DataSheet26.com

SCD5583 PDF даташит

Спецификация SCD5583 изготовлена ​​​​«Siemens Semiconductor» и имеет функцию, называемую «(SCD5580 - SCD5584) Serial Input Dot Addressable Intelligent Display».

Детали детали

Номер произв SCD5583
Описание (SCD5580 - SCD5584) Serial Input Dot Addressable Intelligent Display
Производители Siemens Semiconductor
логотип Siemens Semiconductor логотип 

15 Pages
scroll

No Preview Available !

SCD5583 Даташит, Описание, Даташиты
www.DataSheet4U.com
Slimline
STANDARD RED SCD5580
YELLOW SCD5581
HIGH EFFICIENCY RED SCD5582
GREEN SCD5583
HIGH EFFICIENCY GREEN SCD5584
.145” 8-Character 5x5 Dot Matrix
Serial Input Dot Addressable Intelligent Display
FEATURES
• Eight 0.145" (3.68 mm) 5x5 dot matrix char-
acters in red, yellow, high efficiency red,
green, or high efficiency green
• Optimum display surface efficiency
(display area to package ratio)
• Low power–30% less power dissipation
than 5x7 format
• High speed data input rate: 5 MHz
• ROMless serial input, dot addressable dis-
play–ideal for user defined characters
• Built-in decoders, multiplexers and LED
drivers
• Readable from 6 feet (1.8 meters)
• Wide viewing angle, X axis ±55°, Y axis ±65°
• Attributes
– 200 bit RAM for user defined characters
– Eight dimming levels
– Power down mode (<250 mW)
– Hardware/software clear function
– Lamp test
• Internal or external clock
• End-stackable dual-in-line plastic package
• 3.3 V capability
Package Dimensions in inches (mm)
0.145
(3.68)
1.500 max. (38.10)
.100
(2.54)
.187
(.47)
.050
(1.27)
typ.
.394 –.006
(10.0 –.15)
.012 (.30)
typ.
.300 –.020
(7.62 –.51)
1
Pin 1
Indicator
0.160 –.02
(4.06 –.51)
1.312 ref.
(33.32) EIA date code
0.200
(5.08)
Intensity Code
SCD-558X
SIEMENS YYWW
Z Y Hue Category
Seating Plane
.020 (.51) typ.
.100 –.010 typ.
(2.54 –.25)
Tol. non-cum. 1
1.300 ref.
(33.02)
1. Dimension is at Seating Plane
2. Display matrix and pins centered on package outline.
3. Display matrix centered to pin array.
4. Tolerance: .XXX = ± .010 (.25)
DESCRIPTION
The SCD5580 (Red), SCD5581 (Yellow), SCD5582 (HER), SCD5583
(Green) and SCD5584 (HEG) are eight digit dot addressable 5x5 matrix,
Serial Input, Intelligent Displays.
The eight 0.145" (3.68 mm) high digits are packaged in a rugged, high
quality optically transparent, standard 0.3" pin spacing 28 pin plastic
DIP.
The on-board CMOS has a 200 bit RAM, one bit associated with one
LED, each to generate User Defined Characters. Due to the reduced
LED count, power requirement and heat dissipation are reduced by
30%. Additionally in Power Down Mode quiescent current is <50 µA.
The SCD558X is designed to work with the Serial port of most common
microprocessors. The multiplex Clock I/O (CLK I/O) and multiplex Clock
Select (CLK SEL) pins offer the user the capability to supply a high
speed external multiplex clock. This feature can minimize audio in-band
interference for portable communication equipment or eliminate the
visual synchronization effects found in high vibration environments such
as avionic equipment
2–1









No Preview Available !

SCD5583 Даташит, Описание, Даташиты
Maximum Ratings
DC Supply Voltage ......................................................... –0.5 to +7.0 Vdc
Input Voltage Levels Relative
to Ground.................................................................–0.5 toVCC+0.5 Vdc
Operating Temperature .................................................. –40°C to +85°C
Storage Temperature ..................................................... –40°C to +100°C
Maximum Solder Temperature 0.063"
below Seating Plane, t<5 sec........................................................260°C
Relative Humidity at 85°C.................................................................. 85%
Maximum Number of LEDs on at 100% Brightness ............................128
Maximum Power Dissipation ......................................................1.7 Watts
IC Junction Temperature .................................................................125°C
ESD (100 pF, 1.5 K)......................................................................... 2 KV
Maximum Input Current .............................................................± 100 mA.
Figure 1a. Data write cycle
LOAD
DATA
SDCLK
TLDS
TDS
TDH
TSDCW
TSDCW
TSDCLK Period
TLDH
3.5 V
1.5 V
3.5 V
1.5 V
3.5 V
1.5 V
Switching Specifications (over operating
temperature range and VCC=4.5 V to 5.5 V)
Symbol Description
Min. Units
TRC Reset Active Time 600 ns
TLDS
Load SetupTime
50 ns
TDS
Data Setup Time
50 ns
TSDCLK Clock Period
200 ns
TSDCW Clock Width
70 ns
TLDH
Load Hold Time
0 ns
TDH Data Hold Time
25 ns
TWR Total Write Time
2.2 µs
TBL Time Between Loads 600 ns
Note: TSDCW is the minimum time the SDCLK may be
low or high. The SDCLK period must be a mini-
mum of 200 ns.
Figure 1b. Instruction cycle
TWR
LOAD
SDCLK
DATA
LOAD
SDCLK
DATA
D0 D1 D2 D3 D4 D5 D6 D7
OR
D0 D1 D2 D3 D4 D5 D6 D7
TBL
D0
D0
Figure 2. Maximum power dissipation vs. temperature
3.0
2.5
2.0
1.5 θJA=31°C/W
1.0
0.5
0.0
–40 –30 –20 –10 0
10 20 30 40 50 60 70 80 90 100 120 130 140
TA °C Ambient Temperature
SCD5580/5581/5582/5583/5584
2–2









No Preview Available !

SCD5583 Даташит, Описание, Даташиты
Electrical Characteristics (over Operating Temperature)
Parameter
Min. Typ. Max. Units Condition
VCC
ICC (Power Down Mode) (4)
ICC 8 digits, 16 dots/character
4.5 5.0 5.5 V
50 µA VCC=5 V, all inputs=0 V or VCC
200
290
mA
VCC=5 V, “#” displayed in all 8 digits at 100%
brightness at 25°C
IIL Input Current
–10 µA
VCC=5 V, VIN=0 V (all inputs)
IIH Input Current
+10 µA
VCC=VIN=5.0 V (all inputs)
VIH 3.5 V VCC=4.5 to 5 V
VIL
1.5 V
VCC=4.5 to 5 V
IOH (Clk I/O)
–8.9 mA VCC=4.5 V, VOH=2.4 V
IOL (Clk I/O)
1.6 mA VCC=4.5 V, VOH=0.4 V
θJC-PIN
31 °C/W
Fext External Clock Input Frequency
120
347 KHz VCC=5 V, CLKSEL=0
FOSC Internal Clock Input Frequency 120
347 KHz VCC=5 V, CLKSEL=1
Clock I/O Bus Loading
240 pF
Clock Out Rise Time
Clock Out Fall Time
FM, Digit
500 ns
500 ns
375 768 1086 Hz
VCC=4.5 V, VOH=2.4 V
VCC=4.5 V, VOH=2.4 V
Notes:
1. Peak current=53 X ICC.
2. Unused inputs must be tied high.
3. Contact Siemens for 3.3 volt operation.
4. External oscillator must be stopped if being used to maintain an ICC<50 µ
Input/Output Circuits
Figures 3 and 4 show the input and output resistor/diode networks used
for ESD protection and to eliminate substrate latch-up caused by input
voltage over/under shoot.A.
Figure 3. Inputs
Figure 4. Clock I/O
input
VCC
1 K
VCC
input/output
1 K
GND
GND
SCD5580/5581/5582/5583/5584
2–3










Скачать PDF:

[ SCD5583.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
SCD5580(SCD5580 - SCD5584) Serial Input Dot Addressable Intelligent DisplaySiemens Semiconductor
Siemens Semiconductor
SCD5580A(SCD5580A - SCD5584A) 8-Character 5 x 5 Dot Matrix Serial Input Dot Addressable Intelligent DisplayInfineon Technologies
Infineon Technologies
SCD5581(SCD5580 - SCD5584) Serial Input Dot Addressable Intelligent DisplaySiemens Semiconductor
Siemens Semiconductor
SCD5581A(SCD5580A - SCD5584A) 8-Character 5 x 5 Dot Matrix Serial Input Dot Addressable Intelligent DisplayInfineon Technologies
Infineon Technologies

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск