|
|
Datasheet SA571 Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | SA571 | Compandor INTEGRATED CIRCUITS
SA571 Compandor
Product specification IC17 Data Handbook 1997 Aug 14
Philips Semiconductors
Philips Semiconductors
Product specification
Compandor
SA571
DESCRIPTION
The SA571 is a versatile low cost dual gain control circuit in which either channel may be used as a dynamic |  Philips | data |
| 2 | SA571 | Compandor SA571 Compandor
The SA571 is a versatile low cost dual gain control circuit in which either channel may be used as a dynamic range compressor or expandor. Each channel has a full−wave rectifier to detect the average value of the signal, a linerarized temperature−compensated variable gain cell, a |  ON Semiconductor | data |
| 3 | SA571D | Compandor INTEGRATED CIRCUITS
SA571 Compandor
Product specification IC17 Data Handbook 1997 Aug 14
Philips Semiconductors
Philips Semiconductors
Product specification
Compandor
SA571
DESCRIPTION
The SA571 is a versatile low cost dual gain control circuit in which either channel may be used as a dynamic | Philips | data |
| 4 | SA571N | Compandor INTEGRATED CIRCUITS
SA571 Compandor
Product specification IC17 Data Handbook 1997 Aug 14
Philips Semiconductors
Philips Semiconductors
Product specification
Compandor
SA571
DESCRIPTION
The SA571 is a versatile low cost dual gain control circuit in which either channel may be used as a dynamic | Philips | data |
SA5 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | SA5.0 | TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR Dc Components tvs-diode | | |
| 2 | SA5.0 | GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power) SA5.0 THRU SA170CA
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power
FEATURES l l l l l l l Plastic package has Underwriters Laboratory Flammability Classification 94V-O Glass passivated chip junction 500W Peak Pulse Power capability on 10/10  Pan Jit International tvs-diode | | |
| 3 | SA5.0 | 500W TRANSIENT VOLTAGE SUPPRESSORS Won-Top Electronics tvs-diode | | |
| 4 | SA5.0 | TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR SA5.0 THRU SA170CA
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Stand-off Voltage - 5.0 to 170 Volts
DO-204AC
Peak Pulse Power - 500 Watts
FEATURES
0.034 (0.86) 1.0 (25.4) MIN. 0.028 (0.71) DIA.
0.300 (7.6) 0.230 (5.8)
0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN.
♦ Plastic package has Underwrite  General Semiconductor tvs-diode | | |
| 5 | SA5.0 | 500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS SA5.0
THRU
SA180CA
500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS
VOLTAGE RANGE
5.0 to 180 Volts
FEATURES
* 500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1�  Bytes tvs-diode | | |
| 6 | SA5.0 | Diode TVS (Transient Voltage Suppressor) SA5.0 - SA170A
VBR : 6.8 - 200 Volts PPK : 500 Watts
FEATURES :
* 500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1µA above 10V
TRANSIENT VOLTAGE SUPPRESSOR
DO - 41
 EIC discrete tvs-diode | | |
| 7 | SA5.0 | Transient Voltage Suppressor Diodes SA SERIES
Features
Transient Voltage Suppressor Diodes
Voltage Range 5.0 to 170 Volts 500 Watts Peak Power 1.0 Watt Steady State
DO-15
Plastic package has Underwriters Laboratory Flammability Classification 94V-0 500W surge capability at 10 X 10us waveform, duty cycle: 0.01% Excellent clamping ca  Taiwan Semiconductor diode | |
| Esta página es del resultado de búsqueda del SA571. Si pulsa el resultado de búsqueda de SA571 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |