DataSheet26.com

OSC-2A1 PDF даташит

Спецификация OSC-2A1 изготовлена ​​​​«Vectron International» и имеет функцию, называемую «(OSC-Series) Ultra Miniature TCXO».

Детали детали

Номер произв OSC-2A1
Описание (OSC-Series) Ultra Miniature TCXO
Производители Vectron International
логотип Vectron International логотип 

4 Pages
scroll

No Preview Available !

OSC-2A1 Даташит, Описание, Даташиты
www.DataSheet4U.com
Product Data Sheet
OSC Series
Ultra Miniature TCXO s
Features
Low Cost
3.0 or 5.0 Vdc Option
Reflow Solderable
<2.2 mm Height
Voltage Tune Option
Applications
Wireless handsets, PCS, GSM, Cellular
PCMCIA Applications
GPS
Description
Vectron International has introduced a series of low-pro-
file, low cost, surface mount, Temperature Compensated
Crystal Oscillators (TCXOs) available in frequencies
from 10 MHz to 50 MHz.
The OSC series low-profile (0.09 inch maximum height),
surface mount TCXOs can be mounted using the stan-
dard convection reflow process. The units feature a
PPM frequency vs. temperature characteristic over a
to operating range and operate from a
3.0V or 5V supply. Current drain <2.0 mA. Aging
<1ppm/year and phase noise is -125 dBc/Hz at 100 Hz
and -150 dbc/Hz at 100 kHz.
The OSC series of TCXOs and TCVCXOs has been
designed for pick-and-place mounting and reflow sol-
dering. Units are available on tape-and-reel at no addi-
tional charge. The reel size is 2000 pcs. and is compati-
ble with EIAJ-1009B standards. The low-cost, miniature
units are ideal for wireless handsets, PCMCIA applica-
tions, and GPS receivers.









No Preview Available !

OSC-2A1 Даташит, Описание, Даташиты
OSC Series Ultra Miniature TCXO s
Performance Characteristics
Parameter
Characteristics
Option A = +5 Vdc
Option B= +3 Vdc
Frequency range:
10 MHz to 50 MHz
www.DataSheet4U.com
Stability Options:
(relative to
1 = ppm -20 to
2 = ppm -30 to
3 = ppm -30 to
4 = ppm -40 to
Stability vs. Supply
Aging (typical):
ppm vs B+ of
< 1.0 ppm/year at
Input Voltage:
+5.0 Vdc
+3.0 Vdc
Current:
<1.5 mA (10.0 to 16.8 MHz) <2.0 mA (16.8 to 20.0 MHz)
<3.0 mA (20.1 to 35.0 MHz) <4.0 mA (35.1 to 50.0 MHz)
Output:
Clipped Sinewave
+5.0 Vdc = 1.0 VP-P minimum
+3.0 Vdc = 0.7 VP-P minimum
Load:
10 K /10pf
Mechanical trim:
Trim options:
PPM min. *Need a trim tool
0 = Mechanical trim, no VCO
1 = ppm VC & mechanical
2 = Voltage trim only
ppm min.
Voltage Control
Input Impedence:
100K minimum
Supply Voltage:
+5.0 Vdc
+3.0 Vdc
Control Voltage Range:
+0.5Vdc to +4.5Vdc
+0.5Vdc to +2.5Vdc
Frequency Tolerance at
Start-up time:
Harmonics:
2nd harmonic
3rd harmonic
Other
Phase Noise (typical):
at 10 MHz
ppm at +2.5 Vdc
ppm at +1.5 Vdc
<10 mS (typical) to within
PPM
> 3 dBc down
> 6 dBc down
> 10 dBc down
-80 dBc/Hz max. at 10 Hz offset
-125 dBc/Hz max. at 100 Hz offset
-145 dBc/Hz max. at 1 KHz offset
-148 dBc/Hz max. at 10 KHz offset
-150 dBc/Hz max. at 100 KHz offset
Vectron International 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 Fax: 1-888-FAX-VECTRON
2









No Preview Available !

OSC-2A1 Даташит, Описание, Даташиты
OSC Series Ultra Miniature TCXO s
0.39
(9.9)
max
32
0.47
(11.8)
max
www.DataSheet4U.com
4
1
Frequency
adjust
access
0.09
(2.2)
max
0.020
(0.5)
Terminal #1
identifier
0.055 (1.4)
2 places
0.050 (1.3)
4 places
4
0.300
(7.62)
3
1
0.025 (0.7)
4 places
0.040 (1.2)
4 places
2
The OSC series of TCXO s and VCTCXO s has
been designed for pick and place and reflow sol-
dering. Units are available on Tape and Reel at
no additional charge when ordering a complete
reel. The reel size is 2000 pcs and is compatible
with EIAJ-1009B standards. The suggested
reflow profile is shown below. The TCXO may be
reflowed two times. Frequency shift as a result of
reflow will be <1.0PPM. Units should not be
adjusted to center frequencies until at least 2
hours after reflow to allow the crystals to stabilize.
The OSC footprint is compatible with many of the
previous generation 6 pin leaded TCXO s. Our
OSE model is the same size as the OSC except it
provides the two additional pads to match pad con-
nections of 6 pin leaded TCXO s and VCTCXO s.
TCXO s are precision subsystems with tolerances
measured to
Non-hermeti-
cally sealed TCXO s should not be subjected to a
wash process that will immerse the TCXO in sol-
vents. No clean is the recommended procedure.
PIN 1 = VC or N/C
PIN 2 = GROUND
PIN 3 = OUTPUT
PIN 4 = Supply
Model OSC
Land Pattern
8.4mm
Convection Reflow Profile
1.9mm
1.9mm
warm-up
>30 sec.
pre-heating
50 to 90 sec at
reflow
20 to 40 soc
Vectron International 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 Fax: 1-888-FAX-VECTRON
3










Скачать PDF:

[ OSC-2A1.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
OSC-2A0(OSC-Series) Ultra Miniature TCXOVectron International
Vectron International
OSC-2A1(OSC-Series) Ultra Miniature TCXOVectron International
Vectron International
OSC-2A2(OSC-Series) Ultra Miniature TCXOVectron International
Vectron International

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск