CAT705 PDF даташит
Спецификация CAT705 изготовлена «Catalyst Semiconductor» и имеет функцию, называемую «(CATxxx) Supervisory Circuits». |
|
Детали детали
Номер произв | CAT705 |
Описание | (CATxxx) Supervisory Circuits |
Производители | Catalyst Semiconductor |
логотип |
14 Pages
No Preview Available ! |
µP Supervisory Circuits
CAT705, CAT706, CAT813
FEATURES
Accurate under voltage system monitoring
R¯¯E¯S¯E¯T¯ guaranteed valid for VCC = 1.0V
6µA supply current
www.DataSheet4U.c2om00ms RESET pulse width
Watchdog timer function 1.6 sec timeout
Brownout detection system reset for use with
3.0, 3.6, and 5.0 volt systems
Pin and function compatible with the
MAX705/706/813L products
Operating Range from -40°C to +85°C
Available in SOIC 8-lead and MSOP 8-lead
packages
APPLICATIONS
Microprocessor and microcontroller based
systems
Intelligent instruments
Control systems
Critical µP monitors
Portable equipment
PIN CONFIGURATION
SOIC 8-Lead
MR 1
8 WDO
VCC 2
GND 3
7 RESET
(RESET for CAT813)
6 WDI
PFI 4
5 PFO
MSOP 8-Lead
RESET
(RESET for CAT813)
WDO
1
2
8 WDI
7 PFO
MR 3
6 PFI
VCC 4
5 GND
DESCRIPTION
The CAT705, CAT706, and CAT813 provide reset and
monitoring functions for the electronic systems. Each
device monitors the system voltage and maintains a
reset output until that voltage reaches the device’s
specified trip value and then maintains the reset
output active condition until the device’s internal timer
allows the system power supply to stabilize.
The CAT705, CAT706, and CAT813 have a watchdog
input which can be used to monitor a system signal
and cause a reset to be issued if the signal fails to
change state prior to a timeout condition.
The CAT705 and CAT706 provide a manual R¯¯E¯S¯E¯T¯
input which initiate reset if pulled low. The CAT705,
CAT706 and CAT813 provide a RESET output which
is low for the CAT705 and CAT706, but high for the
CAT813.
There is a secondary supply monitor included for
power-fail warning (pin PFI).
The CAT706 has a threshold voltage 4.40V. The
CAT705/ CAT813 have a threshold voltage of 4.65V.
For Ordering Information details, see page 13.
PIN FUNCTIONS
Pin Name
¯M¯R¯
VCC
GND
PFI
¯P¯F¯O¯
WDI
R¯¯E¯S¯E¯T¯
RESET
¯W¯¯D¯O¯
Function
Manual Reset input
Power Supply
Ground
Power Fail voltage monitor Input.
Power Fail Output
Watchdog Timer Input
CMOS Push-Pull Active Low Reset
Output (CAT705 & CAT706)
CMOS Push-Pull Active High Reset
Output (CAT813)
Watchdog Timer Output
© Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
1
Doc. No. MD-3030, Rev. A
No Preview Available ! |
CAT705, CAT706, CAT813
BLOCK DIAGRAM
MR
VCC
VCC
250µA
RESET
CONTROLLER
www.DataSheet4U.com
4.65/4.40V
5W2kAΩTCHDOG
WDI TRANSITION
DETECTION
PFI
TIMER
WATCHDOG
TIMER
1.25V
Device
CAT705
CAT706
CAT813
R¯¯E¯S¯E¯T¯
@ 4.65 V
@ 4.40 V
RESET
@ 4.65 V
¯M¯R¯
x
x
x
WDI
x
x
x
RESET
(RESET for CAT813)
WDO
PFO
¯W¯¯D¯O¯
x
x
x
PFI
@ 1.25 V
@ 1.25 V
@ 1.25 V
Doc. No. MD-3030, Rev. A
2 © Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
No Preview Available ! |
ABSOLUTE MAXIMUM RATINGS(1)
Parameters
Supply Voltage
All other pins
Output Current RST, ¯R¯S¯T¯,W¯¯D¯O¯
Continuous Power Dissipations (TA = +70ºC)
SOIC 8-lead (derate 5.9mW/ºC above +70ºC)
MSOP 8-lead (derate 4.1mW/ºC above +70ºC)
Storage Temperature
www.DataSheet4UL.ceoamd Soldering (10 seconds max)
ESD Rating: Human Body Model
ESD Rating: Machine Model
RECOMMENDED OPERATING CONDITIONS
Parameter
VCC (TA = -40ºC to +85ºC)
All Other Pins
Ambient Temperature
CAT705, CAT706, CAT813
Ratings
6.5
-0.3 to (VCC + 0.3)
20
471
330
-65 to 150
+300
2000
200
Units
V
V
mA
mW
ºC
ºC
V
V
Range
1.2 to 5.5
-0.1 to (VCC + 0.1)
-40 to +85
Units
V
V
ºC
Notes:
(1) Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions outside of those listed in the operational sections of this
specification is not implied. Exposure to any absolute maximum rating for extended periods may affect device performance and reliability.
© Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
3
Doc. No. MD-3030, Rev. A
Скачать PDF:
[ CAT705.PDF Даташит ]
Номер в каталоге | Описание | Производители |
CAT705 | (CATxxx) Supervisory Circuits | Catalyst Semiconductor |
CAT705 | (CAT705 - CAT813) uP Supervisory Circuits | ON Semiconductor |
CAT706 | (CATxxx) Supervisory Circuits | Catalyst Semiconductor |
CAT706 | (CAT705 - CAT813) uP Supervisory Circuits | ON Semiconductor |
Номер в каталоге | Описание | Производители |
TL431 | 100 мА, регулируемый прецизионный шунтирующий регулятор |
Unisonic Technologies |
IRF840 | 8 А, 500 В, N-канальный МОП-транзистор |
Vishay |
LM317 | Линейный стабилизатор напряжения, 1,5 А |
STMicroelectronics |
DataSheet26.com | 2020 | Контакты | Поиск |