|
|
Número de pieza | HAC800-S | |
Descripción | Current Transducers HAC 100 ~800-S | |
Fabricantes | LEM | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HAC800-S (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Current Transducers HAC 100 ... 800-S
IPN = 100 .. 800 A
For the electronic measurement of currents: DC, AC, pulsed, mixed,
with a galvanic isolation between the primary circuit (high power) and
the secondary circuit (electronic circuit).
Preliminary
Electrical data
Primary nominal
r.m.s. current
I (A)
PN
100
200
300
400
600
800
Primary current
measuring range
I (A)
P
± 300
± 600
± 900
± 900
± 1800
± 1800
Type
HAC 100-S
HAC 200-S
HAC 300-S
HAC 400-S
HAC 600-S
HAC 800-S
VC Supply voltage (± 5 %)
± 15
V
IC
Current consumption
HAC 100-S .. 400-S
< ± 18
mA
HAC 600-S .. 800-S
< ± 25
mA
Vd
R.m.s. voltage for AC isolation test, 50/60 Hz, 1 mn 2.5
kV
RIS Isolation resistance @ 500 VDC
> 1000 MΩ
VOUT
Output voltage @ ± IPN, RL = 10 kΩ, TA = 25°C
±4
V
ROUT Output internal resistance
100 Ω
RL Load resistance
>10 kΩ
Accuracy - Dynamic performance data
X
εL
VOE
VOH
εVOT
TC G
tr
f
Accuracy @ IPN, TA = 25°C (without offset)
Linearity (0 .. ± IPN)
Electrical offset voltage, TA = 25°C
Hysteresis offset voltage @ IP = 0;
after an excursion of 1 x IPN
Thermal drift of VOE
Thermal drift (% of reading)
Response time @ 90% of IP
Frequency bandwidth (- 3 dB)1)
General data
TA Ambient operating temperature
TS Ambient storage temperature
m Mass
< ± 1 % of IPN
< ± 1 % of IPN
< ± 30
mV
< ± 35
<±1
< ± 0.1
<7
DC .. 50
mV
mV/K
%/K
µs
kHz
- 10 .. + 80 °C
- 15 .. + 85 °C
70 g
Features
• Hall effect measuring principle
• Galvanic isolation between primary
and secondary circuit
• Isolation voltage 2500 V
• Low power consumption
• Extended measuring range (3 x IPN)
Advantages
• Easy mounting
• Small size and space saving
• Only one design for wide current
ratings range
• High immunity to external
interference.
Applications
• AC variable speed drives
• Static converters for DC motor drives
• Battery supplied applications
• Uninterruptible Power Supplies
(UPS)
• Switched Mode Power Supplies
(SMPS)
• Power supplies for welding
applications.
Notes : EN50178 approval pending
1) Derating is needed to avoid excessive core heating at high frequency.
010118/2
LEM Components
www.lem.com
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet HAC800-S.PDF ] |
Número de pieza | Descripción | Fabricantes |
HAC800-S | Current Transducers HAC 100 ~800-S | LEM |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |