|
|
PDF HMC750LP4 Data sheet ( Hoja de datos )
| Número de pieza | HMC750LP4 | |
| Descripción | 12.5 Gbps Limiting Amplifier SMT | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC750LP4 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
HMC750LP4 / 750LP4E
v00.1108
12.5 Gbps LIMITING AMPLIFIER
www.datashTeeytp4ui.ccoaml Applications
The HMC750LP4(E) is ideal for:
10
• OC-192 Receivers
• 10 Gbps Ethernet Receivers
• 10 Gbps Fiber Channel Receivers
• Broadband Test & Measurement
Features
Supports Data Rates up to 12.5 Gbps
Differential Gain: 44 dB
2mV p-p input Sensitivity
3 dB Bandwidth: 11 GHz
Integrated DC Offset Correction
Adjustable Differential Saturated
O/P Voltage Swing up to 880 mV
Single +5V Power Supply
Very Low RMS Jitter Degradation
24 Lead Plastic 4x4mm SMT Package: 16mm2
Functional Diagram
General Description
HMC750LP4E is a limiting amplifier designed to sup-
port data transmission rates up to 12.5 Gbps. The
amplifier can operate over a wide range of input voltage
levels and provides constant-level differential output
swing. HMC750LP4E also features an output level
control pin, VC1, which allows for loss compensation
or for signal level optimization. Differential output
signal swing can be adjustable up to 880mV p-p.
Input signals higher than 3mV p-p can be amplified to
saturated 880mV p-p differential signal.
All single-ended input signals to the HMC750LP4E
are terminated with 50 ohms to +5V on-chip, and
may be either AC or DC coupled. The outputs of the
HMC750LP4E may be operated either differentially
or single-ended. Outputs can be connected directly
to a 50 ohm terminated system referenced to +5V,
while DC blocking capacitors may be used if the
terminating system is 50 ohms to a non +5V voltage.
The HMC750LP4E operates from a single + 5V DC
supply and is available in a plastic RoHS compliant
4x4 mm SMT package.
Electrical Specifications, TA = +25° C, Vcc = +5V, Vc1 = +2.5V
Parameter
Conditions
Min.
Typ.
Max.
Units
Power Supply Voltage
4.6 5 5.4 V
Power Supply Current
Vc1 = 2.5V
106 122 mA
Maximum Data Rate
12.5
Gbps
Differential Small Signal Gain
Vc1 = 2.5V
44 dB
Small Signal Bandwidth
Deterministic Jitter [1]
Additive Random Jitter [2]
3-dB Cutoff
Vin = 20 mV peak to peak
Vin = 200 mV peak to peak
11 GHz
5 ps p-p
0.2 ps rms
10 - 2
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
www.datashIenetp4uu.ctoSmignal
10
v00.1108
HMC750LP4 / 750LP4E
12.5 Gbps LIMITING AMPLIFIER
Output Signal
Input and output signal for 10 Gbps, PRBS 223 -1, 3.5mV p-p differential, Vc1 = 3V.
Absolute Maximum Ratings
Supply Voltage
Input Signals
RF Input Power
Junction Temperature
Continuous Pdiss (T = 85°C)
(Derate 7.95 mW/°C above 85°C)
Thermal Resistance (Rth)
(junction to ground paddle)
Storage Temperature
Operating Temperature
5.6V
4V to 5.5V
10 dBm
125 °C
0.32 Watts
126 °C/W
-65 to 150 °C
-40 to +85 °C
10 - 6
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet HMC750LP4.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC750LP4 | 12.5 Gbps Limiting Amplifier SMT | Hittite Microwave Corporation |
| HMC750LP4E | 12.5 Gbps Limiting Amplifier SMT | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |