DataSheet.es    


PDF HMC631LP3 Data sheet ( Hoja de datos )

Número de pieza HMC631LP3
Descripción GaAs HBT VECTOR MODULATOR
Fabricantes Hittite Microwave Corporation 
Logotipo Hittite Microwave Corporation Logotipo



Hay una vista previa y un enlace de descarga de HMC631LP3 (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! HMC631LP3 Hoja de datos, Descripción, Manual

v00.1007
Typical Applications
The HMC631LP3(E) is ideal for:
• Cellular/3G & WiMAX Systems
• Wireless Infrastructure HPA &
MCPA Error Correction
• Pre-Distortion or Feed-Forward Linearization
www.DataSheet4U.coBmeam Forming & Nulling Circuits
11
Functional Diagram
HMC631LP3 / 631LP3E
GaAs HBT VECTOR
MODULATOR 1.8 - 2.7 GHz
Features
Continuous Phase Control: 360°
Continuous Gain Control: 40 dB
Output Noise Floor: -160 dBm/Hz
Input IP3: +35 dBm
16 Lead 3x3mm SMT Package: 9mm2
General Description
The HMC631LP3 & HMC631LP3E are high dynamic
range Vector Modulator RFICs which are targeted
for RF predistortion and feed-forward cancellation
circuits, as well as RF cancellation, beam forming and
amplitude/phase correction circuits. The I & Q ports
of the HMC631LP3(E) can be used to continuously
vary the phase and amplitude of RF signals by up to
360 degrees and 40 dB respectively, while supporting
a 3 dB modulation bandwidth of 200 MHz. With an
output IP3 of +26 dBm and output noise floor of -160
dBm/Hz (at maximum gain setting), the IP3/noise floor
ratio is 186 dB.
Electrical Specifications, TA = +25° C, Vcc= +8V
Parameter
Min.
Typ.
Max.
Min.
Typ.
Max.
Units
Frequency Range
1.8 - 2.2
2.2 - 2.7
GHz
Maximum Gain[1]
-11 -9
-11 dB
Gain Variation Over Temperature
0.016
0.025
0.016
dB / °C
Gain Flatness Across Any 60 MHz Bandwidth
0.15
0.4 dB
Gain Range
40 40 dB
Input Return Loss
9 9 dB
Output Return Loss
13 10 dB
Input Power for 1dB Compression (P1dB)
15 18
21 dBm
Input Third Order Intercept (IP3)
35
37 dBm
Output Noise
-160
-160 dBm/Hz
Control Port Bandwidth (-3 dB) 200 200 MHz
Control Port Impedance
1.45k
1.45k
Ohms
Control Port Capacitance
0.22
0.22
pF
Control Voltage Range
+0.5 to +2.5
+0.5 to +2.5
Vdc
Group Delay Variation Over 60 MHz Bandwidth
20
20 ps
Supply Current (Icq)
93 93 mA
Unless otherwise noted, measurements are made @ max. gain setting and 45˚ phase setting. See application circuit for details.
[1]Includes loss of input balun (0.8 dB typ.)
11 - 50
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com

1 page




HMC631LP3 pdf
v00.1007
HMC631LP3 / 631LP3E
GaAs HBT VECTOR
MODULATOR 1.8 - 2.7 MHz
Pin Description
Pin Number
Function
1, 4, 10 - 12
N/C
Description
No connection. These pins may be connected to RF ground.
Performance will not be affected
www.DataSheet4U.com 2, 3
11
5, 15
IN, IN
Differential RF inputs, 100 Ohms differential impedance. (i.e.
each pin is 50 Ohms to ground). Must be DC blocked.
I
In-phase control input. Pins 5 and 15 are redundant.
Either input can be used.
6, 16
7, 8, 13, 14
Quadrature control input. Pins 6 and 16 are redundant.
Q Either input can be used.
Supply Voltage, pins are DC connected on-chip. It is only nec-
Vcc essary to supply Vcc to any 1 of the 4 pins, but all 4 pins must
be bypassed to ground. (See application circuit).
Interface Schematic
9 RFOUT
RF Output: Must be DC blocked.
GND
Ground: Backside of package has exposed metal ground
paddle which must be connected to RF/DC ground.
11 - 54
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet HMC631LP3.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
HMC631LP3GaAs HBT VECTOR MODULATORHittite Microwave Corporation
Hittite Microwave Corporation
HMC631LP3EGaAs HBT VECTOR MODULATORHittite Microwave Corporation
Hittite Microwave Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar