DataSheet26.com

WMS7201 PDF даташит

Спецификация WMS7201 изготовлена ​​​​«Winbond» и имеет функцию, называемую «256-TAP NON-VOLATILE DIGITAL POTENTIOMETER».

Детали детали

Номер произв WMS7201
Описание 256-TAP NON-VOLATILE DIGITAL POTENTIOMETER
Производители Winbond
логотип Winbond логотип 

29 Pages
scroll

No Preview Available !

WMS7201 Даташит, Описание, Даташиты
www.DataSheet4U.com
PRELIMINARY
WMS7201
256-TAP NON-VOLATILE DIGITAL POTENTIOMETER
Publication Release Date: January 2003
- 1 - Revision 1.1









No Preview Available !

WMS7201 Даташит, Описание, Даташиты
WMS7201
1. GENERAL DESCRIPTION
The WMS7201 is a 256-tap, single-channel non-volatile digital potentiometer available in 10K, 50K
and 100Kend-to-end resistances. These devices can be used as a three-terminal potentiometer or
as a two terminal variable resistor in a wide variety of applications.
The output of the potentiometer is determined by the wiper position, which varies linearly between VA
and VB terminal according to the content stored in the volatile Tap Register (TR). The settings of the
TR can be provided either directly by the user through the industry standard SPI interface, or by the
non-volatile memory (NVMEM0~3) where the previous settings are stored. When changes are made
to the TR to establish a new wiper position, the value of the setting can be saved into any non-volatile
memory location (NVMEM0~3) by executing a NVMEM save operation. Upon powerup the content of
the NVMEM0 is automatically loaded to the Tap Register.
The WMS7201 contains a single potentiometer in 8-pin PDIP, SOIC, MSOP or 10 pin TSSOP
packages and can operate over a wide operating voltage range from 2.7V to 5.5V. A selectable output
buffer is built-in for those applications where an output buffer is required.
2. FEATURES
256 taps for the potentiometer
End-to-end resistance available in 10K, 50Kand 100K
Selectable output buffer for each channel
SPI Serial Interface for data transfer and potentiometer control
Daisy-chain operation for multiple devices (10-pin TSSOP package only)
Nonvolatile storage of four wiper positions per channel with power-on recall from NVMEM0
Low standby current (1µA Max. with output buffer inactive)
Endurance 100K typical stores per bit
Register Data Retention 100 years
Industrial temperature range: -40 ~ 85°C
Wide operating voltage range: 2.7V ~ 5.5V
Package option:
8-pin MSOP, 8-pin SOIC, 8-pin PDIP, 10-pin TSSOP
-2-









No Preview Available !

WMS7201 Даташит, Описание, Даташиты
3. BLOCK DIAGRAM
WMS7201
CLK
Serial
CS
Interface
SDI
1
SDO
1
WP
VDD
NV Memory
Control
VA1
VW1
NV Memory
Power on/Preset Mem Tap
3 Addressable Preset Tap values
9th
bit
9th
bit
VB1
VSS
FIGURE 1 – WMS7201 BLOCK DIAGRAM
Note 1: Available in 10-pin TSSOP packages only.
Publication Release Date: January 2003
- 3 - Revision 1.1










Скачать PDF:

[ WMS7201.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
WMS7201256-TAP NON-VOLATILE DIGITAL POTENTIOMETERWinbond
Winbond
WMS7202256-TAP DUAL-CHANNEL NON-VOLATILE DIGITALWinbond
Winbond
WMS7204256-TAP QUAD-CHANNEL NON-VOLATILE DIGITAL POTENTIOMETERWinbond
Winbond

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск