OPF510 PDF даташит
Спецификация OPF510 изготовлена «OPTEK Technologies» и имеет функцию, называемую «(OPF500 / OPF510) 200kbps Fiber Optic Receiver». |
|
Детали детали
Номер произв | OPF510 |
Описание | (OPF500 / OPF510) 200kbps Fiber Optic Receiver |
Производители | OPTEK Technologies |
логотип |
4 Pages
No Preview Available ! |
Product Bulletin OPF500
February 1996
200kbps Fiber Optic Receiver
Type OPF500, OPF510 Series
Features
• Interfaces with all logic circuits
• Two output options
• Optimized for fiber optic applications
www.DataSheet4U.com using 50 to 200 micron fiber
• Data rate to 200kbps NRZ
• Available with multiple packaging
options
Description
The OPF500, OPF510 series receiver
contains a monolithic integrated circuit
which incorporates a photodiode, a linear
amplifier, a voltage regulator, and a
Schmitt trigger on a single silicon chip.
These receivers are designed for short
haul fiber optic systems using 850 nm
LED’s such as Optek’s OPF300 series.
These devices feature TTL\LSTTL
compatible logic level output. An internal
voltage regulator allows operation with
supply voltages ranging from 4.5V to
16V.
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65o C to +100o C
Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40o C to +85o C
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering
iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240o C
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mW
Duration of Output Short to VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 sec.
Voltage at Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Sinking Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 mA
Schematics
Buffer/10K PU
VCC
OUT
Inverter/10K PU
GND
VCC
OUT
Optek Technology, Inc.
1215 W. Crosby Road
GND
Carrollton, Texas 75006 (972) 323-2200
8-92
Fax (972) 323-2396
No Preview Available ! |
Type OPF500, OPF510 Series
Electrical Characteristics (-40o C to +85o C unless otherwise noted)
SYMBOL
PARAMETER
VCC Operating Supply Voltage
PIN Input Sensitivity (OPF5X0,1,2)
PIN Input Sensitivity (OPF5X5,6,7)
High Level Output Voltage
VOH Buffer 10K Pull-up
Inverter 10K Pull-up
Low Level Output Voltage
Buffer, 10K Pull-up
VOL Buffer Open-collector
Inverter, 10K Pull-up
Inverter Open-collector
ICC Supply Current
BW Bandwidth
Pulse With Distortion
PWD
tr Buffer
tf
tr Inverter
tf
MIN TYP MAX UNITS
TEST CONDITIONS
4.5 16.0 V
1.0 1.5 µW 50% Duty Cycle Square Wave
1.5 2.0 µW 50% Duty Cycle Square Wave
VCC -1.5
V PIN > 2.0 µW, VCC = 4.5 V to 16 V
VCC -1.5
V PIN < 0.1 µW, VCC = 4.5 V to 16 V
PIN < 0.1 µW, VCC = 4.5 V to 16 V
0.4 V
0.4 V PIN > 2.0 µW, VCC = 4.5 V to 16 V
5.0 12.0 mA VCC = 4.5 V to 16 V, No load on output
200 kHz PIN > 2.0 µW, 50% Duty Cycle
10 % 1 µW < PIN < 100 µW,
f = 20 kHz, D.C. = 50%
300 ns PIN = 1.5 µW, VCC = 5 V
100 ns
100 ns PIN = 1.5 µW, VCC = 5 V
300 ns
PART NUMBER GUIDE
OPF5XX
Optek Fiber Optic Component
Receiver
0 - Plastic TO-18 Hsg.
1 - Plastic TO-18 in SMA
2 - Plastic TO-18 in ST*
5 - Metal TO-46 Hsg.
6 - Metal TO-46 in SMA
7 - Metal TO-46 in ST
*ST is a registered trade mark of AT&T.
0 - 200kbps, 10K Pull-up buffer (non-inverting) output
1 - 200kbps, 10K Pull-up inverting output
Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 (972) 323-2200
Fax (972) 323-2396
8-93
No Preview Available ! |
Type OPF500, OPF510 Series
Typical Performance Curves
High Level Output Voltage vs
Ambient Temperature
VCC = 16 V
IOH = 100 µA
VOH
High Level Output Current vs
Ambient Temperature
VCC = 16 V
VOH = 30 V
IOH
TA - Ambient Temperature - oC
TA - Ambient Temperature - oC
Low Level Output Voltage vs
Ambient Temperature
VOL
VCC = 4.5 V
IOL = 16 mA
TA - Ambient Temperature - oC
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
8-94
(972) 323-2200
Fax (972) 323-2396
Скачать PDF:
[ OPF510.PDF Даташит ]
Номер в каталоге | Описание | Производители |
OPF510 | (OPF500 / OPF510) 200kbps Fiber Optic Receiver | OPTEK Technologies |
OPF511 | (OPF500 / OPF510) 200kbps Fiber Optic Receiver | OPTEK Technologies |
OPF512 | (OPF500 / OPF510) 200kbps Fiber Optic Receiver | OPTEK Technologies |
OPF515 | (OPF500 / OPF510) 200kbps Fiber Optic Receiver | OPTEK Technologies |
Номер в каталоге | Описание | Производители |
TL431 | 100 мА, регулируемый прецизионный шунтирующий регулятор |
Unisonic Technologies |
IRF840 | 8 А, 500 В, N-канальный МОП-транзистор |
Vishay |
LM317 | Линейный стабилизатор напряжения, 1,5 А |
STMicroelectronics |
DataSheet26.com | 2020 | Контакты | Поиск |