DataSheet26.com

9440 PDF даташит

Спецификация 9440 изготовлена ​​​​«General Electric Company» и имеет функцию, называемую «INDUSTRIAL».

Детали детали

Номер произв 9440
Описание INDUSTRIAL
Производители General Electric Company
логотип General Electric Company логотип 

1 Pages
scroll

No Preview Available !

9440 Даташит, Описание, Даташиты
g
www.DataSheet4U.com
GE Structured Products
LEXAN® 9440 SHEET
Product Data Sheet
INDUSTRIAL
DESCRIPTION
LEXAN® 9440 uncoated polycarbonate sheet is designed to meet the requirements of specialty
applications as food handling/contact. LEXAN 9440 sheet complies with FDA food additive regulations (21 CFR
177.1580). LEXAN 9440 sheet offers high impact protection, thermoformability, transparency, and dimensional
stability.
TYPICAL PROPERTY VALUES*
Property
Test
Method
Units
Value
PHYSICAL
Specific Gravity
Light Transmission (Average), 1/8" disk
Water Absorption, Equilibrium, 24 hrs
@ 73°F
@ 212°F
ASTM D792
ASTM D1003
ASTM D570
—
%
%
1.20
88
0.15
0.35
0.58
MECHANICAL
Tensile Strength
@ Yield
Ultimate
Tensile Modulus
Flexural Strength
Flexural Modulus
Compressive Strength
Compressive Modulus
Elongation
Izod Impact Strength
Notched @ 1/8"
Unnotched @ 1/8"
ASTM D638
ASTM D638
ASTM D790
ASTM D790
ASTM D695
ASTM D695
ASTM D638
ASTM D256A
psi
psi
psi
psi
psi
psi
%
ft-lbs/in
9,000
9,500
345,000
13,500
345,000
12,500
345,000
110
12–16
60 (no failure)
THERMAL
Coefficient of Thermal Expansion
Thermal Conductivity
Heat Deflection Temperature
@ 264 psi
@ 66 psi
ASTM D696
ASTM C177
ASTM D648
in/in/°F
Btu/hr•ft2•°F•in
°F
3.75 x 10-5
1.35
270
280
LEXAN is a registered trademark of General Electric Company
*These are typical properties and are not intended for specification purposes. If minimum certifiable properties are required,
please contact your local GE Plastics Structured Products representative or the GE Plastics Structured Products Quality Services
Department.
DISCLAIMER: THE MATERIALS AND PRODUCTS OF THE BUSINESSES MAKING UP THE GE PLASTICS UNIT OF GENERAL ELECTRIC COMPANY, ITS SUBSIDIARIES AND
AFFILIATES, (“GEP”) ARE SOLD SUBJECT TO GEP’S STANDARD CONDITIONS OF SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES
AGREEMENT, PRINTED ON THE BACK OF ORDER ACKNOWLEDGMENTS AND INVOICES, AND AVAILABLE UPON REQUEST. ALTHOUGH ANY INFORMATION, RECOMMENDA-
TIONS, OR ADVICE CONTAINED HEREIN IS GIVEN IN GOOD FAITH, GEP MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT THE RESULTS DESCRIBED
HEREIN WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO THE EFFECTIVENESS OR SAFETY OF ANY DESIGN INCORPORATING GEP MATERIALS, PRODUCTS,
RECOMMENDATIONS OR ADVICE. EXCEPT AS PROVIDED IN GEP’S STANDARD CONDITIONS OF SALE, GEP AND ITS REPRESENTATIVES SHALL IN NO EVENT BE
RESPONSIBLE FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS OR PRODUCTS DESCRIBED HEREIN. EACH USER BEARS FULL RESPONSIBILITY FOR MAKING
ITS OWN DETERMINATION AS TO THE SUITABILITY OF GEP’S MATERIALS, PRODUCTS, RECOMMENDATIONS, OR ADVICE FOR ITS OWN PARTICULAR USE. EACH USER
MUST IDENTIFY AND PERFORM ALL TESTS AND ANALYSES NECESSARY TO ASSURE THAT ITS FINISHED PARTS INCORPORATING GEP MATERIALS OR PRODUCTS WILL BE
SAFE AND SUITABLE FOR USE UNDER END-USE CONDITIONS. Nothing in this or any other document, nor any oral recommendation or advice, shall be deemed to alter, vary, supersede, or
waive any provision of GEP’s Standard Conditions of Sale or this Disclaimer, unless any such modification is specifically agreed to in a writing signed by GEP. No statement contained herein
concerning a possible or suggested use of any material, product or design is intended, or should be construed, to grant any license under any patent or other intellectual property right of General Electric
Company or any of its subsidiaries or affiliates covering such use or design, or as a recommendation for the use of such material, product or design in the infringement of any patent or other intellectual
property right.
g
General Electric Company
One Plastics Avenue,
Pittsfield, MA 01201-3697
SPD-4307A (3/03) GE
GE Structured Products
For more information call: (800) 451-3147
www.gestructuredproducts.com










Скачать PDF:

[ 9440.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
9440INDUSTRIALGeneral Electric Company
General Electric Company
944PCRTL Micrologic and CTL Counting Micrologic ElementsFairchild Semiconductor
Fairchild Semiconductor

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск