HEDM-512X Datasheet PDF - Hewlett-Packard
| Part Number | HEDM-512X | |
| Description | (HEDx-x1xX) Two and Three Channel Codewheels | |
| Manufacturers | Hewlett-Packard | |
| Logo |  |
|
|
There is a preview and HEDM-512X download ( pdf file ) link at the bottom of this page. Total 14 Pages | ||
Preview 1 page No Preview Available !
www.DataSheet4U.com
Two and Three Channel
Codewheels for Use with Agilent
Optical Encoder Modules
Technical Data
HEDS-51X0/61X0 Series
HEDG-512X/612X Series
HEDM-512X/61XX Series
Features:
• Codewheels Available in
Glass, Film, and Metal
• Available in Two Standard
Diameters
• Cost Effective
• Resolutions from 96 CPR to
2048 CPR
• For Use with HEDS-90XX/
91XX Series Two and Three
Channel Encoders
Description
Agilent Technologies offers a
wide variety of codewheels for
use with Agilent’s HEDS-9000,
HEDS-9100, HEDS-9040, and
HEDS-9140 series Encoder
Modules. Designed for many
environments, applications, and
budgets, Agilent codewheels are
available in Glass, Film, and
Metal. These codewheels are
available in resolutions from 96
Counts Per Revolution (CPR) to
1024 CPR on an 11 mm optical
radius and 500 to 2048 CPR on a
23.36 mm optical radius.
Each of the three codewheel
materials offers a certain
advantage. Metal codewheels are
the most versatile, with a tem-
perature rating up to 100°C,
resolution to 512 CPR (28 mm
diameter), as well as 2 and 3
channel outputs. Film codewheels
offer higher resolution (up to
1024 CPR on a 28 mm diameter)
with an operating temperature of
70°C. Glass codewheels combine
the best of film and metal, offer-
ing a temperature rating of 100°C
and resolutions to 1024 CPR on a
28 mm diameter.
In addition, each material offers a
specific reliability rating. It is
important to consider the specific
application operating environ-
ment, long term operating
conditions, and temperature
ranges when choosing a code-
wheel material.
Also See:
• HEDS-9000/HEDS-9100
Encoder Module Data Sheet
• HEDS-9000/9100/9200
Extended Resolution Encoder
Module Data Sheet
• HEDS-9040/9140 Three
Channel Encoder Module Data
Sheet
• HEDS-9700 Small Encoder
Module Data Sheet
|
| |
 
5
Assembly Instructions Using
Agilent Assembly Tools
Instructions
shim should not contact the
1. Place codewheel on shaft.
codewheel boss.
2. Set codewheel height:
(a) Place the correct gap
setting tool (per Ordering
Information Table) on motor
base, flush up against the
motor shaft as shown in Figure
(b) Push codewheel down
against gap setting shim. The
codewheel is now at the proper
height.
(c) Tighten codewheel
setscrew.
2. The shim has two different
3. Insert mounting screws
size steps. Choose the one that
through module and thread
most closely matches the width
into the motor base. Do not
of the codewheel boss. The
tighten screws.
4. Slide the HEDS-8905 or HEDS-
8906 centering tool over
codewheel hub and onto
module as shown in Figure 3.
The pins of the alignment tool
should fit snugly inside the
alignment recesses of the
module.
5. While holding alignment tool in
place, tighten screws down to
secure module.
6. Remove alignment tools.
IMAGE SIDE OF CODEWHEEL
GAP SETTING SHIM
CODEWHEEL
MODULE SIDE A
MODULE SIDE B
CENTERING TOOL
CODEWHEEL
ALIGNING RECESSES
MODULE SIDE A
MODULE SIDE B
Figure 2. Alignment Tool is Used to Set Height of
Codewheel.
Figure 3. Alignment Tool is Placed over Shaft and onto
Codewheel Hub. Alignment Tool Pins Mate with
Aligning Recesses on Module.
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for HEDM-512X electronic component. |
| Information | Total 14 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ HEDM-512X.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| HEDM-512X | The function is (HEDx-x1xX) Two and Three Channel Codewheels. Hewlett-Packard | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
HEDM
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||