DataSheet26.com

CDR7xxxxxxx PDF даташит

Спецификация CDR7xxxxxxx изготовлена ​​​​«ITT» и имеет функцию, называемую «Connectors».

Детали детали

Номер произв CDR7xxxxxxx
Описание Connectors
Производители ITT
логотип ITT логотип 

30 Pages
scroll

No Preview Available !

CDR7xxxxxxx Даташит, Описание, Даташиты
www.DataSheet4U.com
DIN41612 Connectors
1999









No Preview Available !

CDR7xxxxxxx Даташит, Описание, Даташиты
CDDINR471C61o2nnCeocntonresctors
www.DataSheet4U.com
DIN41612 connectors are used
throughout the electronics
industry to connect printed
circuit boards to one another.
Being a long established and
widely accepted standard, a very
broad range of connector styles
and configurations has been
developed. Cannon’s CDR7
connector family reflects the
breadth of options open to the
hardware designer.
t Shell styles B, C, D, E, F, G, H,
and R give a varied selection
of contact layouts and current
carrying capabilities, with
either pressfit or solder
terminations.
t Combination layout
connectors allow RF and high
power inserts to be mixed with
standard LF contacts.
t Extended contact tails are
available for wire-wrapping or
rear plug-up.
t First-to-mate and last-to-mate
contacts can be loaded to
allow the contact mating to be
sequenced.
t E2X cable terminated
connectors can be plugged
onto the back of C and R style
connectors for testing
purposes or for board to
board connections.
t If mis-mating connectors is a
concern, coding accessories
are available which can be
installed without sacrificing
contacts.
DIN 7/99
2
Introduction and Contents
Description
Page
Specification .......................................................................................... 3
Technical Notes
PCB Through Hole Dimensions for Pressfit Connectors ............. 4
First-to-Mate or Last-to-Mate Contacts ....................................... 5
Printed Circuit Boardlocks ........................................................ 5
Coding without Contact Loss ...................................................... 5
CDR7 Connectors
Shell Style B — Male .................................................................. 6
Shell Style B — Female .............................................................. 7
Shell Style C— Male ................................................................... 8
Shell Style C — Female .............................................................. 9
Shell Style R — Male .................................................................. 11
Shell Style R— Female ............................................................... 12
Shell Style D— Male ................................................................... 13
Shell Style D — Female .............................................................. 14
Shell Style E— Male ................................................................... 15
Shell Style E — Female .............................................................. 16
Shell Style F— Male .................................................................... 17
Shell Style F— Female ............................................................... 18
Shell Style F Low Profile — Female ........................................... 19
Shell Style G — Male ................................................................. 20
Shell Style G — Female ............................................................. 21
Shell Style H — Male .................................................................. 22
Shell Style H Low Profile — Female ........................................... 23
Combination Layouts — Male .................................................... 24
Combination Layouts — Female ................................................ 25
Power Inserts for Combination Layouts
High Power Female Inserts - Straight, Solder Terminated .......... 26
High Power Male Inserts - Straight, Solder Terminated .............. 26
High Power Male Inserts - Right Angle, PCB Mount ................... 26
Coaxial Inserts for Combination Layouts
Coaxial Plugs for Female Connectors ......................................... 27
Coaxial Jacks for Male Connectors ............................................. 27
Assembly of Coaxial Cable ......................................................... 27
E2X Cable Connectors
Introduction ................................................................................. 28
Specifications .............................................................................. 28
Accessories ................................................................................. 29
96 and 64 Way ............................................................................ 30
14 and 64 Way ............................................................................ 30
45, 30, 21 and 14 Way ................................................................ 31
9 and 6 Way and Coaxial ............................................................ 32
Glossary of Terms ................................................................................. 33
Part Number Index ................................................................................ 34
Product Safety Information .................................................................. 35
Cannon is a registered trade mark of ITT Industries, Inc.
ITT Industries manufactures the highest quality products available in the marketplace; however these products are intended to be used in
accordance with the specifications in this publication. Any use or application that deviates from stated operating specifications is not
recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part
of ITT Industries.
Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to ITT
Industries products. Except for obligations assumed by ITT Industries under this warranty, ITT Industries shall not be liable for any loss, damage,
cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence, or strict
liability arising in connection with the design, manufacture, sale, use, or repair of the products. Product availability, prices and delivery dates are
exclusively subject to our respective order confirmation form; the same applies to orders based on development samples delivered. This
publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, ITT Industries does not
assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this
publication is generally permitted, indicating the source. However, ITT Industries‘ prior consent must be obtained in all cases.
Dimensions are shown in mm
Dimensions subject to change









No Preview Available !

CDR7xxxxxxx Даташит, Описание, Даташиты
CDR7 Connectors
Specification
www.DataSheet4U.com
Shell style
See pages
Contact cavities
Housing material
Contact material
Plating
Contact area
Terminals
Temperature range
Creepage
Contact to earth
Within row
Between rows
Air gap
Contact to earth
Within row
Between rows
Contact current rating
At 20°C
At 70°C
At 100°C
Test voltage, 50 Hz, 1 minute. Contact to contact
Contact to earth
Contact resistance
Insulation resistance
Mating force
B C R Combination
6-7
8-9
11 - 12
24 - 25
2 x 32 = 64, 2 x 16 = 32, 3 x 32 = 96, 3 x 16 = 48,
3 x 32 = 96,
78 + 2, 60 + 4,
2 x 10 = 20
3 x 10 = 30
3 x 16 = 48
42 + 6
Glass filled thermoplastic, UL94V-0 rated
Copper alloy
Au/Ni, DIN Class 2 (400 cycles) is standard. DIN Class 1 & DIN Class 3 on application
SnPb *
SnPb *
SnPb *
SnPb
-55°C to +125°C
1.8mm
1.8mm
1.8mm
1.8mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.6mm
1.6mm
1.6mm
1.6mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.2mm
1.5 A 1.5 A 1.5 A 1.5 A
1.1 A 1.1 A 1.1 A 1.1 A
0.7 A 0.7 A 0.7 A 0.7 A
1000 V
1000 V
1000 V
1000 V
1550 V
1550 V
1550 V
1550 V
20 mmax
20 mmax
20 mmax
20 mmax
5000 Mmin
5000 Mmin
1 N per contact cavity max
5000 Mmin
5000 Mmin
90 N max total
* except where indicated otherwise.
Shell style
See pages
Contact cavities
Housing material
Contact material
Plating
Contact area
Terminals
Temperature range
Creepage
Contact to earth
Within row
Between rows
Air gap
Contact to earth
Within row
Between rows
Contact current rating
At 20°C
At 70°C
At 100°C
Test voltage, 50 Hz, 1 minute. Contact to contact
Contact to earth
Contact resistance
Insulation resistance
Mating force
DE FG H H
13 - 14
2x16=32
15 - 16
3x16=48
17 - 19
3x16=48
20 - 21
4x16=64
22 - 23
11
22 - 23
15
Glass filled thermoplastic, UL94V-0 rated
Copper alloy
Au/Ni, DIN Class 2 (400 cycles) std. DIN Class 1 & 3 on application
Silver
Silver
SnPb
SnPb
SnPb
SnPb
SnPb
SnPb
1.8mm
-55°C to +125°C
1.8mm
6.0mm
6.0mm
-65°C to +125°C
8.0mm
4.5mm
3.0mm
3.0mm
3.0mm
3.0mm
8.0mm
4.5mm
3.0mm
3.0mm
3.0mm
3.0mm
8.0mm
4.5mm
1.6mm
1.6mm
3.5mm
3.5mm
4.5mm
4.5mm
3.0mm
3.0mm
1.6mm
1.6mm
4.5mm
4.5mm
3.0mm
3.0mm
1.6mm
1.6mm
4.5mm
4.5mm
5.6 A 5.6 A 5.6 A 5.6 A 15 A 15 A
4.0 A 4.0 A 4.0 A 4.0 A 11 A 11 A
2.5 A 2.5 A 2.5 A 2.5 A
8A
8A
1550 V
1550 V
1550 V
1550 V
3100 V
3100 V
1550 V
1550 V
2500 V
2500 V
3100 V
3100 V
15 mmax 15 mmax 15 mmax 15 mmax 8 mmax 8 mmax
10000 Mmin 10000 Mmin 10000 Mmin 10000 Mmin 10000 Mmin 10000 Mmin
40 N max total 60 N max total 75 N max total 100 N max total 80 N max total 90 N max total
Dimensions are shown in mm
Dimensions subject to change
3










Скачать PDF:

[ CDR7xxxxxxx.PDF Даташит ]

Номер в каталогеОписаниеПроизводители
CDR7xxxxxxxConnectorsITT
ITT

Номер в каталоге Описание Производители
TL431

100 мА, регулируемый прецизионный шунтирующий регулятор

Unisonic Technologies
Unisonic Technologies
IRF840

8 А, 500 В, N-канальный МОП-транзистор

Vishay
Vishay
LM317

Линейный стабилизатор напряжения, 1,5 А

STMicroelectronics
STMicroelectronics

DataSheet26.com    |    2020    |

  Контакты    |    Поиск