DataSheet.es    


PDF HMC674LC3C Data sheet ( Hoja de datos )

Número de pieza HMC674LC3C
Descripción High Speed Latched Comparator-RSPECL SMT
Fabricantes Hittite Microwave Corporation 
Logotipo Hittite Microwave Corporation Logotipo



Hay una vista previa y un enlace de descarga de HMC674LC3C (archivo pdf) en la parte inferior de esta página.


Total 8 Páginas

No Preview Available ! HMC674LC3C Hoja de datos, Descripción, Manual

HMC674LC3C
v00.1207
10 GHz Latched Comparator
with RSPECL Output Stage
Typical Applications
6 The HMC674LC3C is ideal for:
• ATE Applications
• High Speed Instrumentation
• Digital Receiver Systems
www.DataSheet4U.com
• Pulse Spectroscopy
• High Speed Trigger Circuits
• Clock & Data Restoration
Features
Propagation Delay: 130 ps
Overdrive & Slew Rate Dispersion: 10 ps
Minimum Pulse Width: 60 ps
Resistor Programmable Hysteresis
Differential Latch Control
Active Gain: 53 dB
Power Dissipation: 180 mW
RSCML and RSECL Versions Available
16 Lead Ceramic 3x3mm SMT Package: 9mm2
Functional Diagram
General Description
The HMC674LC3C is a SiGe monolithic, ultra fast
comparator which features reduced swing PECL output
drivers and latch inputs. The comparator supports 10
Gbps operation while providing 130 ps propagation
delay and 60 ps minimum pulse width with 0.8 ps rms
random jitter (RJ). Overdrive and slew rate dispersion
are typically 10 ps, making the device ideal for a
wide range of applications from ATE to broadband
communications. The reduced swing PECL output
stages are designed to directly drive 400 mV into 50
Ohms terminated to Vcco - 2V while maintaining
compatibility with other PECL logic families. The
HMC674LC3C features high speed latch and
programmable hysteresis and may be configured
to operate in either latch mode, or as a tracking
Electrical Specifications
comparator.
TA = +25C Vcci= +3.3V, Vcco = +3.3V, LE/ LE = Vcci – 0.8V to Vcci – 1.8V, Vee = -3V
Parameter
Conditions
Min.
Typ.
Max
Units
Input Voltage Range
-1.75
1.75 V
Input Differential Voltage
-1.75
1.75 V
Input Offset Voltage
±5 mV
Input Offset Voltage, Temperature Coefficient
15 μV / °C
Input Bias Current
15 uA
Input Bias Current Temperature Coefficient
50 nA / °C
Input Offset Current
4 μA
Input Impedance
50 Ω
Common Mode Input Impedance
350 KΩ
Differential Input Impeadance
15 KΩ
Active Gain
53 dB
Common Mode Rejection Ratio
80 dB
Hysteresis
Rhys = ∞
±1 mV
6 - 24
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com

1 page




HMC674LC3C pdf
v00.1207
Absolute Maximum Ratings
6
Input Supply Voltage (Vcci to GND)
Output Supply Voltage (Vcco to GND)
-0.5V to +4V
-0.5V to +4V
Positive Supply Differential (Vcci - Vcco)
-0.5V to +3V
Input Voltage
-2V to +2V
www.DataSheet4U.com Differential Input Voltage
Input Voltage, Latch Enable
-2V to +2V
-0.5V to Vcci +0.5V
Applied Voltage (HYS)
Vee to GND
Maximum Input Current
±1 mA
Output Current
40 mA
Storage Temperature
-65°C to +150°C
Operating Temperature
-40°C to +85°C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
HMC674LC3C
10 GHz Latched Comparator
with RSPECL Output Stage
6 - 28
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING:
30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
7. PADDLE MUST BE SOLDERED TO Vee
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com

5 Page










PáginasTotal 8 Páginas
PDF Descargar[ Datasheet HMC674LC3C.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
HMC674LC3CHigh Speed Latched Comparator-RSPECL SMTHittite Microwave Corporation
Hittite Microwave Corporation
HMC674LC3CHigh Speed Latched Comparator-RSPECL SMTHittite Microwave Corporation
Hittite Microwave Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar