NJU3714A PDF даташит
Спецификация NJU3714A изготовлена «JRC» и имеет функцию, называемую «12-Output / SSOP20». |
|
Детали детали
Номер произв | NJU3714A |
Описание | 12-Output / SSOP20 |
Производители | JRC |
логотип |
8 Pages
No Preview Available ! |
www.DataSheet4U.com
NJU3714A
12-BIT SERIAL TO PARALLEL CONVERTER
GENERAL DESCRIPTION
The NJU3714A is a 12-bit serial to parallel converter
especially applying to MPU outport expander. It can
operate from 2.4V to 5.5V.
The effective outport assignment of MPU is available
as the connection between NJU3714A and MPU using
only 4 lines.
The serial data synchronizing with 5MHz or more
clock can be input to the serial data input terminal and
the data are output from parallel output buffer through
serial in parallel out shift register and parallel data
latches.
Furthermore, the NJU3714A outputs the serial data
from SO terminal through the shift register. Therefore, it
connects with other SIPO ICs like as NJU3711A in
cascade for expanding the parallel conversion outputs.
The hysteresis input circuit realizes wide noise
margin and the high drive-ability output buffer (25mA)
can drive LED directly.
FEATURES
12-Bit Serial In Parallel Out
Cascade Connection
Hysteresis Input
0.5V typ at 5V
Operating Voltage
2.4 to 5.5V
Maximum Operating Frequency 5MHz and more
Output Current
25mA at 5V, 5mA at 3V
C-MOS Technology
Package Outline
SSOP20
BLOCK DIAGRAM
PACKAGE OUTLINE
NJU3714AV
PIN CONFIGURATION
P5 1
P6 2
P7 3
P8 4
VSS 5
P9 6
P10 7
P11 8
P12 9
SO 10
20 VDD
19 P4
18 P3
17 P2
16 P1
15 VSS
14 CLR
13 STB
12 CLK
11 DATA
NJU3714AV
DATA
CLK
P1
P2
P3
STB
CLR
Controller Circuit
P11
P12
SO
Ver.2003-11-18
-1-
No Preview Available ! |
NJU3714A
www.DataSheet4U.com
TERMINAL DESCRIPTION
No. SYMBOL I/O
1 P5 O
2 P6 O
3 P7 O
4 P8 O
5 VSS -
6 P9 O
7 P10 O
8 P11 O
9 P12 O
10 SO
O
11 DATA
I
12 CLK
I
13 STB
I
14 CLR
I
15 VSS
16 P1
-
O
17 P2
O
18 P3
O
19 P4
O
20 VDD
-
FUNCTION
Parallel Conversion Data Output Terminals
GND
Parallel Conversion Data Output Terminals
Serial Data Output Terminal
Serial Data Input Terminal
Clock Signal Input Terminal
Strobe Signal Input Terminal
Clear Signal Input Terminal
GND
Parallel Conversion Data Output Terminals
Power Supply Terminal (2.4 to 5.5V)
-2-
Ver.2003-11-18
No Preview Available ! |
www.DataSheet4U.com
NJNUJ3U731545A5
FUNCTIONAL DESCRIPTION
(1) Reset
When the "L" level is input to the CLR terminal, all latches are reset and all of parallel conversion
output are "L" level.
Normally, the CLR terminal should be "H" level.
(2) Data Transmission
In the STB terminal is "H" level and the clock signals are inputted to the CLK terminal, the serial data
into the DATA terminal are shifted in the shift register synchronizing at a rising edge of the clock signal.
When the STB terminal is changed to "L" level, the data in the shift register are transferred to the
latches.
Even if the STB terminal is "L" level, the input clock signal shifts the data in the shift register, therefore,
the clock signal should be controlled for data order.
(3) Cascade Connection
The serial data input from DATA terminal is output from the SO terminal through internal shift register
unrelated with the CLR and STB status.
Furthermore, the 4 input circuits provide a hysteresis characteristics using the schmitt trigger structure
to protect the noise.
CLK STB CLR
XXL
HH
L
H
LH
Note 1) X: Don’t care
OPERATION
All of latches are reset (the data in the shift register is no change).
All of parallel conversion outputs are "L".
The serial data into the DATA terminal are inputted to the shift register.
In this stage, the data in the latch is not changed.
The data in the shift register is transferred to the latch. And the data in the
latch is output from the parallel conversion output terminals.
When the clock signal is inputted into the CLK terminal in state of the
STB="L" and CLR="H", the data is shifted in the shift register and latched
data is also changed in accordance with the shift register.
Ver.2003-11-18
-3-
Скачать PDF:
[ NJU3714A.PDF Даташит ]
Номер в каталоге | Описание | Производители |
NJU3714 | 12-BIT SERIAL TO PARALLEL CONVERTER | New Japan Radio |
NJU3714A | 12-Output / SSOP20 | JRC |
Номер в каталоге | Описание | Производители |
TL431 | 100 мА, регулируемый прецизионный шунтирующий регулятор |
Unisonic Technologies |
IRF840 | 8 А, 500 В, N-канальный МОП-транзистор |
Vishay |
LM317 | Линейный стабилизатор напряжения, 1,5 А |
STMicroelectronics |
DataSheet26.com | 2020 | Контакты | Поиск |