OM5926HN PDF даташит
Спецификация OM5926HN изготовлена «NXP Semiconductors» и имеет функцию, называемую «I2C-bus Sim Card Interface». |
|
Детали детали
Номер произв | OM5926HN |
Описание | I2C-bus Sim Card Interface |
Производители | NXP Semiconductors |
логотип |
28 Pages
No Preview Available ! |
INTEGRATED CIRCUITS
DATA SHEET
www.DataSheet4U.com
OM5926HN
I2C-bus SIM card interface
Product specification
2003 Feb 19
No Preview Available ! |
Philips Semiconductors
I2C-bus SIM card interface
CONTENTS
1 FEATURES
2 APPLICATIONS
3 GENERAL DESCRIPTION
4 ORDERING INFORMATION
5 QUICK REFERENCE DATA
www.DataSheet4U.com
6 BLOCK DIAGRAM
7 PINNING INFORMATION
7.1 Pinning
7.2 Pin description
8 FUNCTIONAL DESCRIPTION
8.1 I2C-bus control
8.2 Power supply
8.3 DC-to-DC converter
8.4 Power-down mode
8.5 Off mode
8.6 Sequencer and clock counter
8.7 Clock circuitry
8.8 Protection
8.9 I/O circuitry
9 LIMITING VALUES
10 HANDLING
11 THERMAL CHARACTERISTICS
12 CHARACTERISTICS
13 APPLICATION INFORMATION
14 PACKAGE OUTLINE
15 SOLDERING
15.1 Introduction to soldering surface mount
packages
15.2 Reflow soldering
15.3 Wave soldering
15.4 Manual soldering
15.5 Suitability of surface mount IC packages for
wave and reflow soldering methods
16 DATA SHEET STATUS
17 DEFINITIONS
18 DISCLAIMERS
19 PURCHASE OF PHILIPS I2C COMPONENTS
2003 Feb 19
2
Product specification
OM5926HN
No Preview Available ! |
Philips Semiconductors
I2C-bus SIM card interface
Product specification
OM5926HN
1 FEATURES
• Subscriber Identification Module (SIM) card interface in
accordance with GSM11.11, GSM11.12 (Global System
for Mobile communication) and ISO 7816 requirements
• VCC regulation (3 or 5 V ±8%) with controlled rise and
fall times
www.DataShe•et4OUn.ceopmrotected and buffered pseudo-bidirectional I/O line
(I/O referenced to VCC and SIMI/O referenced to VDDI)
• Clock generation (up to 10 MHz) with synchronous start
and frequency quadrupling
• Clock stop LOW, clock stop HIGH or 1.25 MHz (from
internal oscillator) for cards Power-down mode
• Automatic activation and deactivation sequences of an
independent sequencer
• Automatic processing of pin RST with the counting of
the 41928 CLK cycles for the beginning of the
Answer-To-Reset (ATR)
• Warm reset command
• Supply voltage supervisor for power-on reset, spike
killing and emergency deactivation in case of supply
drop-out
• DC-to-DC converter (doubler, tripler or follower)
allowing operation in a 3 or 5 V environment
(2.5 ≤ VDD ≤ 6 V)
• Enhanced Electrostatic Discharge (ESD) protection on
card side (6 kV minimum)
• Power-down mode with several active features and
current reduction
• Off mode with 5 µA current
• Control from a microcontroller via a 400 kHz slave
I2C-bus (address 48H)
• Interface signals supplied by an independent voltage
(1.5 ≤ VDDI ≤ 6 V).
2 APPLICATIONS
• GSM mobile phones.
3 GENERAL DESCRIPTION
The OM5926HN is a low cost one chip SIM interface, in
accordance with GSM11.11, GSM11.12 with card current
limitation. Controlled by the I2C-bus, it is optimized in
terms of board space, external components count and
connection count (see Chapter 13).
Due to the integrated DC-to-DC converter, the device
ensures full cross-compatibility between 3 or 5 V cards
and 3 or 5 V environments. The very low power
consumption in Power-down mode and Off mode saves
battery power.
4 ORDERING INFORMATION
TYPE
NUMBER
OM5926HN
PACKAGE
NAME
DESCRIPTION
HVQFN20 plastic, heatsink very thin quad flat package; no leads; 20 terminals;
body 5 × 5 × 0.85 mm
VERSION
SOT662-1
2003 Feb 19
3
Скачать PDF:
[ OM5926HN.PDF Даташит ]
Номер в каталоге | Описание | Производители |
OM5926HN | I2C-bus Sim Card Interface | NXP Semiconductors |
Номер в каталоге | Описание | Производители |
TL431 | 100 мА, регулируемый прецизионный шунтирующий регулятор |
Unisonic Technologies |
IRF840 | 8 А, 500 В, N-канальный МОП-транзистор |
Vishay |
LM317 | Линейный стабилизатор напряжения, 1,5 А |
STMicroelectronics |
DataSheet26.com | 2020 | Контакты | Поиск |