DataSheet26.com

7B30 PDF даташит

Спецификация 7B30 изготовлена ​​​​«Analog Devices» и имеет функцию, называемую «Voltage or Current Input».

Детали детали

Номер произв 7B30
Описание Voltage or Current Input
Производители Analog Devices
логотип Analog Devices логотип 

8 Pages
scroll

No Preview Available !

7B30 Даташит, Описание, Даташиты
Isolated, Voltage or Current Input
7B30
FEATURES
Interfaces, amplifies and filters unipolar and bipolar millivolt
and voltage inputs.
Provides a protected precision output of either +1 V to +5 V
or 0 V to +10 V.
A plug-in 250W current sensing resistor is provided to
measure a process current input.
All 7B30 series modules are mix-and-match and Hot
Swappable.
FUNCTIONAL BLOCK DIAGRAM
APPLICATIONS
Industrial signal conditioning
Industrial signal isolation
Industrial signal filtering
PRODUCT OVERVIEW
Figure 1. 7B30 Functional Block Diagram
The modules feature a maximum nonlinearity of +0.02% and
are factory calibrated to guarantee a maximum accuracy
specification of +0.1%.
The 7B Series of signal conditioners feature small size, low cost
The 7B Series offers up to 1500 V rms continuous common
and a wide output voltage range for a variety of applications
mode voltage isolation and 120 V rms of field wiring input
including process control and factory-floor environments. The
protection. The power supplies necessary to drive each of the
single-channel 7B modules accept inputs from a range of
individual module’s input circuitry are internally isolated,
www.DataSheet4U.com
transducers and are fully rated over the extended -40oC to
enabling the 7B Series modules to offer true channel-to-channel
+85oC industrial temperature range. All 7B Series modules are
isolation of the input signals.
rated for a nominal power supply input of +24 VDC; and, for
maximum flexibility, they will accept supply voltages in the +14
VDC to +35 VDC range. The input modules, with the exception
of the 7B21, provide a high-level output voltage that is factory
configured for either the +1 V to +5 V or 0 V to +10 V range.
The 7B21 is a unity gain, isolated input module with an
input/output range of +10V. Output modules are available that
provide either isolated process current or isolated bipolar
voltage output. Model 7B39 converts either a +1 V to +5 V input
to a 4 to 20 mA output or a 0 V to +10 V input to a 0-20 mA
output. The input/output ranges of the 7B39 are factory
configured. The 7B22 is a unity gain module that provides an
isolated +10V output signal. All modules have a universal pin-
out and may be readily hot-swapped under full power without
disrupting field wiring. Each module accepts analog transducer
signals and transfers them to a process control or factory data
collection system without the inherent noise, non-linearity, drift
The modules directly accept analog signals from
thermocouples, RTDs, current loop powered transmitters, and
other process control signals. The 7B Series modules amplify,
linearize, isolate, protect and convert the transducer output
signals to standardized analog inputs for high-level analog I/O
subsystems. The 7B Series Subsystem consists of 19-inch rack-
compatible hardware (model AC 1363), with universal
mounting backplane and a family of plug-in (up to 16 per
backplane) input and output signal conditioning modules. Four-
, eight-, and sixteen-channel backplanes are available. Each
backplane incorporates screw terminals for easy power
connections and field wiring, and includes a 25-pin D-type
connector for interfacing the high-level single-ended voltage
outputs to the user’s equipment. Gold-plated sockets are
provided on each channel of the backplane to ensure the
reliability of each module’s electrical connection.
and extraneous voltages which frequently accompany the
signals.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.326.8703 © 2004 Analog Devices, Inc. All rights reserved.









No Preview Available !

7B30 Даташит, Описание, Даташиты
GENERAL DESCRIPTION
The 7B30 is a single-channel signal conditioning module that
interfaces, amplifies and filters unipolar and bipolar milli-vilt
and voltage inputs and provides a protected precision output of
either +1 V to +5 V or 0V to +10 V.
To measure a process current input, a plug-in 250W current
sensing resistor, Model AC1391, may be installed directly on the
7B backplane, using available pin sockets. The external current
sense resistor allows the current loop to be maintained even
when the module is removed from the backplane. Model 7B30
features a nonlinearity of +0.02% maximum and an accuracy of
+0.1% maximum (+0.01% typical). To accurately measure low
level signals in electrically noisy environments, 1500 V rms of
galvanic transformer-based isolation with a common mode
rejection (CMR) of 160 dB @ 50/60 Hz and a normal mode
rejection (NMR) of 60 dB @ 50/60 Hz are provided. Rated to
operate with a nominal +24 VDC supply, Model 7B30 is nix-
and-match and hot-swappable with other 7B Series input
modules, so it can be inserted or removed from any socket in
the same backplane without disturbing system power.
The floating differential input of Model 7B30 is fully protected
7B30
up to 120 V rms line voltage. A one-pole 3 Hz filter
preconditions the input signal prior to amplification by a low
drift input amplifier. Amplitude modulation is used to
implement transformer isolation (1500 V rms input-t-output
and power). Isolated front-end circuitry power is supplied by a
DC/DC converter. The output section contains a two-pole
output filter and subsequent buffer ensures that a low noise, low
impedance (<1) signal is available at the output to drive loads
of 2 kminimum.
Figure 2
Rev. 0 | Page 2 of 8









No Preview Available !

7B30 Даташит, Описание, Даташиты
7B30 Models Available
7B30
7B30-01-1
7B30-01-2
7B30-02-1
7B30-02-2
7B30-03-1
7B30-03-2
7B30-05-1
7B30-05-1
7B30-05-2
7B30-05-2
7B30-06-1
7B30-06-2
7B30-07-1
7B30-07-2
7B30-08-1
7B30-08-2
Model
0 mV to +10 mV
0 mV to +10 mV
0 mV to +100 mV
0 mV to +100 mV
0 V to +1 V
0 V to +1 V
+1 V to +5 V
+4 mA to +20 mA1
+1 V to +5 V
0 mA to +20 mA1
-10 mV to +10 mV
-10 mV to +10 mV
-100 mV to +100 mV
-100 mV to +100 mV
-1 V to +1 V
-1 V to +1 V
Input Range
+1 V to +5 V
0 V to +10 V
+1 V to +5 V
0 V to +10 V
+1 V to +5 V
0 V to +10 V
+1 V to +5 V
+1 V to +5 V
0 V to +10 V
0 V to +10 V
+1 V to +5 V
0 V to +10 V
+1 V to +5 V
0 V to +10 V
+1 V to +5 V
0 V to +10 V
Output Range
1Models 7B30-05-1 and 7B30-05-2 may be used to measure a process current input by installing a 250 current sensing resistor, such as Model AC1391, on the backplane. With
this resistor installed, the current loop is maintained even when the module is removed from the backplane.
7B30 Specifications
(typical @ +23°C ±5°C and Vs = +24 V dc)
Description
Standard Range
Custom Ranges
Output Range Options (RL > 2 k)
Initial @ +25°C
Nonlinearity3
Input Offset vs. Temperature
Zero Suppression vs. Temperature
Span vs. Temperature
Output Offset vs. Temperature
Range1
Model 7B30
±10 mV to ±1 V (Refer to Model Table)
Not Available*
+1 V to +5 V or 0 V to +10 V
Accuracy2
±0.01% Span (±0.1% Span, maximum)
±0.02% Span, maximum
±0.5 µV/°C
±0.005% (Vz)4/°C
±35 ppm/°C
±0.002% Span/°C
Rev. 0 | Page 3 of 8










Скачать PDF:

[ 7B30.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
7B30Voltage or Current InputAnalog Devices
Analog Devices
7B31Isolated Voltage InputAnalog Devices
Analog Devices
7B33Voltage or Current InputAnalog Devices
Analog Devices
7B34Linearized RTD InputAnalog Devices
Analog Devices

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск