|
|
PDF NR4270MU-CC Data sheet ( Hoja de datos )
| Número de pieza | NR4270MU-CC | |
| Descripción | SUPERLATTICE APD MODULE | |
| Fabricantes | CEL | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NR4270MU-CC (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
NEC's SUPERLATTICE
APD MODULE
WITH INTERNAL PREAMPLIFIER
FOR 10 Gb/s APPLICATIONS
NR4270MU-CC
FEATURES
• SUPERLATTICE AVALANCHE PHOTO DIODE
• INTERNAL GaAs TRANSIMPEDANCE PREAMPLIFIER
• RECEIVER FOR 10 Gb/s TRANSMISSION
(STM-4, OC-192)
• MINIMUM RECEIVER SENSITIVITY
Pr = -24 dBm MAX
• TRANSIMPEDANCE
Zt = 60 dB Ω MIN
• 17-PIN MINI-BUTTERFLY PACKAGE WITH SINGLE
MODE FIBER
• AC COUPLED-DIFFERENTIAL OUTPUT
• WITH SC-UPC CONNECTOR
DESCRIPTION
NEC'S NR4270MU-CC is a 10 Gb/s superlattice avalanche
photo diode (APD) receiver in a 17-pin mini-butterfly package
with an internal preamplifier. This module is ideal as a receiver
for SONET OC-192 and Synchronous Digital Hierarchy (SDH)
systems, STM-64, and ITU-T recommendations.
ELECTRO-OPTICAL CHARACTERISTICS (TC = 25°C, VSS = -5.2 V, λ = 1550 nm, unless otherwise specified)
PART NUMBER
NR4270MU-CC
SYMBOLS
VBR
δ1
ID
S
Pr
PO
fc
S22
Zt
PD
ORL
Rth
PARAMETERS AND CONDITIONS
Reverse Breakdown Voltage, ID = 10 µA
Temperature Coefficient of Reverse Breakdown Voltage,
TC = 0 to +70°C
Dark Current, VR = VBR X 0.9
Sensitivity,
M=1
Minimum Receiver Sensitivity, PRBS = 231–1, M = Mopt
10 Gb/s, NRZ,
Overload,
BER = 10-12 M = 3
Cut-off Frequency, RL = 50 Ω, M = 9, PIN = -20 dBm
RF OutputReturn Loss,
to 6 GHz
6 to 8 GHz
Transimpedance, RL = 50 Ω
IC Power Dissipation
Optical Return Loss
Thermistor Resistance
UNITS
V
mV/°C
µA
A/W
dBm
dBm
GHz
dB
dB
dBΩ
mW
dB
kΩ
Note:
1. δ =
∆VBR
∆Tc
MIN
16
5
–
0.63
–
-8
7.0
–
–
60
–
–
9.5
TYP
–
–
–
–
-25
-7
8.0
–
–
–
500
–
10
MAX
32
40
1.2
–
-24
–
–
10
8
–
600
27
10.5
California Eastern Laboratories
1 page  
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Lead (Pb)
Mercury
Cadmium
Hexavalent Chromium
PBB
PBDE
Concentration Limit per RoHS
(values are not yet fixed)
< 1000 PPM
< 1000 PPM
< 100 PPM
< 1000 PPM
< 1000 PPM
< 1000 PPM
Concentration contained
in CEL devices
-A
Not Detected
-AZ
(*)
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet NR4270MU-CC.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NR4270MU-CC | SUPERLATTICE APD MODULE | CEL |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |