IN3
9 N/C
Features
• Digital Selection of Input Channel
• Unity Gain Stability
• Gain Flatness to 10MHz. . . . . . . . . . . . . . . . . . . . . . 0.1dB
• Differential Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.03%
• Differential Phase . . . . . . . . . . . . . . . . . . . . . 0.03 Degrees
• Fast Channel Selection . . . . . . . . . . . . . . . . . . . . . . 60ns
• Crosstalk Rejection . . . . . . . . . . . . . . . . . . . . . . . . . 60dB
Applications
• Video Multiplexer
• Programmable Gain Amplifier
• Special Effects Processors
• Video Distribution Systems
• Heads-up/Night Vision Displays
• Medical Imaging Systems
• Radar Video
Ordering Information
PART NUMBER
HA3-2444-5
HA9P2444-5
TEMP.
RANGE (oC)
PACKAGE
0 to 75 16 Ld PDIP
0 to 75 16 Ld SOIC
PKG.
NO.
E16.3
M16.3
Truth Table
EN D1
HL
HL
HH
HH
LX
D0
L
H
L
H
X
L = Low State (0.8V Max)
H = High State (2.4V Min)
X = Don’t Care
SELECTED
CHANNEL
1
2
3
4
NONE-OUT is set to a high
impedance state.
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999









No Preview Available !

HA9P2444-5 Даташит, Описание, Даташиты
HA-2444
Absolute Maximum Ratings
Supply Voltage Between V+ and V- Terminals. . . . . . . 35V (±17.5V)
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±VS
Digital Input Voltage . . . . . . . . . . . . . . . . . GND +7.5V to GND -0.5V
Peak (Short Duration) Output Current . . . . . . . . . . . . . . . . . . ±40mA
Operating Conditions
Temperature Range
HA-2444-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0oC to 75oC
Thermal Information
Thermal Resistance (Typical, Note 1)
θJA (oC/W)
PDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
80
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
96
Maximum Junction Temperature (Die Only) . . . . . . . . . . . . . . . 175oC
Maximum Junction Temperature (Plastic Package) . . . . . . . 150oC
Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300oC
(SOIC - Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. θJA is measured with the component mounted on an evaluation PC board in free air.
Electrical Specifications VS = ±15V, RL = 1k, CL 10pF, VIL = 0.8V, VIH = 2.4V. Unless Otherwise Specified
Specifications Apply to All Channels
PARAMETER
TEMP.
HA-2444-5
TEST CONDITIONS
(oC)
MIN
TYP
MAX
INPUT CHARACTERISTICS
Input Offset Voltage
25 - 4 7
Full -
- 15
Average Input Offset Voltage Drift
Full - 10 -
Channel to Channel Offset Voltage Mismatch
25 - - 5
Full - - 8
Input Bias Current
25 -
9 15
Full -
- 20
Average Input Bias Current Drift
Full - 0.04 -
Input Offset Current
25 - 2 4
Full - - 6
Average Input Offset Current Drift
Full - 10 -
Common Mode Range
Full -
±11.5
-
Differential Input Resistance (Note 2)
25 50
90
-
Differential Input Capacitance
25 - 3 -
Input Noise Voltage Density
f = 1000Hz
25 - 26 -
Input Noise Current Density
f = 1000Hz
25 - 4 -
TRANSFER CHARACTERISTICS
Large Signal Voltage Gain
Common Mode Rejection Ratio
Minimum Stable Gain
VOUT = ±5V
VCM = ±5V
25 71
Full 68
Full 70
25 +1
76
-
80
-
-
-
-
-
Unity Gain Bandwidth
Gain Bandwidth Product
OUTPUT CHARACTERISTICS
Output Voltage Swing
Output Voltage Swing (Note 2)
Full Power Bandwidth (Note 3)
Output Current (Note 12)
AV = +1, VOUT = ±100mV
VOUT = ±100mV
25
25
RL = 1k
RL = 75
Full
25
Full
Full
-
-
±10
±2
3.8
±25
45
50
±11
-
5.1
-
-
-
-
-
-
-
Disabled Output Current (Note 13)
Full -
- 860
Output Resistance
25 - 20 -
UNITS
mV
mV
µV/oC
mV
mV
µA
µA
µA/oC
µA
µA
nA/oC
V
k
pF
nV/Hz
pA/Hz
dB
dB
dB
V/V
MHz
MHz
V
V
MHz
mA
µA
2









No Preview Available !

HA9P2444-5 Даташит, Описание, Даташиты
HA-2444
Electrical Specifications VS = ±15V, RL = 1k, CL 10pF, VIL = 0.8V, VIH = 2.4V. Unless Otherwise Specified
Specifications Apply to All Channels (Continued)
PARAMETER
TEMP.
HA-2444-5
TEST CONDITIONS
(oC)
MIN
TYP
MAX
UNITS
TRANSIENT RESPONSE
Rise Time (Note 4)
Overshoot (Note 4)
Slew Rate (Note 6)
Settling Time
AV = +1
AV = +1
AV = +1
25 - 7 - ns
25 - 10 - %
Full 120
160
-
V/µs
25 - 120 -
ns
SWITCHING CHARACTERISTICS
Channel Select Time
Note 7
0 to 85
-
60 100 ns
-40 to 0
-
80 125 ns
Output Enable Time
Note 8
Full -
40 100 ns
Digital Input Voltages
D0/D1 Input Current
EN Input Current
Crosstalk Rejection
VIH
VIL
VIL = 0.0V
VIH = 5.0V
VIL = 0.0V
VIH = 5.0V
Note 9
Full 2.4
-
-V
Full -
- 0.8 V
Full - 0.7 1 mA
Full -
- 1.2 µA
Full -
- 50 µA
Full -
- 1.2 µA
25 - 60 - dB
VIDEO PARAMETERS
Differential Phase
Note 11
25 - 0.03 - Degrees
Differential Gain
Note 11
25 -
0.03
-
%
Gain Flatness (Note 10)
Chrominance to Luminance Gain
10MHz, AV = +1
Note 11
25 - 0.1 - dB
25 - 0.1 - dB
Chrominance to Luminance Delay
Note 11
25 - 7 - ns
POWER SUPPLY
ICC
IEE
Supply Current (Output Disabled)
Note 14
Full -
Full -
Full -
20 25 mA
20 25 mA
- 10 mA
PSRR
Supply Voltage Range
VS = ±15V to ±20V
Full 65
±8.5
80 - dB
-
±17.0
V
NOTES:
2. These parameters are not tested. The limits are guaranteed based on lab characterization and reflect lot to lot variation.
3.
4.
Full Power Bandwidth is calculated by:
VOUT = 0 to ±200mV.
FPBW
=
-S----l-e---w-----R----a---t-e--
2πVPEAK
;
VPEAK
=
5V .
5. Settling time to 0.1% with a 10V step. Specified with the channel pre-selected and the output stage enabled. AV = -1.
6. VOUT = -5V to +5V or +5V to -5V.
7. The time required for an enabled HA-2444 to switch from one input channel to another. Measured from the 50% point of the digital input to 50%
of the output. AV = +1 for all channels. VOUT switches from 0V to 5V.
8. The time required to enable the output with a channel preselected. Measured from the 50% point of the Enable input to 4V on the output.
AV = +1 for all channels. VIN = 5V for the selected channel.
9. VIN = 5VP-P, f = 5MHz, for one of the 3 unselected channels. VIN = 0 for the selected channel. AV = +1 for all channels.
10. VIN = 200mVRMS.
11. Tested with a VM700A video tester using a NTC-7 Composite input signal.
12. VOUT = ±10V, VEN = 2.4V, 50% Duty Cycle Max.
13. VOUT = ±5V, VEN = 0.8V.
14. Applies to ICC and IEE. VOUT = 0V, VEN = 0.8V.
3










Скачать PDF:

[ HA9P2444-5.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
HA9P2444-550MHz/ Selectable/ Four Channel Video Operational AmplifierIntersil Corporation
Intersil Corporation

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск