|
|
PDF NESG270034 Data sheet ( Hoja de datos )
| Número de pieza | NESG270034 | |
| Descripción | NPN SiGe RF TRANSISTOR | |
| Fabricantes | CEL | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NESG270034 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
NPN SILICON GERMANIUM RF TRANSISTOR
NESG270034
NPN SiGe RF TRANSISTOR FOR
MEDIUM OUTPUT POWER AMPLIFICATION (2 W)
3-PIN POWER MINIMOLD (34 PKG)
FEATURES
• This product is suitable for medium output power (2 W) amplification
Pout = 33.5 dBm TYP. @ VCE = 6 V, Pin = 20 dBm, f = 460 MHz
Pout = 31.5 dBm TYP. @ VCE = 6 V, Pin = 20 dBm, f = 900 MHz
• Using UHS2-HV process (SiGe technology), VCBO (ABSOLUTE MAXIMUM RATINGS) = 25 V
• 3-pin power minimold (34 PKG)
ORDERING INFORMATION
Part Number
NESG270034
Order Number
NESG270034-AZ
Package
Quantity
Supplying Form
3-pin power minimold 25 pcs
(34 PKG) (Pb-Free) Note1, (Non reel)
2
• Magazine case
NESG270034-T1 NESG270034-T1-AZ
1 kpcs/reel • 12 mm wide embossed taping
• Pin 2 (Emitter) face the perforation side of the tape
Notes 1. Contains Lead in the part except the electrode terminals.
2. With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact
your nearby sales office.
Remark To order evaluation samples, contact your nearby sales office.
Unit sample quantity is 25 pcs.
ABSOLUTE MAXIMUM RATINGS (TA = +25°C)
Parameter
Symbol
Ratings
Collector to Base Voltage
VCBO
25
Collector to Emitter Voltage
VCEO
9.2
Emitter to Base Voltage
VEBO
2.8
Collector Current
Total Power Dissipation
IC
Ptot Note
750
1.9
Junction Temperature
Storage Temperature
Tj 150
Tstg −65 to +150
Note Mounted on 34.2 cm2 × 0.8 mm (t) glass epoxy PWB
Unit
V
V
V
mA
W
°C
°C
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
Document No. PU10577EJ01V0DS (1st edition)
Date Published September 2005 CP(K)
© NEC Compound Semiconductor Devices, Ltd. 2005
1 page  
NESG270034
S-PARAMETERS
S-parameters/Noise parameters are provided on the NEC Compound Semiconductor Devices Web site in a form
(S2P) that enables direct import to a microwave circuit simulator without keyboard input.
Click here to download S-parameters.
[RF and Microwave] → [Device Parameters]
URL http://www.ncsd.necel.com/
PA EVALUATION CIRCUIT TYPICAL CHARACTERISTICS
OUTPUT POWER, COLLECTOR
CURRENT, COLLECTOR EFFICIENCY
vs. INPUT POWER
35
VCE = 6 V, f = 460 MHz
IC (set) = 30 mA
30
1 000
800
Pout
25 600
20 400
IC
15
200
ηC
10 0
0 5 10 15 20 25
Input Power Pin (dBm)
Remark The graph indicates nominal characteristics.
Preliminary Data Sheet PU10577EJ01V0DS
5
5 Page 
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Lead (Pb)
Mercury
Cadmium
Hexavalent Chromium
PBB
PBDE
Concentration Limit per RoHS
(values are not yet fixed)
< 1000 PPM
< 1000 PPM
< 100 PPM
< 1000 PPM
< 1000 PPM
< 1000 PPM
Concentration contained
in CEL devices
-A
Not Detected
-AZ
(*)
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet NESG270034.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NESG270034 | NPN SiGe RF TRANSISTOR | CEL |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |