DataSheet26.com

CCM02-2763 PDF даташит

Спецификация CCM02-2763 изготовлена ​​​​«ITT Industries» и имеет функцию, называемую «(CCM02-2xxx) Connector».

Детали детали

Номер произв CCM02-2763
Описание (CCM02-2xxx) Connector
Производители ITT Industries
логотип ITT Industries логотип 

2 Pages
scroll

No Preview Available !

CCM02-2763 Даташит, Описание, Даташиты
www.DataSheet4U.com
CCM02 MK II
EMVTM compatible
The CCM02 MK II connectors with
landing contacts are dedicated for
applications where the reader usage is
high and the life span of the card is a
key consideration. A connector with
contacts which land on the card, rather
than slide over it, should be specified so
as to minimize card wear. The CCM02
has been redesigned to give an even
higher performance in a compact,
affordable package.
Features
• 500,000 card insertion cycles.
• The contacts do not touch the card
until it is almost fully inserted – A
minimal wiping action removes any
non-conductive material.
• The connector has been designed to
give a positive indication once the
card has been fully inserted.
• The reduced size of the contact base
saves PCB space, making the
connector more stable during surface
mounting, and creates an air gap
between the contacts and card entry
slot, which reduces the risk of an
electrostatic transfer to the PCB.
• For added reliability, the integrated card
end-travel switch, which is normally
open, is sealed against dust and grit.
• By using an inlay finish in the contact
area, the life of the precious metal is
extended by more than 10 times that
of standard gold plating.
• The contact area is spooned to reduce
the risk of accidental (or deliberate)
damage and to optimize the electrical
connection with the card.
• Snap-locks underneath the molding
position and hold the connector on
the PCB, and give additional support
to the contact terminals.
• The plastic moldings are made from a
high temperature thermoplastic suited
for infrared and convection soldering
processes.
EMVTM is a trademark owned by EMVCoLLC.
Construction
Contacts
Plating
Moldings
Spring
Card detection switch actuator
Copper alloy
Contact area : Gold alloy inlay
Terminals: Tin lead (2µ min)
High temp. thermoplastic UL 94V-0 rated
Stainless steel
Stainless steel
Mechanical Data
Number of Contacts
Mechanical life
Card insertion force
Card extraction force
Contact force
Card detection switch
actuation force
Vibration
Shock
Contact Electrical Data
Insulation resistance
Resistance
Current rating
Dielectric strength
8
500,000 cycles min
10 N max
1 N min / 10 N max
0.25 N min / 0.5 N max
0.8 N max for actuation (end travel switch
actuates when card is 1,0 mm from
card stop) 1.8 N max for complete depression
Frequency 10 to 500 Hz. Acceleration 50m/s2
Duration 6 hours - amplitude 0,35 mm
Max electrical discontinuity 1µs
Peak value 500 m/s2 – Duration 11 ms
3 shocks in each direction of each axis
Max electrical discontinuity 1 µs
1,000 Mmin
100 mmax
10 µA min / 1 A max
750 Vrms min
Switch Electrical Data
Card detection switch
Contact resistance
Dielectric strength
Current rating
Maximum power
Environmental Data
Normally open
100 mmax
250 Vrms min
1 mA min / 10 mA max
0.2 VA
Operating temperature
Soldering temperature
Damp heat
Salt mist
Card detection switch
-40°C to +85°C
Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature 250°C
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
Sealed IP 54
Ordering Code
Part Number
CCM02-2503
CCM02-2504
CCM02-2508
CCM02-2511
CCM02-2512
CCM02-2758
CCM02-2763
CCM02-2765
CCM02-2766
Number of
Contacts
8
8
8
8
8
8
8
8
8
Termination
Tails Design
Through Hole
SMT
SMT
Through Hole
SMT
SMT
SMT
Through Hole
SMT
PCB
Locating
4 Board Lock (PCB 1.6 mm thick)
4 Board Lock (PCB 1.6 mm thick)
2 Pegs
4 Pegs
4 Pegs
2 Pegs (without cover)
4 Board Lock + 2 Pegs
4 Board Lock (PCB 1mm thick)
4 Board Lock (PCB 1mm thick)
Packaging
Multiple
300
300
300
300
300
300
300
300
300
Packaging
30 per tray, 10 trays per box.
15
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com









No Preview Available !

CCM02-2763 Даташит, Описание, Даташиты
CCM02 MK II
Dimensional Drawings
CCM02-2504 (8 contacts SMT - 4 board lock)
0,65
1,8
55,6 ±0,2
54,3
Embossed
Channel
DETAIL A
4 Snap
Feet
A
19,12 5x 2,54
4x
ø0,2 A B
52
Designation & Date-Code area
"CCM02" marking is optional
A
CCM022- 504
XXXX
SEE DETAIL A
0,2±0,15
COUPE A-A
5,75
50 (REF.)
Card stop
38,5 (REF.)
10x
0,3 A
A
1
Pick and place area
ø13
Card insertion
direction
4,15±0,3 Card entry
PCB Layout
Plastic outline
Contact foot area
0,8 x 1
Pad
10
14
20
1,8
Contact location according to
ISO 7816-2
CCM02-2504 (8 contacts SMT - 4 board lock)
(Component side)
SW SW
C1 C2 C3 C4
Card end travel
switch terminals
0,8 x 1
Drawings shown for reference only. For other part
numbers please consult your local Cannon
Customer Service Center.
C5 C6 C7 C8
10x
1,3 0,2
4x
ø0,1
ø
3,2
+0,1
0
Unless otherwise stated, tolerances are ± 0,10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
16










Скачать PDF:

[ CCM02-2763.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
CCM02-2763(CCM02-2xxx) ConnectorITT Industries
ITT Industries
CCM02-2765(CCM02-2xxx) ConnectorITT Industries
ITT Industries
CCM02-2766(CCM02-2xxx) ConnectorITT Industries
ITT Industries

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск