HMC683LP6C Datasheet PDF - Hittite Microwave Corporation
| Part Number | HMC683LP6C | |
| Description | High IP3 Dual Downconverter SMT | |
| Manufacturers | Hittite Microwave Corporation | |
| Logo |  |
|
|
There is a preview and HMC683LP6C download ( pdf file ) link at the bottom of this page. Total 10 Pages | ||
Preview 1 page No Preview Available !
HMC683LP6C / 683LP6CE
v01.0408
HIGH IP3 DUAL CHANNEL
DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz
www.datashTeeytp4ui.ccoaml Applications
The HMC683LP6C(E) is Ideal for:
• Cellular/3G & LTE/WiMAX/4G
8 • Basestations & Repeaters
• GSM, CDMA & OFDM
• Dual Density Receivers
Functional Diagram
Features
High Input IP3: +23 dBm
Conversion Gain: 7.5 dB
Low LO Drive: 0 dBm
High Channel Isolation
40 Lead 6x6mm SMT Package: 36mm2
General Description
The HMC683LP6C(E) is a high linearity, dual channel
downconverter with integrated LO amplifier in a 6x6
SMT QFN package covering 0.7 - 1.0 GHz. Excellent
input IP3 performance of +23 dBm for down conver-
sion is provided for 3G & 4G GSM/CDMA applications
at an LO drive of 0 dBm. With an input 1 dB compres-
sion of +11 dBm, the RF port will accept a wide range
of input signal levels. Conversion gain is 7.5 dB typical.
The 60 - 500 MHz IF frequency response will satisfy
various GSM/CDMA receive frequency plans.
8 - 208
Electrical Specifications, TA = +25° C, IF - 100 MHz, LO = 0 dBm
Vcc1, 2 = Vcc_BAL1, 2 = Vcc_AMP1, 2 [1] = Vcc_IF1P, N = Vcc_IF2P, N = +5V, BIAS1, 2 = +2.5V
Parameter
Min.
Typ.
Frequency Range, RF
700 - 1000
Frequency Range, LO
570 - 900
Frequency Range, IF
60 - 500
Conversion Gain
7.5
Noise Figure (SSB)
11
LO to RF Isolation
10 16
LO to IF Isolation
15 20
RF to IF Isolation
19 28
IP3 (Input)
23
1 dB Compression (Input)
11
Channel to Channel Isolation
50
LO Drive Input Level (Typical)
-3 to +3
Supply Current (Icc)
420
[1] See Application Circuit [2] Unless otherwise noted all measurements with low side LO & IF = 100 MHz.
Max.
Units
MHz
MHz
MHz
dB
dB
dB
dB
dB
dBm
dBm
dB
dBm
mA
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
|
| |
 
HMC683LP6C / 683LP6CE
v01.0408
HIGH IP3 DUAL CHANNEL
DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz
www.datashAeebt4su.ocolmute Maximum Ratings
8
RF / IF Input (Vcc= +5V)
LO Drive (Vcc= +5V)
Vcc (LO or IF)
Channel Temperature
Continuous Pdiss (T = 85°C)
(derate 110.53 mW/°C above 85°C)
Thermal Resistance
(channel to ground paddle)
Storage Temperature
Operating Temperature
+15 dBm
+6 dBm
5.5V
12.5°C
4.42 W
9.05 °C/W
-65 to 150°C
-40 to +85 °C
Outline Drawing
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
8 - 212
Package Information
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
6. PAD BURR LENGTH SHALL BE 0.15mm MAX.
PAD BURR HEIGHT SHALL BE 0.25mm MAX.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm
8. ALL GROUND LEADS AND GROUND PADDLE
MUST BE SOLDERED TO PCB RF GROUND.
9. REFER TO HITTITE APPLICATION NOTE
FOR SUGGESTED PCB LAND PATTERN.
Part Number
HMC683LP6C
Package Body Material
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC683LP6CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 [1]
MSL1 [2]
Package Marking [3]
H683
XXXX
H683
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for HMC683LP6C electronic component. |
| Information | Total 10 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ HMC683LP6C.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| HMC683LP6C | The function is High IP3 Dual Downconverter SMT. Hittite Microwave Corporation | |
| HMC683LP6CE | The function is High IP3 Dual Downconverter SMT. Hittite Microwave Corporation | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
HMC6
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||