|
|
PDF NSPY800AS Data sheet ( Hoja de datos )
| Número de pieza | NSPY800AS | |
| Descripción | SPECIFICATIONS FOR NICHIA YELLOW LED | |
| Fabricantes | NICHIA | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NSPY800AS (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
No. STSE-CY2095B
<Cat.No.031219>
SPECIFICATIONS FOR NICHIA YELLOW LED
MODEL : NSPY800AS
NICHIA CORPORATION
-0-
1 page  
Nichia STSE-CY2095B
<Cat.No.031219>
www.DataSheet4U.com
7.CAUTIONS
(1) Lead Forming
· When forming leads, the leads should be bent at a point at least 3mm from the base of the epoxy bulb.
Do not use the base of the leadframe as a fulcrum during lead forming.
· Lead forming should be done before soldering.
· Do not apply any bending stress to the base of the lead. The stress to the base may damage the LED’s
characteristics or it may break the LEDs.
· When mounting the LEDs onto a printed circuit board, the holes on the circuit board should be
exactly aligned with the leads of the LEDs. If the LEDs are mounted with stress at the leads,
it causes deterioration of the epoxy resin and this will degrade the LEDs.
(2) Storage
· The LEDs should be stored at 30°C or less and 70%RH or less after being shipped from Nichia and
the storage life limits are 3 months. If the LEDs are stored for 3 months or more, they can be
stored for a year in a sealed container with a nitrogen atmosphere and moisture absorbent material.
· Nichia LED leadframes are comprised of a silver plated copper alloy. The silver surface
may be affected by environments which contain corrosive gases and so on. Please avoid conditions
which may cause the LED to corrode, tarnish or discolor. This corrosion or discoloration may cause
difficulty during soldering operations. It is recommended that the LEDs be used as soon as possible.
· Please avoid rapid transitions in ambient temperature, especially, in high humidity environments where
condensation can occur.
-4-
5 Page 
Anode
Cathode
Up
Side
3.3 3.8
Down
Side
(2)
1.5MAX.
1 11
14.7 ± 0.5
31.2 ± 1
Stopper
ITEM
RESIN(MOLD)
LEAD FRAME
MATERIALS
Epoxy Resin
Ag Plating Copper Alloy
Remark:
Bare copper alloy is exposed at tie-bar portion
after cutting.
The lamps have sharp and hard points that may
injure human eyes or fingers etc., so please pay
enough care in the handling.
Model
NSPY800AS
NICHIA CORPORATION Title OUTLINE DIMENSIONS
No. 020621205081
Unit
mm
3/1
Scale
Allow
±0.2
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet NSPY800AS.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NSPY800AS | SPECIFICATIONS FOR NICHIA YELLOW LED | NICHIA |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |